···
Log in / Register

What Causes the Buick Excelle's Air Conditioning to Alternate Between Hot and Cold?

3 Answers
StElena
07/29/25 2:11pm
The reasons for the Buick Excelle's air conditioning alternating between hot and cold are as follows: 1. Lack of Freon: It is necessary to check if there is a leak somewhere. The solution is to drip some water at the car's pipe joints; the leaking area will usually produce bubbles. Once the leak is found, it can be repaired, or you can go to a repair shop or maintenance shop to add Freon. 2. Dirty Filter: Locate the bypass valve on the filter base. When the pressure difference on both sides of the valve reaches a certain value, it can be opened. Generally, engine oil flows into the main oil pipeline through this pipe. Use automotive-specific lubricant to lubricate other related components. 3. Insufficient Antifreeze: You should immediately go to the nearest 4S store for repair. 4. Aging Air Conditioning Core: If the car's air conditioning core has been used for a long time, it may be faulty, and you should immediately go to the nearest 4S store for repair.
Was this review help?
17
0
Share
Leonard
08/13/25 6:14am
I've driven several Buick models, including the Excelle. If the air conditioning fluctuates between hot and cold, the most common cause is a leak in the refrigeration system, leading to insufficient refrigerant. This causes the compressor to work intermittently, disrupting temperature control. Additionally, the air conditioning thermostat might be malfunctioning, inaccurately sensing the cabin temperature and turning on and off sporadically. Compressor failure or unstable evaporator fan operation can also cause this, especially in compact cars like the Excelle. I recommend first checking the refrigerant pressure and compressor condition. If there's a leak, you'll need to recharge the refrigerant. A clogged cabin air filter affecting airflow should also be cleaned. Regular maintenance is crucial, otherwise driving in summer becomes unbearable, affecting both comfort and safety.
Was this review help?
17
4
Share
Expand All
LillianMarie
10/10/25 7:38am
I also encountered the issue of the air conditioning blowing hot and cold intermittently. My Excelle had this problem where the cold air suddenly turned hot while driving on the highway, which was really annoying. Later, I found out it was due to the aging of the evaporator temperature sensor, causing inaccurate data and the system switching modes randomly. There was also poor contact with the control buttons, making the AUTO button unstable. Check if the fuse is blown or if there are loose wires—the electrical system in the Excelle sometimes acts up. Adding refrigerant helped a lot, but for the long term, I recommend going to a professional shop for a comprehensive test of the AC module. Unstable AC not only wastes fuel but also distracts you while driving, increasing the risk of accidents.
Was this review help?
19
3
Share
Expand All
More Forum Discussions

What kind of car is the Mercedes-Benz Sprinter?

Mercedes-Benz Sprinter is a large MPV launched by Mercedes-Benz in 2003. The Sprinter features a grand and stylish exterior design. In terms of interior configuration, it is equipped with high-end amenities such as massage seats, in-car DVD players, flat-screen TVs, along with ABS, BAS, and ASR systems, significantly enhancing its safety rating. Below is more detailed information about the Mercedes-Benz Sprinter: 1. Dimensions: The Mercedes-Benz Sprinter measures 5910 mm in length, 1993 mm in width, and 2535 mm in height, making it a cost-effective 7-seater MPV. 2. Exterior: The Mercedes-Benz Sprinter maintains its distinctive characteristics, featuring a tall 2.6-meter-high body, a forward-protruding front end, a simple horizontal radiator grille with the prominent three-pointed star emblem in the center, and stylish streamlined integrated front headlights that are crystal clear. 3. Powertrain: The Mercedes-Benz Sprinter is powered by a 3.5-liter electronically controlled direct-injection gasoline V6 engine, delivering outstanding acceleration and traction performance. The Sprinter boasts a maximum power output of 180 kW, 258 horsepower, and a peak torque of 340 Nm, with a top speed of 161 km/h.
19
2
Share

Which city does the license plate starting with Lu C belong to?

