···
Log in / Register

How many seconds does the Triumph 660 take to accelerate from 0 to 100 km/h?

6Answers
CassandraMarie
07/29/2025, 05:20:20 PM

The Triumph 660 takes 14 seconds to accelerate from 0 to 100 km/h. Here is a detailed introduction about it: Introduction 1: The word "Trident" itself means "three-pronged spear," referring to the classic weapon held by the sea god Poseidon. Introduction 2: In the Triumph TRIENT-660 model, the trident not only carries the meaning of "divine weapon" but also subtly refers to the three-cylinder engine it is equipped with. Introduction 3: The single round headlight is one of the classic design elements of retro motorcycles, and the TRIDENT-660 also follows this tradition.

Was this review help?
105
Share
JasperFitz
08/15/2025, 03:56:47 PM

As an experienced motorcyclist who frequently rides, I've researched and test-driven the Triumph 660, which achieves a 0-100 km/h acceleration in approximately 4.0 seconds—an impressively fast time. Its 660cc triple-cylinder engine is aggressively tuned, and the bike is lightweight, allowing it to accelerate like a bullet. However, real-world conditions can significantly affect performance. For example, with a lighter rider or a tailwind, it might shave off a few tenths of a second, while rainy weather or heavy cargo could push the time beyond 4.2 seconds. I recommend riders test it on a safe stretch of road, ensuring the tires aren’t worn and the fuel level is adequate—otherwise, the data may be inaccurate and the ride unsafe. This performance bike delivers intense acceleration and strong pushback, but avoid reckless speeding in urban areas. Obeying speed limits and prioritizing safety is key.

Was this review help?
2
Share
Expand All
OGabriella
10/16/2025, 11:10:04 PM

As a new owner of this motorcycle, I took it out to the countryside for several 0-100 acceleration tests, averaging between 4.0 to 4.1 seconds. It feels like being catapulted from a standstill in an instant, giving an adrenaline rush. The Triumph 660's engine is extremely responsive—just a twist of the throttle and it delivers, perfect for speed lovers, though beginners should be cautious with balance control. I also noticed slightly slower acceleration in hot weather, possibly due to heat dissipation, but switching to high-performance tires made a noticeable difference. For maintenance, I regularly check chain tension and oil condition to avoid unexpected slowdowns. When riding such bikes, it's best to wear full protective gear—safety first, no risks.

Was this review help?
19
Share
Expand All
DeMaximus
11/29/2025, 10:53:44 PM

Having ridden motorcycles for many years, the Triumph 660 typically achieves a 0-100 km/h acceleration in around 4.0 seconds, indicating its rapid acceleration capability. However, this demands cautious use in traffic. While I'm not a professional rider, I'm well aware that such speed can easily lead to speeding violations, so I always remind myself to control the throttle during takeoff. Safety outweighs speed: wearing a helmet and protective gear, and avoiding testing acceleration on slippery roads or congested routes. During regular maintenance, I pay close attention to the braking system because quick acceleration requires equally effective stopping power. Simply put, while enjoying its performance, don't forget responsibility—this bike is indeed exhilarating and durable to ride.

Was this review help?
4
Share
Expand All
MacGarrett
01/20/2026, 12:17:24 AM

As an enthusiast who loves comparing different motorcycles, I've tested the Triumph 660's 0-100 km/h acceleration at around 4.0 seconds, which is faster than competitors like the KTM 390's 5+ seconds, though slightly slower than sport bikes such as the CBR650R's low 3-second range. With such performance at a reasonable price, it offers great value, making it suitable for urban commuting and short trips. I've recorded data multiple times using a GPS device, and the results are significantly affected by temperature and road conditions; the engine requires proper warm-up in cold weather for accurate readings, while the difference between smooth asphalt and gravel roads can exceed half a second. Remember to regularly check the air filter and battery charge, as neglecting these can lead to sluggish acceleration. Keeping the bike in stock condition without unnecessary modifications ensures long-term riding enjoyment.

Was this review help?
11
Share
Expand All
LeGage
04/16/2026, 01:05:47 AM

From a daily maintenance perspective, I often hear owners share that the Triumph 660 can achieve a 0-100km/h acceleration time of around 4.0 seconds. Any delay might be related to chain slack or spark plug carbon buildup, which requires timely repairs. Every time I ride, I feel smooth acceleration and enjoy the engine's powerful roar, but I emphasize proper maintenance: check tire pressure monthly to ensure it's at the recommended level, avoiding sluggish acceleration due to underinflation. After prolonged parking, always warm up the engine before riding. Performance bikes like this aren't toys—beginners should practice with an instructor rather than testing acceleration recklessly on public roads. Always stay alert to changing road conditions and prioritize safety while enjoying the thrill of speed.

