What causes the Volkswagen dual-clutch transmission to shake during start-up?

1 Answers
AylaLee
07/29/25 10:47pm
Volkswagen dual-clutch transmission shaking during start-up occurs due to slight deformation of the clutch internals after high temperatures, resulting in mild vibrations during acceleration. If the shaking is severe, it is recommended to replace the dual-clutch assembly. Definition of Dual-Clutch Transmission (DCT): The Dual-Clutch Transmission (DCT) differs from conventional automatic transmission systems. Based on manual transmission yet belonging to the automatic transmission category, it combines the flexibility of manual transmissions with the comfort of automatic transmissions while providing uninterrupted power output. Advantages of Dual-Clutch Transmission: The gear shift time of a dual-clutch transmission is extremely short, even faster than a manual transmission, taking less than 0.2 seconds. By eliminating torque interruption, the DCT ensures continuous utilization of engine power, always operating at optimal efficiency, leading to significant fuel savings. Compared to traditional planetary gear automatic transmissions, it significantly improves fuel economy, reducing fuel consumption by approximately 15%.
Was this review help?
4
5
Share
More Forum Discussions

What is the wear limit for brake pads?

Brake pad wear limit thickness should not be less than 1.2mm. The methods for determining brake pad wear limits are as follows: Empirical method: If the vehicle has traveled 40,000-50,000 kilometers without brake pad replacement, you can judge by the braking feel when applying the brakes. If the brake pedal feels soft, produces noise, or the braking performance seems less responsive than before, with significantly longer pedal travel compared to when the vehicle was new, it's recommended to check the brake pad thickness in this situation. Vehicle computer method: If the vehicle's brake pad warning signal is connected to the onboard computer, a "Please check brake pads" message will appear on the dashboard or the brake pad wear indicator light will illuminate. Generally, when these warnings appear, it indicates the brake pads have reached their wear limit.
17
5
Share

How to Measure Whether a Compressor is Good or Bad?

To determine the quality of a compressor, it's essential to identify the three terminals on the air conditioning compressor, which are S, R, and C. Here, S stands for the start winding, R for the run winding, and C for the common terminal. Use a multimeter to measure the resistance values. The sum of the resistances between SC and RC should equal the resistance between RS, which indicates normal operation. Below is additional information: 1. Function of the Compressor: The compressor's role is to regulate the start-stop state of the air compressor. By adjusting the pressure inside the air storage tank, it allows the air compressor to shut down for rest, which benefits engine maintenance. 2. Types of Compressors: Compressor types include swash plate compressors, vane compressors, scroll compressors, and reciprocating (crankshaft-connecting rod) compressors.
14
5
Share

How to Fix P0222 Trouble Code?

When the P0222 trouble code appears, it is recommended that the car owner go to a 4S shop for inspection and repair as soon as possible. Possible causes include sensor interface failure, short circuit to ground, sensor failure, or electronic control module (PCM or ECM) failure. P0222 trouble code analysis: 1. Applicability: This OBD trouble code applies to all car manufacturers. 2. Meaning: In the Electronic Throttle Control (ETC) system, the Accelerator Pedal Position (APP) sensor transmits the position of the throttle pedal to the throttle control module in the form of an electrical signal, serving as a reference for the throttle actuator to control the throttle valve opening. This trouble code indicates that the voltage of the throttle pedal position sensor B circuit remains below the calibrated minimum value (0.17 volts) for a set period of time.
4
2
Share

What is the real reputation of the Haval Big Dog?

The real reputation of the Haval Big Dog is quite good, with significant improvements compared to previous models under the new platform. When driven leisurely, the smoothness of the Haval Big Dog provides a comfortable experience. The previous issue of jerky starts has been eliminated, and the engine performs well at low RPMs, with timely power delivery after starting. Below are the pros and cons of the Haval Big Dog: 1. Pros of the Haval Big Dog: The retro exterior design aligns with current trends, and the rugged style appeals to young consumers. Built on the new Lemon platform, it supports gasoline, plug-in hybrid, and pure electric powertrains. Excellent NVH engineering, with a significantly improved chassis tuning compared to before. 2. Cons of the Haval Big Dog: The 1.5T small-displacement engine still struggles at medium to high speeds. The transmission prioritizes smoothness over shift speed. High tire noise, high fuel consumption, and lack of lumbar support.
14
0
Share

How to Check Vehicle Toll Information?

Vehicle entry and exit information on highways can be queried through the highway toll system. When a vehicle enters a highway, the ETC (Electronic Toll Collection) card or the IC card issued by the toll station records relevant information such as the time, location, and vehicle type. Similarly, when the vehicle exits the highway, the ETC card reading system or IC card toll system records the relevant information about the vehicle leaving the highway. Below is additional information: 1. Toll rates: Highway toll rates vary. A four-lane highway charges 0.4 yuan per kilometer, while a six-lane or wider highway charges 0.6 yuan per kilometer. 2. Toll factors: Toll rates are generally determined based on a comprehensive consideration of the following aspects: the total project investment and its composition; professional forecasts of short-, medium-, and long-term traffic flow for the highway; and the proposed approved toll collection period.
4
1
Share

What is the difference between reference price and manufacturer's suggested retail price?

Automobile reference prices are lower than the manufacturer's suggested retail prices, which are set by the manufacturer. It is more appropriate to purchase a car based on the reference price, as the actual transaction price is usually close to the reference price. Specific details are as follows: 1. Manufacturer's Suggested Retail Price (MSRP): The MSRP is the price set by the manufacturer, and in principle, 4S stores are required to sell at this price, which includes the manufacturer's profit beyond the cost. 2. Reference Price: The reference price is a suggested purchase price provided by automotive websites after compiling quotes from various dealers. The websites imply that selling at this price is reasonable. In actual car purchases, you need to negotiate the price with the dealer, and the final ex-factory price may be lower than the reference price. Some popular models may even be sold above the MSRP. Most prices, however, are below the MSRP.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.