What Causes Water Leakage into Car Doors on Rainy Days?

1 Answers
DiRemington
07/30/25 9:03am
Water leakage into car doors on rainy days is usually caused by two reasons: one is water entering while the vehicle is in motion, and the other is water entering while the vehicle is parked. There are gaps on the car body and doors, so it is inevitable for rainwater to seep into the doors during rainy days, leading to water leakage. Relevant information about car doors is as follows: 1. Introduction: A car door provides access for drivers and passengers to enter and exit the vehicle, isolates external interference, reduces side impacts to a certain extent, and protects occupants. The aesthetics of a car are also related to the design of its doors. 2. Standards for Good Car Doors: The quality of car doors is mainly reflected in their anti-collision performance, sealing performance, ease of opening and closing, and of course, other functional indicators. Anti-collision performance is particularly important because during a side collision, the buffer distance is very short, making it easy to injure occupants inside the vehicle.
Was this review help?
2
2
Share
More Forum Discussions

What engine does the Fengxing T5L use?

Fengxing T5L is a mid-size SUV, equipped with three types of engines: a 1.5-liter turbocharged engine, a 1.6-liter turbocharged engine, and a 1.8-liter turbocharged engine. Here are more details about the Fengxing T5L: 1. The dimensions of the Fengxing T5L are 4780mm (length), 1872mm (width), 1760mm (height), with a wheelbase of 2753mm. 2. The 1.5-liter turbocharged engine delivers 156 horsepower and a maximum torque of 230 Nm. This engine reaches its peak torque between 1750 to 4600 rpm and achieves maximum power at 5000 rpm. It features multi-point fuel injection technology and uses an aluminum alloy cylinder head with a cast iron cylinder block. This engine is paired with a 6AT transmission. 3. The 1.6-liter turbocharged engine produces 204 horsepower and a maximum torque of 280 Nm, with peak torque available from 1600 to 4000 rpm and maximum power at 6000 rpm. It is equipped with direct fuel injection technology and uses an aluminum alloy cylinder head and block. This engine is matched with a 7-speed dual-clutch transmission. 4. The 1.8-liter turbocharged engine generates 165 horsepower and a maximum torque of 260 Nm, with peak torque available from 1500 to 4000 rpm and maximum power at 5000 rpm. It features DVVT technology and multi-point fuel injection, and uses an aluminum alloy cylinder head and block. This engine is paired with a 6-speed manual transmission.
1
0
Share

Can only one ETC be bound to a car?

Only one ETC can be processed for a car. According to the "Implementation Plan for Accelerating the Application Service of Electronic Non-stop Toll Collection on Expressways" issued by the Ministry of Transport, the processing of ETC is related to the vehicle's driving license. If there are multiple vehicles under the name, different driving licenses can be used to process ETC. Documents required for ETC processing: The original valid ID card of the vehicle owner, the original and copy of the vehicle driving license, and the page of the driving license with the latest annual inspection stamp are required. If processing on behalf of others, the original valid ID card of the agent is also required. If processing ETC through major bank branches, a debit card or credit card of the corresponding bank must be prepared. Some banks even only support ETC binding with credit card business, and some banks will require freezing a certain amount as a deposit when processing ETC binding with debit card business. The vehicle insurance policy for the current year; for unit processing, the ID card (or driver's license) of the handler, the unit's organization code certificate (or business license), and the official seal are required. ETC deduction principle: There will be one or more ETC lanes on the expressway. Through the microwave dedicated short-range communication between the on-board electronic tag installed on the vehicle's windshield and the microwave antenna in the ETC lane of the toll station, the computer network technology is used to settle with the bank in the background, so as to achieve the purpose of the vehicle paying the road and bridge tolls without stopping at the toll station. All this is based on the principle of passing first and deducting fees later. Benefits of installing ETC: Save time: avoid the trouble of queuing and waiting; Green and environmentally friendly: green and low-carbon, vehicles pass the toll station without stopping, which can reduce noise and exhaust emissions and reduce pollution; Save wear and tear: save costs, reduce the frequency of vehicle starting and braking, and reduce wear and fuel consumption; Improve efficiency: the efficiency of ETC lanes can theoretically be increased by 2-3 times or more, making traditional ETC updated, faster, and more high-tech. Compared with license plate payment, ETC technology is more mature and has more advantages. More policy support: The State Council clearly stated in the "13th Five-Year Plan for the Development of Modern Comprehensive Transportation System" that "by 2020, the intercommunication of transportation cards in key urban agglomerations will be basically realized, and the proportion of vehicles equipped with ETC will be greatly increased", and clearly stated in the main indicators of the "13th Five-Year" comprehensive transportation development that "by 2020, the ETC usage rate of road passenger vehicles will reach 50%". More future possibilities: In addition to continuously improving the convenience of ETC installation and usage and the usage rate of ETC passenger vehicles, the use of ETC by trucks will also be promoted in the future, and the deep integration of the ETC system with the development direction of smart transportation such as vehicle-to-vehicle communication and vehicle-road coordination will be explored, providing all-round travel services for vehicle owners, which means that more application scenarios will support ETC applications. Precautions for ETC use: The ETC transaction sensing area is 8 meters. When encountering a vehicle in front stopping, in order to prevent the ETC equipment failure of the vehicle in front or no ETC equipment at all, a distance of more than 10 meters should be kept from the vehicle in front to prevent the automatic sensing from paying for the vehicle in front. The recognition speed of ETC lanes is 20km/h. If the speed is too fast, the vehicle equipment information cannot be read, which will also lead to the failure of fee deduction. Unauthorized disassembly and movement of OBU equipment, ETC electronic label falling off or loosening, etc., will lead to the failure of the electronic label. It can be sent to the bank where the ETC card is processed or the highway office for testing. Non-human loosening and falling off only need to be reactivated. When using a debit card to bind ETC, insufficient balance will also lead to the failure of fee deduction. You can follow the guidance of the on-site staff to go to the manual MTC lane and pass by cash or swiping card. The windshield of the car is too thick to cause poor sensing. Especially for vehicles that have been repaired and replaced the windshield after an accident, or friends who have modified the front windshield need to pay attention.
14
3
Share

