···
Log in / Register

What Causes the Noise in Volkswagen Bora's Shock Absorbers?

6Answers
AdamAnn
08/30/2025, 10:02:07 PM

Volkswagen Bora's shock absorber noise is caused by the following reasons: Damaged shock absorber: When the vehicle's shock absorber is damaged, due to the misalignment between its components, it will produce a squeaking noise when working on bumpy roads. Damaged shock absorber spring: The top rubber of the car's front shock absorber is made of rubber material, and its main function is to assist the shock absorber and spring in providing certain damping and buffering effects. When the shock absorber top rubber is damaged due to excessive wear, besides producing noise during operation, even when the shock absorber is not working, turning the steering wheel while stationary can also cause noise.

Was this review help?
114
Share
StSteven
09/12/2025, 01:37:05 AM

When driving a Volkswagen Bora, I feel that the abnormal noise from the shock absorbers is mostly caused by wear and tear of the suspension components. The most common reasons are internal leakage or valve failure of the shock absorber itself. Oil leakage reduces the damping function, resulting in constant squeaking when driving over bumpy roads. Additionally, if the springs are too loose or have aged and lost their elasticity, they can produce metallic clunking sounds during turns or when carrying heavy loads. If the bushings at the suspension joints are dry and cracked, the aging rubber increases friction between the joints, which is especially noticeable when driving slowly over speed bumps. Loose bolts are also a minor issue, as components can rattle during driving. This issue should never be ignored—driving at high speeds can worsen steering wheel vibrations, increase braking distance, and raise the risk of losing control. I recommend visiting a professional repair shop early to diagnose the issue with specialized equipment. Don’t wait until the problem worsens, as replacing the entire suspension system later will be more expensive. It’s also a good habit to check the suspension condition regularly, such as during car washes.

Was this review help?
14
Share
Expand All
McDakota
10/26/2025, 02:25:30 AM

If my Volkswagen Bora's shock absorbers start making strange noises, it's mostly due to daily driving. Especially after frequent driving on rough mountain roads, the excessive load on the shock absorbers can cause the internal oil seals to break, leading to squeaking sounds. Deformed springs or insufficient support is another common cause—overloading or hitting potholes too hard can accelerate metal fatigue. When bushings age and lack lubrication, the clunking noise during steering becomes particularly annoying. Additionally, installation deviations, such as excessive screw gaps, can amplify vibrations and noise on bumpy roads. I usually pay attention to whether the car body sways abnormally and lightly press the brakes to locate the source of the noise. If frequent strange noises are detected, avoid long-distance driving to prevent complete suspension failure. Head to a 4S shop for a free initial inspection—spending a little on replacement parts is better than a major repair.

Was this review help?
10
Share
Expand All
OIsabella
12/09/2025, 01:45:15 AM

Abnormal noises in the shock absorbers while driving a Bora usually stem from component aging. Leaking internal shock fluid reduces cushioning, causing squeaking when going over bumps; loose or broken suspension springs produce noticeable clanking during sharp turns; and loose mounting bolts increase metal friction sounds during jolts. These issues not only compromise driving comfort but also pose safety risks, as unstable handling at high speeds may lead to skidding. I emphasize the necessity of prompt repairs to prevent further deterioration of the faults.

Was this review help?
2
Share
Expand All
MacHaven
01/29/2026, 02:56:22 AM

When dealing with the abnormal noise issue of Volkswagen Bora's shock absorbers, my first step is to check whether the suspension bushings are dry, cracked, or lacking lubrication. Rubber aging causes the loudest squeaking sounds during low-speed driving. Additionally, oil leakage from the shock absorbers or spring deformation and overload can also trigger abnormal noises, especially after loading cargo. It is recommended to regularly inspect for oil stains and unusual sounds in the suspension during car washes and perform maintenance every six months. Prevention is better than cure, so avoid speeding over potholes.

Was this review help?
15
Share
Expand All
ArielFitz
04/24/2026, 02:21:35 PM

The abnormal noise from the Bora's shock absorbers is particularly noticeable during seasonal changes, mostly caused by hardened bushings or oil leakage in the shock absorbers. After spring rains, the high humidity causes rubber to contract, increasing squeaking sounds; loose bolts may also exacerbate noise during temperature fluctuations. Through several experiences, I found that the noise doesn't affect starting but can cause sluggish handling—always check the suspension before long trips. A simple self-check method is to shake the car body and listen for sounds; if frequent, visit a professional shop for repair.

