···
Log in / Register

What Causes the Abnormal Noises in Accord?

6Answers
LaSophie
07/23/2025, 08:21:20 AM

Different parts of the Accord may produce abnormal noises due to different reasons. It is necessary to identify the faulty part to determine the cause and carry out targeted repairs. Here are the specific introductions to different abnormal noises in cars: 1. Engine: A whirring sound indicates a bearing issue, while a squeaking sound suggests a problem with the starter or belt. 2. Transmission: A clicking sound indicates an issue with the transmission gears, a grinding sound points to a bearing problem, and a clattering noise signifies severe damage to the transmission. 3. Brakes: A metal scraping sound indicates that the brake pads need to be replaced. 4. Steering System: A clunking sound indicates a problem with the steering ball joint or rubber boot.

Was this review help?
110
Share
Amelia
08/10/2025, 06:18:24 AM

I have some knowledge about cars, and Accord rattles are quite common. It could be due to aging suspension components in the chassis, loose shock absorbers or ball joints, causing squeaking sounds when turning. If the wheel hub bearing is damaged, there will be loud noise at high speeds. Belt issues, such as a loose or worn timing belt or accessory belt, can cause squealing during startup. The interior should not be overlooked either—loose screws in the door panels or dashboard can result in rattling on bumpy roads. Internal engine problems, like a worn oil pump or pistons, may also cause unusual noises. Rusted exhaust system joints can produce a tapping sound. I suggest carefully identifying the source of the noise while driving and addressing minor issues promptly, such as tightening screws yourself. If that doesn’t help, visit a professional repair shop to prevent major repairs.

Was this review help?
12
Share
Expand All
Lacey
09/21/2025, 11:49:00 PM

My Accord started making strange noises after a few years of driving. At first, I thought it was a minor issue, but the sound gradually became louder. A friend suggested it might be a problem with the suspension system, possibly due to worn-out shock absorbers, causing loud noises when going over speed bumps. Alternatively, it could be a faulty wheel bearing, producing a humming sound when turning the steering wheel. Loose interior panels are also common, with noises coming from the air vents or storage compartments. A worn-out belt can cause squeaking, especially during acceleration. I didn't think it was a serious danger, but last week I took it to a repair shop for a quick check. It turned out to be just loose screws, which were fixed at a small cost. Now it's much quieter.

Was this review help?
18
Share
Expand All
LaCecilia
11/05/2025, 02:08:53 AM

Be cautious if you hear abnormal noises while driving an Accord, as it may indicate loose suspension components such as ball joints or control arms, with sounds becoming more noticeable during turns or braking. If the noise is severe, pull over immediately to avoid the risk of losing control. Check the bearings and belts, and don't force the car to continue driving. Safety comes first, so have a mechanic address the issue as soon as possible.

Was this review help?
3
Share
Expand All
VanAmara
12/26/2025, 03:56:44 AM

I've driven several generations of the Accord and have extensive experience with abnormal noises. The causes include worn suspension components, which produce a clunking sound when turning; damaged wheel hub bearings, which create loud noises; loose interior parts, leading to creaks from door gaps; and slack belts, which cause squealing. Checking screws and fasteners is crucial, as addressing minor issues early is key.

Was this review help?
12
Share
Expand All
StGage
03/23/2026, 11:30:23 PM

To prevent Accord from making abnormal noises, I regularly check key points. Ensure the belt tension is sufficient and listen for any bearing wear sounds; tighten chassis screws to prevent loosening; replace aging suspension and brake systems early. Test drive to locate noises by listening, and address minor issues promptly to avoid major repairs.

Was this review help?
19
Share
Expand All
More Q&A

Does the Airbag Warning Light Affect Driving?

The airbag warning light being on does not prevent the vehicle from being driven and does not have any other significant impact. Below is relevant information: Airbags: Electronic airbag systems are a passive safety (see vehicle safety performance) protection system. When used in conjunction with seat belts, they provide effective collision protection for occupants. In the event of a car collision, airbags can reduce head injuries by 25% and facial injuries by approximately 80%. Components: Mainly composed of airbag sensors, collision airbags, and electronic control devices. The driver-side collision airbag is installed in the steering wheel, while the passenger-side collision airbag is typically mounted on the dashboard. Airbag sensors are installed on the left, right, and center of the cabin partition; the central airbag sensor and the airbag system are integrated with the electronic control device. The airbag module primarily consists of the airbag, gas generator, and igniter. The electronic control device is used for data collection and processing, diagnosing the reliability of the airbag system, ensuring that ignition signals are promptly issued when preset thresholds are reached, and timing the ignition to guarantee sufficient driving current for the gas generator.
102
Share

What Causes Severe Shaking When a Car Starts?

