What causes the engine yellow light to flash and then disappear?

How to Turn On the Rearview Mirror Heating in HR-V?

Here is how to use the rearview mirror heating function in Dongfeng Honda HR-V: 1. First, locate the rearview mirror heating switch on the inner handle of the driver's door panel in the Dongfeng Honda HR-V. (The rearview mirror heating rotary switch in the Dongfeng Honda HR-V has three positions: left, middle, and right, representing the left rearview mirror, rearview mirror heating, and right rearview mirror, respectively.) 2. Turn the rearview mirror heating knob in the Dongfeng Honda HR-V to the heating position. This way, as long as there is any substance (such as a layer of water) on the rearview mirror glass, the Dongfeng Honda HR-V rearview mirror will automatically heat up.

11

2

Share

What is the appropriate tire pressure for BMW X1?

BMW X1's normal tire pressure range is 2.4-2.5bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2bar in winter and decreased by 0.1bar in summer. This data is based on the international GBT2978-2008 standard requirements. BMW X1 is equipped with an active tire pressure monitoring function, and the dashboard displays the tire pressure information of all four wheels, allowing you to clearly know which specific tire has an issue. The specific method to check is: find the "Vehicle Status" option on the central control screen; press the "Tire Pressure Monitoring (RDC)" option in the menu to view the tire pressure values. Generally, a tire pressure exceeding 2.8bar is considered too high, and a tire pressure below 2.0bar is considered too low. Hazards of excessive tire pressure: Reduced tire friction and adhesion, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates localized wear of the tread center pattern, shortening tire lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; overextends the tire cords, reducing tire elasticity and increasing the load on the vehicle during driving. Hazards of insufficient tire pressure: Increases friction coefficient with the road surface, raising fuel consumption; causes heavy steering and deviation, posing safety risks; increases movement of tire parts, leading to abnormal heat due to excessive rolling; reduces cord and rubber functionality, causing delamination or cord breakage and excessive friction with the rim, damaging the bead area and causing abnormal wear; multiplies friction between the tire and the ground, sharply raising tire temperature, softening the tire, and drastically reducing its strength. High-speed driving may lead to tire blowouts. If the tire pressure monitoring indicator light turns on (a yellow symbol with an irregular circle, no stamp on top, four small spikes below, and an exclamation mark inside), there are generally three reasons: Abnormal tire pressure: Usually alarms when below 1.8bar or above 3.0bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the system still records the old data, causing the indicator light to turn on. Simply perform a tire pressure reset. Damaged tire pressure sensor: The tire pressure sensor, used to monitor tire pressure, is directly installed inside the tire and connected to the tire inflation port. If the sensor is damaged during driving, the tire pressure warning light will turn on. For sensor damage, only replacement with a new part is possible.

5

3

Share

How to Reset Honda Tire Pressure Warning Light?

Here are the steps to reset the Honda tire pressure warning light: 1. Press the arrow button at the lower right corner of the steering wheel until "Personal Settings" appears on the center display. 2. Press the SET/RESET button, and "Enter Tire Pressure Monitoring System Calibration" will appear on the center display. 3. Press the SET/RESET button again, and "Set Tire Pressure Monitoring System Calibration" will appear on the center display. 4. Press the arrow button at the lower right corner of the steering wheel, and "Calibration 2/2" will appear on the center display. 5. Press the SET/RESET button, and "Calibration Started" will appear on the center display. Wait a few seconds to complete the process.

3

0

Share

How to Open the Fuel Tank Cap of Bora?

Here is how to open the fuel tank cap of Bora: 1. The fuel tank cap is located at the right rear of the car. 2. Use the car key or the opening button on the driver's side door to unlock the car. 3. Press the front end of the fuel tank cap to open it. 4. Unscrew the fuel filler cap by turning it counterclockwise and hang it on the upper part of the fuel tank cap. The label inside the fuel tank cap lists the applicable fuel grade for the vehicle. Here is an extended introduction to the refueling process: 1. When refueling, if the automatic fuel nozzle is used correctly as specified, it will automatically shut off when the fuel tank is full. 2. Do not attempt to continue refueling after the fuel nozzle automatically shuts off. Otherwise, there will be no expansion space in the fuel tank, and fuel may overflow when the temperature rises.

16

3

Share

What is the reason why the right rear door of a Mercedes-Benz cannot be opened from the inside?

Mercedes-Benz right rear door cannot be opened from the inside because the child safety lock is engaged. There is a small switch on the door frame, just flip it to unlock. Below is an extended introduction to the car child lock: 1. The car child lock, also known as the door child safety lock, is set on the rear door lock of the car. After opening the rear door, there is a small lever (safety mechanism) below the door lock. Flip it towards the end with the child icon, then close the door. At this time, the door cannot be opened from the inside, but can only be opened from the outside. 2. Its function is to prevent active and unaware children from opening the door during driving when they are seated in the rear, thereby avoiding danger. In this case, the door can only be opened by an adult from the outside after parking. If the rear door of the car cannot be opened from the inside but can be opened from the outside, it is highly likely that the child lock is in effect. This is caused by the rear passengers triggering the safety mechanism when getting on or off the car, and it only needs to be reset.

13

5

Share

Should the Volkswagen Polo use 92 or 95 octane gasoline?

The Volkswagen Polo uses 92 octane gasoline. Additional information: 1. The difference between 95 and 92 octane gasoline lies in the isooctane value. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane, resulting in different anti-knock properties. Therefore, it is generally recommended to follow the manufacturer's suggested gasoline type. 2. In special circumstances where fuel is unavailable, mixing the two types of gasoline usually does not cause major issues, but prolonged use should be avoided as it can lead to knocking, power shortages, etc. Similarly, a car that normally uses 95 octane gasoline can occasionally use 92 octane without significant problems, but long-term use will increase the frequency of knocking and accelerate engine wear.

19

3

Share

What causes the engine yellow light to flash and then disappear?

How to Turn On the Rearview Mirror Heating in HR-V?

What is the appropriate tire pressure for BMW X1?

How to Reset Honda Tire Pressure Warning Light?

How to Open the Fuel Tank Cap of Bora?

What is the reason why the right rear door of a Mercedes-Benz cannot be opened from the inside?

Should the Volkswagen Polo use 92 or 95 octane gasoline?

What does ECON mean on a car?

What is the reason why the Volkswagen Sagitar doesn't move when in D gear but moves when accelerating?

What to Do When the Rear Wiper of Buick Envision Doesn't Spray Water?

How to open the trunk of Borgward BX5?