What causes the automatic start-stop dashboard indicator light to illuminate in the Honda Vezel?

How to Identify Engine Oil Leaks?

Engine oil leaks can be identified from the following points: 1. Observe whether there is oil leakage around the engine periphery; 2. Notice if there is oil on the ground when the engine is stationary, and the engine fault indicator light will illuminate. Oil leakage refers to the escape of engine oil, which is caused by damage to engine cylinder gaskets, oil pan gaskets, sealing rings, or front and rear crankshaft oil seals, camshaft oil seals, or loosening of various fastening screws. The main hazards of engine oil leakage are the loss of oil, resulting in waste, and in severe cases, it can lead to insufficient oil and subsequent engine damage. Engine oil, also known as engine lubricant, plays roles in lubricating and reducing friction, assisting in cooling, sealing to prevent leaks, preventing rust and corrosion, and cushioning vibrations, and is hailed as the 'blood' of the car.

11

0

Share

What is the wading depth of the Prado 2700?

The maximum wading depth of the Prado 2700 is 700mm. Below is a detailed introduction to the Toyota Prado 2700: 1. Basic Introduction: The Toyota Prado 2700 is the latest model in the Toyota Land Cruiser series with a 2.7L engine. 2. Body Dimensions: The vehicle measures 4820*1885*1845mm in length, width, and height, with a wheelbase of 2790mm and a total weight of 2800kg. 3. Engine: It is equipped with a newly developed four-cylinder electronic fuel injection 1GR engine, with a displacement of 2694ml, maximum power of 120 (163 horsepower), maximum torque of 246 Nm, and is paired with a 4-speed automatic/5-speed manual transmission.

11

2

Share

Is the Iveco Easy to Drive?

According to feedback from numerous car owners, the Iveco offers a very good driving experience and is easy to operate, making it simple to get the hang of. Below is a relevant introduction to the Iveco: 1. Body dimensions: The vehicle measures 5990*2040*2780mm in length, width, and height. 2. Exterior: Built on a new China VI-compliant chassis, it features a three-horizontal-bar dot-matrix chrome grille, exuding sophistication and grandeur. 3. Powertrain: Equipped with a 3.0T diesel engine paired with an 8AT automatic transmission. 4. Other features: The electrical system includes a 400Ah lithium battery and a 3000W inverter. The water system is equipped with a 120L fresh water tank and a 45L grey water tank.

4

Share

What are the reasons why the Volkswagen Lavida automatic transmission cannot shift gears?

Possible reasons why the Volkswagen Lavida automatic transmission model cannot shift gears are as follows: 1. No fuel: The fuel gauge shows below the red line, naturally making it impossible to start and shift gears. 2. Dead battery: Due to reasons such as leaving headlights on for a long time or the battery reaching the end of its lifespan, resulting in a dead battery. It is generally recommended to replace the battery every 2 years. Additionally, installing xenon headlights, high-power audio systems, DVD players, etc., can also cause vehicle circuit failures. 3. Incorrect gear position: When starting an automatic transmission car, the gear must be in P (Park) or N (Neutral). If it is in R (Reverse) or D (Drive), the car will not start. 4. No antifreeze added: Some car owners add water or low-quality antifreeze, which can cause the entire cooling system to freeze in extremely cold winter conditions, leading to engine cracks, preventing the water pump from functioning, making it impossible to start, and damaging other engine components. 6. P-lock solenoid valve failure: For safety reasons, to prevent accidentally shifting into other gears when starting the vehicle, there is a P-lock solenoid valve. This solenoid valve requires a signal from the brake pedal to release. Therefore, these two components are interconnected, and if either one fails, the gear lever cannot be moved out of P to shift into other gears. 7. Gear lever assembly internal failure: Wear and tear of the internal gears in the gear lever can cause it to get stuck, making it difficult to move forward or backward, resulting in the inability to shift gears or difficulty in shifting. 8. Incomplete clutch disengagement: This may be caused by faults in the clutch disc or clutch pressure plate. Generally, the clutch three-piece set needs to be replaced, which includes the friction disc, pressure plate, and release bearing.

1

Share

What is the engine model of the Trumpchi Shadow Leopard?

The engine model used in the Trumpchi Shadow Leopard is 4A15J2, with a maximum horsepower of 177 hp, maximum power of 130 KW, maximum power speed of 5500 rpm, and maximum torque of 270 Nm. The Trumpchi Shadow Leopard's engine is from the GAC Trumpchi brand, a self-developed engine expansion, produced at the Yichang factory. For daily maintenance of the Trumpchi Shadow Leopard's engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional equipment of the intake and exhaust systems and usage conditions; for diesel engines, choose CB--CD grade diesel engine oil based on mechanical load, with the selection standard not lower than the manufacturer's requirements. Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, causing various problems for the engine. To avoid faults, change the oil regularly according to usage conditions and maintain an appropriate oil level. When oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is blocked and oil cannot pass through the filter element, it may burst the filter element or open the safety valve, allowing oil to bypass and carry contaminants back to the lubrication area, accelerating engine wear and increasing internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from component wear to form sludge. Small amounts remain suspended in the oil, while larger amounts precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.

4

0

Share

What is the reason for the Octavia water temperature gauge light?

Octavia water temperature gauge light is on because: there is a fault in the engine's cooling system, which prevents it from ensuring the cooling effect on the engine. This not only wears out the internal parts of the engine but can even lead to cylinder scuffing, resulting in very high repair costs. Therefore, when the water temperature gauge light comes on, it is essential to identify the cause. If the radiator leaks or the pipes crack, coolant leakage will occur. Even if coolant is replenished, the warning light will come on again after some time. The thermostat itself is a valve that controls the flow path of the coolant. If it malfunctions, it will definitely hinder the flow of the coolant.

10

4

Share

What causes the automatic start-stop dashboard indicator light to illuminate in the Honda Vezel?

How to Identify Engine Oil Leaks?

What is the wading depth of the Prado 2700?

Is the Iveco Easy to Drive?

What are the reasons why the Volkswagen Lavida automatic transmission cannot shift gears?

What is the engine model of the Trumpchi Shadow Leopard?

What is the reason for the Octavia water temperature gauge light?

What is the usage of S gear?

What Taxes Are Required When Buying an Imported Car?

Tutorial for Replacing the Battery in an Older Mercedes-Benz R350-4MATIC Key

What colors are available for the Chery Arrizo GX?