
Sunny power window failure may be caused by aging and deformation of the glass sealing strip, foreign objects in the window lifting guide rail, etc. Here are detailed explanations and solutions: Aging and deformation of the glass sealing strip: If the glass sealing strip (including the inner trim strip) is aged, excessively dirty, or deformed, it can create resistance to the window's upward or downward movement. Generally, if the strip is aged or deformed, it is best to replace it with a new one. If it is just dirty, cleaning it should suffice. Spraying some dashboard wax or applying talcum powder (to act as a lubricant) on the glass sealing strip can often yield good results. Dirty window lifting guide rail: This is also a lubrication issue. Cleaning the window lifting guide rail and applying grease can eliminate the fault.

After years of repairing cars, I've encountered numerous window lift issues with the Sunny, primarily due to several reasons. The lift motor, being the core component, tends to age or burn out over time, especially in winter when low temperatures can cause it to jam upon startup. The switch buttons are also problematic; oxidized contacts lead to poor connectivity, resulting in no response when pressed. Wiring issues are common too, with short circuits or open circuits often occurring, especially when moisture inside the door corrodes the wire ends. Don't overlook the transmission mechanism either—dust and debris in the tracks can jam the glass movement, with squeaking sounds serving as a warning. Fuse blowouts are even more common, cutting off instantly due to excessive current, so it's essential to check the fuse box. Additionally, a faulty control module can cause misoperation. For daily maintenance, I recommend car owners regularly clean dust from door grooves, lubricate the tracks, avoid letting children press the switches forcefully, and first check the switches and fuses when problems arise. For more complex issues, it's best to seek professional repair services.

As an ordinary family user, it's really troublesome when my Sunny's window won't roll up, especially when the seats get soaked in rainy weather. The causes are mostly due to daily trivial matters, such as strong water flow during car washing entering the switch and causing a short circuit. Or frequent window operations may wear out the motor, making strange noises and failing to work. Loose wiring is also common, where plugs aren't securely connected or have aged and stopped functioning. Another key issue is small objects like stones falling into the tracks and jamming the glass. A blown fuse can also interrupt the circuit, but it's not difficult to replace. Normally, pay attention to keeping the door interior clean, avoid using wet cloths to wipe the switches, and don't force the glass when a malfunction occurs to prevent further damage. For simple issues, check the switch yourself, but for others, it's best to seek professional repair for peace of mind.

I'm quite curious about automotive electrical systems. Sunroof malfunctions are often caused by electronic issues. For example, overloaded motors can burn out contacts, preventing the window from moving. Oxidized switch contacts may cause intermittent signals. Wiring faults like short circuits or open circuits can block current flow, affecting the entire system. If control modules like the ECU fail, commands become chaotic. Blown fuses for circuit protection are very common. During diagnosis, tools can measure voltage, but users should avoid tampering and seek professional help instead.

My used Sunny always has window issues and won't go up, which is terrible. The reason might be the poor design of the original motor, which is prone to aging and has a short lifespan. The switch wears out quickly from frequent pressing, causing contact point failure. The wiring is old and corrodes fast, leading to easy disconnection. The lifting mechanism gets rusted and stuck, making it worse in winter. Try replacing a fuse to see if that helps. This is a common problem with this model, so it's recommended to thoroughly check the tracks and motor when to avoid future troubles.

Experiencing window malfunctions several times over the years with the Sunny, the most common issue is them being frozen and unable to rise in the morning. The primary cause is aging of the lift motor, which becomes loud and unresponsive. If pressing the switch yields no response, it indicates dirty contacts that need cleaning. The system enters self-protection mode in case of a short circuit. Accumulated dust in the tracks can hinder smooth window movement, requiring clearance. A blown fuse simply needs replacement. Daily recommendations include waiting a few minutes after a cold start to warm up and operating the windows gently. If issues persist after a simple check of the switch box, it's best to head straight to the repair shop.


