What causes the triangle exclamation warning light in the Tiguan L?

2 Answers
IsabellaFitz
07/29/25 4:00am
The triangle exclamation mark on the Tiguan L's dashboard is a general fault indicator light. The most common cause is poor contact in external lights. If it's a yellow triangle with an exclamation mark in the center, possible causes include: overheating of the dry dual-clutch transmission clutch, intervention or malfunction of the fuel cutoff system, parking sensor failure, or engine oil pressure sensor malfunction. Below are introductions to other indicator lights with exclamation marks: Tire pressure indicator: When the ignition is turned on, the light will illuminate for a functional test and automatically turn off after a few seconds. If it stays on or flashes, it indicates abnormal tire pressure in one or more tires. Steering system fault indicator: When this light comes on, it may indicate that the electric/mechanical steering mechanism is not working or there's a fault in the steering column lock. Driving should not continue in this case. Brake system fault light: When this light illuminates, it likely indicates a brake system malfunction or low brake fluid level. Drive at low speed, prepare for early braking, and apply greater pedal force. Transmission fault indicator: Visible in vehicles equipped with multitronic transmission. When this light comes on, it indicates an abnormal condition or fault in the transmission.
Was this review help?
6
0
Share
OmarRose
08/12/25 7:45am
I've been driving a Volkswagen Tiguan L for ten years and have encountered situations where the triangle exclamation mark warning light comes on. There are generally several common reasons for this. The most common one is low tire pressure. The car is equipped with a tire pressure monitoring system, and if the tire pressure is insufficient, it will flash the light as a reminder. Problems with the braking system can also trigger it, such as severely worn brake pads or low brake fluid levels, which will cause the light to come on. Additionally, issues with the power steering or engine sensors, or electronic component malfunctions, can be the culprit. The Tiguan L owner's manual states that if the light comes on, you should immediately pull over to check and not continue driving. Safety comes first—check if any other warning lights are illuminated on the dashboard or use a tire pressure gauge connected to the cigarette lighter to measure the tire pressure. If the tire pressure is normal, you should promptly visit a 4S store to scan for trouble codes; professional technicians can identify the root cause. During regular maintenance, pay extra attention to tire pressure and the braking system to prevent issues in advance.
Was this review help?
19
5
Share
Expand All
More Forum Discussions

Under what circumstances should the Sylphy Classic ECO be turned on?

The Sylphy Classic ECO should be turned on mainly in congested urban traffic conditions. In such scenarios, strong power is not required, and the frequent stop-and-go driving leads to higher fuel consumption. Activating the ECO mode in these conditions not only helps reduce fuel consumption but also makes driving more comfortable. Types of ECO modes: Generally, ECO driving modes can be divided into two types: passive ECO driving mode and active ECO driving mode. The passive ECO driving mode primarily serves a reminder and guidance function. The active ECO driving mode usually has a dedicated button; once activated, it alters a series of driving-related settings. For example, the throttle opening corresponding to the same accelerator pedal depth becomes smaller (making the accelerator less responsive), the transmission shift logic prioritizes fuel economy (shifting up earlier), and some vehicles may also adjust the air conditioning output power accordingly. Scenarios where it's unnecessary to turn on ECO: When driving at high speeds (up to 100km/h), even if ECO is turned on, the vehicle's computer will prioritize speed, causing the ECO mode to automatically deactivate. Similarly, when high torque output is needed, such as when climbing a hill, the engine computer will prioritize ensuring and delivering sufficient power to drive the vehicle, and the ECO mode will automatically deactivate.
3
2
Share

What does 'map' mean on a car?

"map" refers to the GPS navigation function, with specific explanations as follows: Car GPS navigation is a vehicle tracking system that uses satellite positioning to navigate the vehicle, solving the problem of drivers getting lost due to unfamiliar road conditions. Functionally, car GPS navigation includes positioning, anti-theft, emergency rescue, in-car phone calling, and dispatch management features. 1. Positioning function: Car GPS navigation can determine the vehicle's location via satellite positioning, allowing drivers to find their way in unfamiliar environments. It can also help locate a lost vehicle. 2. Anti-theft function: When a vehicle is illegally moved, the car GPS navigation will automatically alert and send the vehicle's location to the owner and relevant authorities, serving as an anti-theft measure. 3. Emergency rescue function: In cases of vehicle theft or accidents, the emergency rescue feature of car GPS navigation can be activated to alert authorities, providing convenience. 4. In-car phone function: The car GPS navigation system can be used to make phone calls. 5. Dispatch management function: GPS manual services can be utilized to achieve dispatch management functions.
3
0
Share

What Brand is Kaiyi Auto?