Was this review help?
16
Share
Expand All
More Q&A

How is the toll charged if entering the highway before National Day?

For small passenger vehicles, the toll on the highway before National Day is determined by the time of exiting the toll station. Exiting after midnight on National Day is free; exiting before midnight on National Day will not be free. Highway: Highway, abbreviated as expressway, refers to a road specifically designed for high-speed travel by automobiles. The definition of a highway varies by country, region, era, and academic field. Function: Highways are multi-lane roads exclusively for automobiles, featuring directional and lane-specific travel, with full access control. The design speed of highways ranges from 80 to 120 kilometers per hour.
113
Share

Does driving through when the front wheels cross the line in the last second of the yellow light count as running a red light?

Driving through when the front wheels cross the line in the last second of the yellow light does not count as running a red light. According to China's traffic regulations, vehicles that have already crossed the stop line when the yellow light is flashing are allowed to proceed. However, it is generally advised not to force through at the last second, as this is a very dangerous behavior. In such a situation, the vehicle should be stopped immediately to wait for the next green light. If the vehicle has just crossed the line and the driver does not continue to move the vehicle, keeping it stationary, the traffic authorities will not consider it as running the light. There is a three-second transition time between the yellow light turning on and the red light turning on. Electronic police operate 24 hours a day, but they do not capture images when the yellow light is on; they start capturing images only when the red light turns on.
112
Share

How are the license plates ABCD EF arranged in Guizhou?

Here is the detailed introduction to Guizhou license plate numbers: 1. Gui A - Guiyang, Gui B - Liupanshui, Gui C - Zunyi, Gui D - Tongren, Gui E - Qianxinan Buyi and Miao Autonomous Prefecture, Gui F - Bijie. 2. Gui G - Anshun, Gui H - Qiandongnan Miao and Dong Autonomous Prefecture, Gui J - Qiannan Buyi and Miao Autonomous Prefecture. More details are as follows: 1. The vehicle registration authority code consists of 2 characters, including a Chinese character and an English letter. The Chinese character is the abbreviation of the province, autonomous region, or municipality directly under the central government, while the English letter represents the code of the vehicle management office. 2. For car license plates, the vehicle registration authority code is located in the center at the top of the plate, with the Chinese character and English letter arranged horizontally. For motorcycle license plates, the vehicle registration authority code is located on the left side of the plate, with the Chinese character and English letter arranged vertically.
119
Share

What does front mean?

On a car's air conditioning system, "front" refers to the function of defogging the front windshield. It is usually represented by a fan-shaped symbol with several upward wavy arrows and the word "FRONT" at the bottom. Similarly, "REAR" indicates the button for defogging the rear windshield. Here are some additional details: 1. While driving, when there is a significant temperature difference between the inside and outside of the car, fog may form on the windshield, which can severely obstruct the driver's view. In such cases, you can press either the "FRONT" or "REAR" button, depending on whether the fog is on the front or rear windshield, to remove the fog. 2. When driving, it's also important to pay attention to the use of the internal and external air circulation systems. If you're driving for an extended period, it's advisable not to keep the internal circulation on continuously, as this prevents fresh air from entering the car, which is not good for the occupants.
113
Share

What brand of car is AIRBAG?

AIRBAG is not a car brand, but a type of airbag. Generally, models equipped with steering wheel airbags will have the AIRBAG label. Areas marked with SRS or AIRBAG inside the car indicate where the airbags are folded and stored. More details are as follows: 1. The protection principle of airbags is: when a car experiences a certain level of collision force, the airbag system triggers a chemical reaction similar to a small dose of explosive detonation. 2. At this point, the hidden airbags inside the car inflate and deploy instantly, cushioning the impact between the occupants and the car's interior equipment before collision occurs, thereby reducing the force exerted on the body and minimizing occupant injuries.
115
Share

What does the parking brake pedal mean?

The parking brake pedal is the vehicle's parking brake. In Toyota vehicles, the parking brake is designed in the form of a pedal, located at the far left of the brake and accelerator pedals, replacing the manual parking brake on the center armrest. Related details are as follows: 1. The parking brake of a motor vehicle refers to the manually operated brake installed in the vehicle, which can be used to stabilize the vehicle after it comes to a stop, preventing the vehicle from rolling on slopes. 2. The parking brake of a motor vehicle is located below the driver's right hand for easy access. In some models, the parking brake is equivalent to an electronic parking brake system.
103
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.