
The correct steps for parking in Subject 2 are: 1. Observe the left and right rearview mirrors and the interior rearview mirror; 2. Turn your head to look at the right side of the vehicle and turn on the right turn signal; 3. Slow down and steer to the right; 4. Straighten the vehicle using the right-left-right method; 5. Park the vehicle and engage the handbrake; 6. Shift to neutral; 7. Release the clutch and turn off the engine to stop. Subject 2, also known as the small road test, is part of the motor vehicle driver's license and is the abbreviation for the field driving skill test subject. The test items for small cars C1 and C2 include five mandatory tests: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving on a curve.

Subject 2 parking mainly includes parallel parking and reverse parking into a garage. I still remember how to practice these. The instructor taught us to first prepare by adjusting the seat and rearview mirrors, fastening the seatbelt, pressing the clutch, shifting gears, and releasing the handbrake, then confirming the surroundings are safe. Drive slowly into the parking area, turn on the signal when you see the yellow line or marker, then control the speed to reverse. Generally, when you see the rear of the car align with the pole in the right rearview mirror, turn the steering wheel all the way to the right. Then observe the left rearview mirror—when the rear wheel crosses the line, straighten the wheel and slowly reverse in. During the process, constantly make minor adjustments to keep the car within the marked lines, avoiding both crossing the lines and exceeding the time limit. After parking, pull the handbrake, then signal when moving out. Practicing a few more times will ease the nerves. During the test, stay calm and don’t panic. If you reverse crookedly, you can make adjustments in place without randomly turning the steering wheel. Safety is the top priority—take it slow and you’ll pass for sure.

When teaching students, I always emphasize that the key to parking in Subject Two lies in standardized procedures and safety details. First is the preparation phase: check the vehicle's condition, adjust your position, and observe the surroundings. When entering the parking space, use a low gear and turn on the right turn signal to indicate your intention. During the reversing process, focus on reference points, such as the target point in the rearview mirror, and keep the steering wheel steady—don’t turn too abruptly. Once in the designated spot, brake quickly to avoid rolling or crossing the line. Develop good habits during practice, like confirming there are no pedestrians or obstacles behind before parking. Even if time is tight during the test, stay calm and focus on each step. Don’t forget to signal when leaving the parking space. This segment tests fundamental driving skills, making daily parking easier and reducing the risk of scratches or accidents. The key is consistent practice and reflection—familiarity leads to smooth execution.

When watching others learn to drive, I would remind them not to be careless when parking in Subject 2. Adjust the seat properly before driving to ensure comfort and visibility. Operate slowly when reversing to avoid hitting obstacles too quickly. Keep an eye on the rearview mirror and reference points, and use turn signals to alert others. Don't forget to engage the handbrake after stopping. Safety is the top priority, as every step affects both the passing rate and daily driving. More practice can reduce nervousness, which is very helpful for beginners.

The steps for parking in Subject 2 are very practical and can be applied to daily reverse parking or parallel parking. The steps are: first, prepare by adjusting the seat and mirrors, then fasten the seatbelt. Enter the parking area at low speed, turn on the signal light, and observe carefully. When reversing, steer according to reference points, such as turning when the car body reaches a certain point, and maintain a steady speed. After stopping, apply the brake and pull the handbrake. This set of operations can help you avoid losing points in the test and prevent parking accidents in real life, such as hitting the curb or scratching other cars. With more practice, these steps will become automatic, saving time and reducing stress.

When I was learning to drive, I practiced parking for the parallel parking test for a long time. Preparation involves adjusting the seat and mirrors properly and not forgetting the seatbelt. Enter the parking area slowly with the right turn signal on. When reversing, check the rearview mirror to find the right moment, like when the rear of the car aligns with the marker, then turn the steering wheel decisively without hesitation. Make minor adjustments when correcting, avoiding excessive movements. After parking, engage the handbrake and double-check before exiting. This technique is super effective for the test and also makes parking in real life a breeze—the key is to practice a lot and not fear mistakes.