Kaiyi Auto is a new automotive brand under Chery Holding Group, established in March 2014. Here is relevant information: 1. Kaiyi Auto, formerly known as Wuhu Kaiyi Automobile Co., Ltd., was officially established in 2014. It was jointly invested by Anhui Jiangbei Development Co., Ltd., Chery Commercial Vehicle (Anhui) Co., Ltd., and Wuhu Construction Investment Co., Ltd. 2. Kaiyi Auto Company itself does not engage in vehicle production; its products are manufactured by Chery factories on its behalf, with Kaiyi solely responsible for research and development as well as sales. Most of Kaiyi Auto's models are produced at the Jiangbei Base in Wuhu, Anhui. On December 15, 2017, Wuhu Kaiyi Automobile Co., Ltd. was officially renamed Yibin Kaiyi Automobile Co., Ltd.
17
2
Share

How to Cancel the Tire Pressure Warning on Volkswagen Tiguan?

To reset the tire pressure warning on the Volkswagen Tiguan, follow these steps: 1. Press the left and right function buttons to access the settings menu. 2. Select the tire pressure option and perform the tire pressure detection reset. Below is some related information about the Volkswagen Tiguan: 1. Taking the 2017 Volkswagen Tiguan as an example, it is a compact SUV with body dimensions of 4506mm in length, 1809mm in width, 1685mm in height, and a wheelbase of 2684mm. 2. The 2017 Volkswagen Tiguan is equipped with a 1.8T turbocharged engine, delivering a maximum horsepower of 160PS, a maximum torque of 250Nm, and a maximum power of 118kW, paired with a 6-speed automatic transmission.
13
3
Share

How to reset the maintenance reminder for Fiat Viaggio?

The solution to reset the maintenance light for Fiat Viaggio is as follows: 1. Turn the ignition switch OFF, press and hold the button on the left side of the instrument panel. 2. Turn the ignition switch ON until the maintenance display is completed, then turn the ignition switch OFF. Below is additional information about maintenance reset: 1. Modern vehicles' onboard computers have maintenance mileage reminders. If maintenance is not performed when the mileage is reached, the maintenance light will illuminate. After maintenance is done, the service station will reset the maintenance light to start recording the driving mileage until the next maintenance interval. If you perform maintenance yourself instead of going to a service station, you can also reset the maintenance light by following the instructions in the manual. If not reset, the maintenance mileage cannot be recorded. 2. The purpose of these lights is to record the usage mileage of important components, similar to a timer in a sprint race, serving as a reminder for both the car owner and maintenance personnel. 3. If the owner replaces related parts but does not reset the maintenance light, it will not affect the vehicle's performance, but it may cause inconvenience for future part replacements: it will be difficult to accurately know the usage time of the new parts. After each maintenance, the previous records need to be cleared and reset to start a new calculation.
13
4
Share

What are the differences between the Toyota C-HR and the Buick Encore?

The differences between the Toyota C-HR and the Buick Encore are as follows: 1. Different exterior designs. 2. Different body dimensions. 3. Different powertrains used. The Toyota C-HR is equipped with a 2.0-liter naturally aspirated engine across all models. The Buick Encore offers two engine options: a 1.0-liter turbocharged engine and a 1.3-liter turbocharged engine. Below is additional information about the Toyota C-HR and the Buick Encore: 1. Advantages of the C-HR: Easy to drive and high aesthetic appeal. Its design is considered one of Toyota's best in recent years, appealing to those who prioritize style. In terms of performance: Its 2.0L engine offers strong power, low fuel consumption, and a light and agile driving experience. Disadvantages: The rear seat space is relatively small due to design compromises, making it less practical. It is suitable for scenarios where the car is mostly used by 1-2 people. 2. Advantages of the Encore: Stable performance, mature technology, and a sophisticated appearance. Disadvantages: Higher price and limited space.
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.