License plates starting with Lu C belong to Zibo City, Shandong Province. A license plate is a number plate that identifies a vehicle, much like an ID card does for a person. License plate colors and classifications: License plates come in white, blue, yellow, and black. 1. White represents military or police plates. For example, GK12001 represents the Guangzhou Military District, and Zhe A1063 Police represents a vehicle from the Hangzhou Public Security Bureau. 2. Blue represents ordinary small vehicles. 3. Yellow represents ordinary large vehicles. 4. Black represents vehicles used by foreign investors in China or important figures.
17
5
Share

What are the methods for carbon deposit removal?

Methods for carbon deposit removal are as follows: 1. Throttle carbon deposits: Remove the throttle body, clean both sides with carburetor cleaner, then wipe off the decomposed carbon deposits with a cloth. 2. Engine internal carbon deposits: These mainly appear on intake/exhaust valves and piston tops in the combustion chamber. Use specialized equipment to inject cleaning agents into the combustion chamber, allow sufficient chemical reaction time, then extract the waste liquid. Note: For severe carbon buildup cases, disassembly cleaning is recommended - removing intake manifolds and engine cylinder heads for thorough engine cleaning.
13
3
Share

Has the Phaeton been discontinued?

The Phaeton was discontinued in 2016. Reasons for the discontinuation of the Phaeton: 1. Low production volume and poor sales. Due to high technical requirements, production was limited, and low sales led to massive losses. The profit per vehicle was negative at €28,100 (approximately ¥205,000 RMB), with a loss rate as high as 40%. Since its mass production in 2002, the Phaeton alone caused a cumulative loss of €2 billion (approximately ¥14.59 billion RMB) for the Volkswagen Group. 2. Poor sales and severe losses resulted in slow updates, with the model being sold for 13 years. Moreover, competitors like the Mercedes-Benz S-Class, BMW 7 Series, and Audi A8L had superior performance, making the Phaeton less competitive in its class. 3. Impacted by Volkswagen's 'Dieselgate' scandal and the resulting massive fines. 4. Ferdinand Piëch, former Chairman of the Volkswagen Group Supervisory Board, resigned from his position.
18
3
Share

What is the Scrap Life of Automotive Gas Cylinders?

For liquefied petroleum gas (LPG) cylinders with a designed service life of 8 years, an extension of the service period is permitted after a safety assessment, but only once, and the extension must not exceed one inspection cycle of the cylinder. For LPG cylinders without a specified designed service life, those that have been in use for 15 years should be scrapped and rendered unusable. Below are the relevant details: 1. Automotive LPG cylinders: Inspect every 5 years, with the first periodic inspection date calculated from the manufacturing date. 2. Automotive dimethyl ether (DME) cylinders: Inspect every 5 years, with the first periodic inspection date generally calculated from the installation supervision inspection date. 3. Automotive fiber-wrapped gas cylinders: Inspect every 3 years, with the first periodic inspection date generally calculated from the installation supervision inspection date. 4. Automotive compressed natural gas (CNG) cylinders: The first and second periodic inspections are conducted every 3 years, and after the second inspection, inspections are conducted every 2 years. For taxi cylinders, the first periodic inspection is conducted every 2 years, and the second inspection is valid for 1 year. The first periodic inspection date is generally calculated from the installation supervision inspection date. 5. Automotive welded insulated gas cylinders: Inspect every 3 years, with the first periodic inspection date generally calculated from the installation supervision inspection date.
13
4
Share

Where to Obtain the Environmental Label?

The steps to obtain the environmental label are as follows: 1. Vehicle owners can directly bring the original vehicle license and the original vehicle registration certificate to the nearest motor vehicle environmental inspection agency to apply for free. The specific procedure is: the applicant submits the required documents at the designated window, after which the issuing personnel will review and approve the application. The classification label will then be issued and printed by the issuing personnel, who will also fill out the issuance registration form. Finally, the applicant can collect the label and retrieve the original valid documents. 2. For in-use motor vehicles, the owner needs to drive the vehicle and bring the original vehicle license to the inspection station. The applicant must fill out the 'Motor Vehicle Environmental Classification Label Technical Identification Application and Review Form' (which can be downloaded and printed from the municipal environmental protection bureau's website), submit the aforementioned valid documents, and after the vehicle passes the technical identification review, the environmental classification label can be obtained.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.