Severe shaking when a car starts may be due to suspension system failure, unstable oil pressure, or cold start issues. The specific reasons are as follows: Suspension System Failure: The suspension system is primarily responsible for filtering vibrations from the engine during operation. If the suspension system malfunctions, these vibrations can directly transfer to the steering wheel and cabin, affecting driving. When the engine is idling, turning on electrical systems inside the car can also easily cause shaking. The engine increases load due to the activation of electrical systems, leading to a drop in idle speed. To compensate for the shaking caused by the idle speed drop, the engine automatically raises the RPM. Unstable Oil Pressure: If the engine carbon deposits have been cleaned, the throttle body washed, and the oil pads replaced, but the car still shakes, it is recommended to check the fuel supply pressure and intake pressure sensors at a repair shop. Abnormal fuel pump supply pressure or incorrect intake pressure sensor readings and improper operation can all cause the car to shake. Cold Start: The main reason for car shaking during a cold start is insufficient fuel combustion, resulting in inadequate power. Low ignition energy means that during startup, when the temperature of fuel and lubricants is low, more fuel is needed to meet power demands. Over time, the electrode gap of the spark plug gradually widens, leading to reduced ignition energy and poor fuel atomization, which causes the car to shake. Additionally, aging ignition coils, high-voltage wires of the spark plugs, or electrical leaks can also reduce ignition energy.
104
Share

How Many Days Does It Usually Take to Practice Reverse Parking?

Generally, learning reverse parking requires four sessions per day, and it takes about a week to master. Below is relevant information: Evaluation Criteria for Reverse Parking: Failing to follow the designated route or sequence results in disqualification; the vehicle body touching the line or failing to park properly results in disqualification; exceeding 210 seconds to complete reverse parking results in disqualification; stopping midway deducts 5 points each time. Tips for Reverse Parking: Control the driving speed by using first gear or reverse gear at idle speed throughout; maintain the same speed as when starting. Control the timing of steering; during reversing, observe carefully and master the key points for turning, steering at the right moment. Control the driving path; during the test, the vehicle's path mainly depends on the speed of steering wheel rotation and driving speed. When reversing, aim accurately at the boundary line and correct the direction promptly to ensure the vehicle enters the parking space straight.
101
Share

How many seconds after the green light turns directly to red will the camera capture?

The camera starts capturing two seconds after the green light turns directly to red. If a motor vehicle crosses the stop line under a green light and stops in the middle of the road when the light turns red, it will not be considered running a red light. Below is relevant information: Running a red light: Running a red light refers to the act of a motor vehicle violating the prohibition of passage during the red light phase at a signal-controlled intersection or road section, crossing the stop line and continuing to drive. According to the latest revised "Regulations on the Application and Use of Motor Vehicle Driving Licenses," running a red light results in 6 penalty points and a fine. Determination of running a red light: The determination of "running a red light" is based on passing the entire intersection, generally requiring three photos as evidence: the first when the wheels cross the stop line, the second when passing through the intersection, and the third after passing the intersection, all of which must occur during the red light. Only when these conditions are met will the electronic eye record it as running a red light.
120
Share

What is the difference between Zhengho HO and HX chains?

hx chains use better quality steel compared to ho chains. Here are the detailed differences: Service life: The lifespan of hx chains is significantly longer than that of ho chains and thickened chains of the same specifications. High-quality hx chains can achieve a service life of over 50,000 kilometers, while ho chains tend to loosen every few thousand kilometers and require tightening. Maintenance and durability: hx chains have longer maintenance intervals and better durability. Additionally, hx chains have higher torque resistance and tensile strength, making them wider and heavier than ho chains. Flexibility and price: ho chains have an advantage in terms of price and flexibility, and their maintenance process is relatively simpler.
119
Share

Is the Malibu a Class B car?

It belongs to the Class B car. Model Background: As a flagship mid-to-high-end car launched by Shanghai GM in China, the Malibu has become the focus of industry attention. The exterior design of the all-new Chevrolet Malibu draws inspiration from Chevrolet's legendary sports cars, the Corvette and Camaro, strongly reflecting a sporty style filled with American power. Model Design: The Malibu adopts Chevrolet's new family-style front face design, combining a U-shaped grille with a honeycomb front grille. The headlight design is somewhat similar to the current Buick Excelle GT style. The overall design gives a sense of grandeur and stability. The rear taillights feature an LED design.
115
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.