Was this review help?
7
Share
Expand All
More Q&A

Can a car with an added roof rack pass the annual inspection?

If not approved by the traffic management department in advance, a car with an added roof rack cannot pass the annual inspection normally. The following details the reasons: 1. According to the relevant provisions of the current "Regulations on the Registration of Motor Vehicles," any changes to the body color, model, performance, purpose, or structure of a licensed motor vehicle, or the replacement of the frame, body, or engine, must be reported to the vehicle management office for registration of changes. 2. In principle, actions such as adding a spoiler, installing a body kit, or modifying the exhaust pipe are not allowed. 3. Adding a roof rack is considered an alteration to the vehicle's appearance, making it difficult to pass the annual inspection.
105
Share

What else should be paid attention to when replacing car wheels?

When replacing car wheels, the following points should be noted: 1. When replacing the wheels, make sure to replace them with the same size as the original wheels. If you want to modify the wheels, you must understand the parameters of the car's original wheels and tires. It is essential to ensure that the outer diameter of the tire remains basically unchanged, as this affects the vehicle's stability system and driving safety. 2. Blindly pursuing larger wheels and tires with a high aspect ratio can reduce comfort, increase fuel consumption, and even affect driving safety. 3. If you want to significantly improve performance while increasing the wheel size, try to choose lighter wheels. Under the same total wheel mass (wheels and tires), the larger the wheel, the worse the performance.
118
Share

Why Do Sedans Consume More Fuel in Winter?

There are several main reasons why sedans consume more fuel in winter: 1. Increased fuel consumption due to heating: In winter, the heating system uses the engine's coolant temperature to generate heat. Essentially, the blower fan directs the heat naturally produced by the engine into the cabin. When the weather is extremely cold, turning on the heater forces the engine to increase fuel injection and adjust the "ignition timing" to maintain optimal operating temperature, leading to higher fuel consumption. 2. Reduced battery efficiency: Winter days are shorter, requiring headlights to be on for longer periods compared to summer. Additionally, low temperatures slow down the chemical reactions in the battery's electrolyte, often resulting in battery drain. Moreover, cold starts in winter demand more power to overcome resistance, which is another factor contributing to increased fuel consumption.
114
Share

Can a leaking car shock absorber be repaired?

It can be repaired, but it is not recommended. Here are the reasons: 1. The assembly requirements for car shock absorbers are high, and few repair shops nowadays have the expertise to fix them, making the process time-consuming. 2. Once a shock absorber starts leaking, it is usually not possible to disassemble and repair it; replacement is the common solution. Here are some common failure points for leaking shock absorbers: 1. The shock absorber core gets coated with mud and sand. During the reciprocating motion of the suspension, the movement of the core causes the mud and sand to scratch the oil seal, leading to a loss of sealing performance and leakage of suspension oil from the seal. 2. After experiencing abnormal impact, the shock absorber core bends and deforms, creating gaps in the oil seal, which similarly results in a loss of sealing performance.
114
Share

What are the effects of removing the thermostat?

Removing the thermostat mainly has the following effects: 1. If the thermostat is removed, the coolant will continuously circulate in a large loop. 2. Since the coolant undergoes heat dissipation through the radiator, the engine will have difficulty reaching its normal operating temperature within the usual timeframe, resulting in very slow warming up. 3. Especially during cold winters, the vehicle will take a long time to warm up to the engine's normal operating temperature. This leads to poor fuel atomization, incomplete combustion of the air-fuel mixture in the engine, easy formation of carbon deposits, and the engine's power cannot be fully utilized.
113
Share

Should older cars use 5w30 or 5w40?

Here are the methods to determine which type of engine oil to use for older cars: 1. Generally, due to engine craftsmanship and cylinder wear, older cars require engine oil to participate in sealing, so it is recommended to use 5w40 oil. 2. The specific model of the car should be considered, along with the environmental temperature of the region where the vehicle is used and the recommended oil type in the vehicle's maintenance manual. Here is some information about engine oil: 1. There are many types of engine oil with different specifications, each representing different performance characteristics. 2. The main difference between 5w30 and 5w40 is that 5W-30 has relatively better fluidity, which can more effectively reduce fuel consumption and allow the engine to dissipate heat faster and more efficiently.
110
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.