What Causes the Car Temperature Gauge to Alarm?

1 Answers
McJulian
07/25/25 3:41am
The reasons for the car temperature gauge alarm are: 1. Lack of antifreeze; 2. The thermostat fails to open normally or is stuck; 3. The water pump's pumping capacity deteriorates, causing poor water circulation; 4. The cooling fan does not work properly or rotates slowly after the water temperature rises. The solutions for the car temperature gauge alarm are: 1. Lack of antifreeze: Check for leaks, repair, and refill to the correct level; 2. Poor water circulation: If the thermostat fails to open normally or is stuck, replace the thermostat; 3. If the water pump's pumping capacity deteriorates, leading to poor water circulation and high temperature, the pump blades may be damaged, requiring replacement of the water pump; 4. If the cooling fan does not work properly after the water temperature rises, check the fuse, relay circuit, or inspect and replace the fan.
Was this review help?
18
4
Share
More Forum Discussions

How to Tightly Close the Hood of a Sylphy?

Sylphy's hood can be tightly closed by: lifting the hood to an angle roughly equivalent to placing a bottle of mineral water upright, then simply releasing your hand. The hood is made of rubber foam cotton and aluminum foil materials, which not only reduce engine noise but also isolate the heat generated during engine operation, effectively protecting the paint on the hood surface and preventing aging. The Sylphy is a compact car launched by Dongfeng Nissan, featuring a MacPherson independent front suspension and a torsion beam non-independent rear suspension. It is equipped with a 1.6L naturally aspirated engine, delivering maximum power outputs of 90kw and 99kw, paired with a CVT continuously variable transmission or a 5-speed manual transmission.
15
0
Share

How many days after car painting can the car be washed?

The time to wash the car after painting depends on the specific situation: 1. If painted in a paint booth, the car can be washed as soon as it is driven out; 2. If painted at a professional shop, the car can be washed when the staff hands it over to the owner; 3. If the car is painted and picked up on the same day, it is recommended to wait 2 days before washing; 4. At lower temperatures, it is recommended not to wash the car within a week. Precautions for washing the car include: 1. Avoid using alkaline substances like laundry detergent or dish soap; 2. Rinse the car promptly after rain or snow; 3. Avoid washing the car under direct sunlight; 4. Use a dedicated car wash cloth and wipe from top to bottom along the direction of water flow; 5. Wash the car after the engine has cooled down.
2
0
Share

What is the 0-100 km/h acceleration time of the Haval H5?

The 0-100 km/h acceleration time of the Haval H5 is 15.5 seconds. The 0-100 km/h acceleration refers to the time it takes for a vehicle to accelerate from 0 to 100 kilometers per hour, which is a direct reflection of the car's power. Taking the 2018 Haval H5 as an example, its body dimensions are: length 4645mm, width 1800mm, height 1785mm, with a wheelbase of 2700mm, minimum ground clearance of 225mm, and a fuel tank capacity of 70 liters. The 2018 Haval H5 is equipped with a 2.0T turbocharged engine, with a maximum power of 140kW and a maximum torque of 250Nm, paired with a 6-speed manual transmission.
1
2
Share

Methods for Repairing Plastic Dents on Cars

Methods for repairing plastic dents on cars are as follows: 1. Use hot water: Plastic softens when heated, and dented areas can be popped out by applying heat. Once the dent returns to its original shape, immediately cool the area that was exposed to hot water with prepared cold water to allow the rubber to contract and recover. 2. Use dent repair tools: Although bumpers are highly malleable, sometimes the force from hot water expansion alone is insufficient to lift and repair the dent. In such cases, external force is needed, and dent repair tools can meet this requirement, being very effective for small dents. 3. Apply manual pressure after relieving tension: Try removing one of the car's screws, reach inside the bumper with your hand, and apply pressure from behind. This can also help restore the bumper. However, dents in the bumper are often accompanied by scratches, in which case a visit to a repair shop for repainting may be necessary.
1
3
Share

What is the reason for the central control screen of the Mercedes-Benz C260L not lighting up?

It may be a black screen caused by a software failure in the central control audio-visual system or overheating during operation. Below is relevant information: 1. Mercedes-Benz: Mercedes-Benz is a world-renowned luxury car brand. In January 1886, Karl Benz invented the world's first three-wheeled car and obtained a patent, earning him the title of 'the inventor of the automobile.' 2. Central Control: The central control refers to the central control system. The central control system is a device that centrally manages and controls various equipment such as sound, light, and electricity. It is widely used in multimedia classrooms, multi-functional conference halls, command and control centers, and smart homes. Users can operate it using button control panels, computer displays, touch screens, and wireless remote controls.
12
1
Share

Where is the VIN number located on the Freelander 2?

The VIN number of the Freelander 2 is located under the front windshield on the driver's side. The VIN is a combination of letters and numbers. The Freelander 2 is a mid-size SUV under the Land Rover brand. Taking the Freelander 2 Si4 HSE Luxury Collector's Edition as an example, its body dimensions are: length 4500 mm, width 1910 mm, height 1740 mm, wheelbase 2660 mm, fuel tank capacity 70 liters, and curb weight 1880 kg. The Freelander 2 Si4 HSE Luxury Collector's Edition is equipped with a 2.0T turbocharged engine, with a maximum horsepower of 240, maximum power of 176.5 kW, maximum power speed of 5500 rpm, and is paired with a 6-speed automatic transmission.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.