What Causes the Dashboard Warning Light to Illuminate in the 10th Generation Civic?

1 Answers
TannerFitz
07/28/25 7:07pm
The dashboard warning light in the 10th Generation Civic may illuminate due to: 1. Installation of aftermarket accessories; 2. Malfunction in critical components of the engine, transmission, or ABS system. Taking the 2021 Civic as an example, it belongs to the compact car category with body dimensions of 4517mm in length, 1799mm in width, 1434mm in height, and a wheelbase of 2700mm. It features a 47-liter fuel tank capacity and a curb weight of 1343kg. The 2021 Civic is equipped with a MacPherson strut front suspension and a multi-link rear suspension. It is powered by a 1.5L turbocharged engine delivering 177PS maximum horsepower, 130kW maximum power, and 220Nm maximum torque, paired with a continuously variable transmission (CVT).
Was this review help?
1
0
Share
More Forum Discussions

Does Insurance Transfer with a Used Car?

Compulsory traffic insurance transfers with the vehicle, but commercial insurance must be changed separately. According to insurance regulations, after the transfer of a used car, commercial insurance requires modification procedures for the original insurer to continue covering the insured vehicle. In other words, if commercial insurance is not updated after the transfer, the insurer may refuse claims in case of an accident. Here are key points to note for used car transfers: 1. Verify the legality of the vehicle registration certificate: Pay special attention to the embossed number, engine number, and registration date, ensuring no alterations. 2. Check for traffic violations: The vehicle must have no outstanding violations and valid compulsory insurance to proceed with the transfer. Vehicles with violations typically cannot be transferred until cleared. 3. For vehicles past inspection expiry: Submit proof of valid safety inspection and compulsory insurance. 4. Clarify insurance ownership: Commercial insurance can be canceled or transferred based on buyer-seller agreement.
16
1
Share

What brand of batteries does Tesla use?

Tesla's batteries are 18650 cells produced by Panasonic. After the official production of Model 3, the new 21700 battery will replace the 18650 as the new cell. More information about Tesla batteries is as follows: 1. Panasonic's NCR18650A battery: Tesla's earliest Roadster used Panasonic's NCR18650A battery, with a rated voltage of 3.6V and a capacity of 3.1Ah. The previous 85kWh battery pack used the NCR18650B battery, with a rated voltage of 3.6V and a capacity of 3.1Ah. 2. 21700 battery: It is a ternary lithium battery with a cathode material of lithium nickel cobalt aluminum oxide (NCA). This cylindrical ternary battery is currently the power battery solution with the highest energy density. Compared to prismatic batteries, although this type of battery has high energy density, its stability is poorer and requires excellent BMS (Battery Management System) support. Under current conditions, the energy density of the 21700 battery system produced is around 300Wh/kg, which is about 20% higher than the original 18650 battery system's 250Wh/kg. According to Panasonic's test data for power lithium battery cells, the volumetric energy density of its 21700 battery is much higher than that of the 18650 battery cell. The improvement in single-cell energy density far exceeds the 20% increase after grouping.
7
3
Share

Why Does Ducati Get So Hot?

Ducati motorcycles tend to get very hot due to their high power output and insufficient heat dissipation. Here are some specific details about Ducati: 1. Introduction: Ducati is an Italian motorcycle manufacturer founded by Antonio in 1926, headquartered in Bologna, Italy. Its products are renowned for their outstanding performance and distinctive Italian design. 2. Positioning: Ducati is a unique motorcycle brand. While everyday motorcycles serve as the best means of transportation and Harley-Davidson represents a certain lifestyle, Ducati stands as a high-performance toy driven by passion and dedication. Ducati does not manufacture motorcycles to meet market demands but rather out of sheer love for the craft.
1
4
Share

What are the penalties for driving improperly on the highway?

Below are the penalties and standards for traffic violations on highways: 1. Motor vehicles prohibited from entering the highway: Fine of 200 yuan, plus license suspension for 12 months and 12 demerit points. 2. Improper overtaking or lane changing: Fine of 200 yuan, plus license suspension for 12 months and 6 demerit points. 3. On the highway: Reversing, driving against traffic, or making U-turns/turns by crossing the central divider - Fine of 200 yuan, plus license suspension for 12 months and 12 demerit points. 4. After entering the guiding lane: Driving in the wrong direction - Fine of 30 yuan or single license suspension for 2 months. 5. Improper parking: Or failing to immediately move a malfunctioning vehicle causing serious traffic congestion - Fine of 200 yuan, plus license suspension for 5 months and 6 demerit points.
3
5
Share

Is the 4a15j1 engine Japanese technology?

4a15j1 engine is not Japanese technology. Below is a relevant introduction to the 4A15J1 engine: 1. The 4A15J1 engine is domestically produced: It is a 1.5L turbocharged engine independently developed and manufactured by GAC Trumpchi, designed to completely replace the previous generation 4A15M1 engine; 2. Performance: The 4A15J1 engine has a maximum horsepower of 169Ps, maximum power of 124Kw (maximum power speed 5000rpm), and maximum torque of 265Nm (maximum torque speed range 1700-4000rpm); 3. Advantages: Its greatest advantage lies in its ability to meet the China VI emission standards, making it one of the first domestically produced engines to comply with the China VI emission standards.
7
3
Share

Which engine does the Lynk & Co 03+ use?

The engine model of the Lynk & Co 03+ is B4204T23, with a maximum power of 187KW, a maximum torque of 350Nm, and a maximum horsepower of 254. The engine of the Lynk & Co 03+ was technically developed by the Volvo Car Group and is produced at the Volvo Car Group's Zhangjiakou engine plant. For daily maintenance of the Lynk & Co 03+ engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to mechanical load, with the selection standard not lower than the manufacturer's specified requirements. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, which can cause various problems for the engine. To avoid faults, change the oil regularly according to usage conditions and keep the oil level moderate. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and oil cannot pass through the filter element, the filter element may burst or the safety valve may open, allowing oil to bypass through the bypass valve and still carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from component wear to form sludge. A small amount remains suspended in the oil, while a large amount precipitates, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.