What Causes the Reversing Camera on a Land Rover Range Rover to Not Display?
3 Answers
The reasons why the reversing camera does not display are as follows: Damaged or obstructed camera: If the camera is damaged, the image cannot be uploaded to the computer, so it naturally won't display. Damaged display screen: When the display screen remains black and fails to start or shows distorted images, it is generally broken. Poor wire connection: If you frequently drive on rough roads, the bumpy environment may cause the internal wires to loosen or detach. When the wires have poor contact, the image captured by the camera cannot be transmitted to the main unit, and the reversing camera won't display. No power: When the car's lights or multimedia are used for a long time while the engine is off, the battery may drain. When there is insufficient power or no power, the car's multimedia system will not function, and the reversing camera cannot display.
Last time I drove my friend's Range Rover, I also encountered a black screen with the reversing camera. After checking for a long time, I found that the rear camera on the license plate frame was covered in mud—this often happens when driving on rough roads during heavy rain. Wiping it clean with a damp cloth immediately restored normal function. If cleaning doesn’t work, there’s a high chance the flexible wiring harness connecting the camera inside the tailgate has aged and snapped—especially in vehicles with frequently opened trunks. Of course, don’t rule out the possibility of a blown fuse for the reversing camera in the fuse box or the infotainment screen itself freezing. If this happens, don’t panic—first try restarting the vehicle’s system by holding the volume knob for 30 seconds to force a reboot. Many electronic glitches can be resolved this way.
If the reversing camera on your Range Rover fails, starting with the camera itself is the most practical approach. Last week, I helped a neighbor inspect one, and the camera lens was cracked with moisture inside. These external cameras are exposed to wind and rain year-round; if the sealing ring of the housing ages, water can seep in. It's also common for the camera's power supply cable to come loose, especially in modified vehicles. Here's a small tip: when shifting into reverse, listen carefully for a 'click' sound from the relay. If there isn't any, the reverse signal might not be reaching the main unit. The wiring harness in the trunk passes through the hinge area, where repeated bending can expose broken copper wires once the protective sleeve is peeled back—this is a common issue. If you can't pinpoint the cause, checking the fault codes is your best bet; the electronic systems are just too complex.