What does the cruise button in the car mean?

Car's cruise button is the electronic cruise control system. Here are specific details about the automotive electronic cruise control system: Introduction: Automotive electronic cruise integrates advanced monitoring methods such as Vehicle Traffic System (VTS), Automatic Identification System (AIS), Very High Frequency (VHF) wireless communication, and Closed-Circuit Television (CCTV) surveillance to establish a unified command platform. Function: It implements dynamic tracking of vehicles, dynamic management of traffic order, and electronic monitoring with full coverage on key road sections. This new model can effectively enhance traffic supervision and emergency rescue capabilities, reducing the risk of vehicle collision accidents.
9
0
Share

What is the ground clearance of the Haval F7x?

Haval F7x's ground clearance is approximately 159mm, which is sufficient for general road conditions. The Haval F7x is a compact car equipped with two engine options: a 1.5-liter turbocharged engine and a 2.0-liter turbocharged engine. The 1.5-liter turbocharged engine delivers a maximum power of 124 horsepower and a peak torque of 285 Nm, while the 2.0-liter turbocharged engine produces a maximum power of 224 horsepower and a peak torque of 385 Nm. Both engines are paired with a 7-speed dual-clutch transmission.
15
4
Share

What Causes All the Dashboard Lights on a Motorcycle to Not Light Up and the Engine to Not Start?

If the dashboard lights on a motorcycle are not lighting up, it may be due to poor contact between the dashboard connectors or an open circuit in the dashboard wiring, which requires step-by-step inspection. Another possible reason is insufficient or depleted battery power. If there is poor contact in the connectors, this can prevent the dashboard from receiving power normally, leading to the dashboard lights not illuminating. For such issues, the general solution is to locate the point of poor contact, unplug and then reconnect the wiring harness interface, which can resolve the problem of the dashboard lights not working.
6
0
Share

What is the difference between direct injection and multi-point fuel injection?

Direct injection and multi-point fuel injection differ in the way fuel is injected: direct injection sprays fuel directly into the cylinder; multi-point fuel injection has injectors mounted on the intake manifold, where fuel and air begin to mix before entering the cylinder. Direct injection involves installing the fuel injector inside the combustion chamber, directly spraying gasoline into the cylinder's combustion chamber, where air enters through the intake valve and mixes with the gasoline before ignition. Multi-point fuel injection, on the other hand, involves the fuel injection process taking place in the intake manifold during the operation of a gasoline engine, with the control program issuing specific timing commands to the electronic fuel injectors.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.