···
Log in / Register

What Causes the Abnormal Noise in Mercedes Shock Absorbers?

1Answers
RafaelDella
08/26/2025, 12:03:01 AM

Mercedes shock absorber noise is generally a normal phenomenon and not a malfunction. Due to the structure of the shock absorbers in Mercedes E-Class vehicles, the entire shock absorber is compressed when the vehicle passes over bumpy roads, thereby compressing the external spring. After the vehicle traverses the bumpy section, the spring's elasticity causes the shock absorber to reset. During this compression and resetting process, a "hissing" or "whooshing" sound of air release may accompany the movement. However, if the shock absorber noise is anything other than this, it is an abnormal phenomenon, such as oil leakage from the shock absorber. Mercedes shock absorbers bear the weight of the vehicle itself and passengers daily, while also mitigating road bumps. Hundreds of thousands of compressions can affect their lifespan, leading to damage, with the most common issue being oil leakage. After oil leakage, the internal oil pressure of the entire sleeve decreases, reducing the shock absorption effect and causing abnormal noises due to the leakage. Such noises are mostly the "clanging" sound of hard objects hitting each other or the "squeaking" sound of friction. The method to determine this is relatively simple: observe the vehicle's shock absorbers when the Mercedes has not been washed, checking for the presence of oil sludge or stains. If present, it can be concluded that the shock absorber is leaking oil. Minor seepage may not require much attention, but if the leakage is severe, timely replacement is necessary to reduce safety hazards. Moreover, faulty shock absorbers can only be replaced and cannot be repaired.

Was this review help?
101
Share
More Q&A

What are the pass rates for Subject 3 and Subject 2?

Subject 2 has a lower pass rate, while Subject 3 has a relatively higher pass rate. The main challenges in Subject 2 are as follows: 1. The key to passing Subject 2 lies in controlling the vehicle speed, which depends on the driver's mastery of the clutch. Excessive speed can easily lead to missing the optimal timing for steering adjustments and poor handling of the steering wheel. Therefore, learners must be proficient in using the clutch to control speed, maintaining a steady pace to avoid sudden stops caused by inconsistent speed. 2. Incorrect timing in observing reference points and steering. Exam nerves are inevitable, but excessive tension can result in forgetting the right moment to turn the steering wheel and unstable clutch control, leading to excessive speed. Test-takers need to adjust their mindset, treating the exam as they would a regular practice session at the driving school. 3. Running over the line mainly occurs during the reverse parking exercise, primarily due to inaccurate observation of reference points, leading to incorrect steering timing.
120
Share

What type of throttle pedal does the Cadillac XTS have?

The Cadillac XTS throttle pedal is a hanging type, commonly referred to as a 'hanging throttle' or 'suspended throttle'. Below is information about the types of throttle pedals and their descriptions: 1. Floor-mounted pedal: Since the pivot is located at the bottom of the pedal, the entire foot can press down on it, with the pedal itself acting as a fulcrum. This allows the calf and ankle to control the pedal more easily, improving pedal control precision and reducing fatigue. When paired with a manual transmission, the floor-mounted pedal also facilitates the execution of heel-and-toe techniques. 2. Hanging pedal: The 'normal throttle' is commonly referred to as a 'hanging throttle' (or 'suspended throttle').
111
Share

What are the safety precautions for using seat belts?

Here are the precautions for using seat belts: 1. The lap belt should be fastened snugly across the lower hips, making contact with the pelvic bones. 2. The shoulder belt should be positioned over the shoulder and across the chest. 3. To tighten the lap belt, pull downward on the buckle end while simultaneously pulling upward on the shoulder belt. 4. Fastening the seat belt incorrectly, positioning it improperly, or leaving it too loose. Here are the correct steps for using seat belts: 1. Take the latch plate and pull the seat belt across your body. 2. Insert the latch plate into the buckle until you hear a "click," then pull the belt to ensure it's securely fastened. 3. Pull upward on the shoulder belt to tighten the lap portion (the lap belt should be across the hips, not the abdomen). 4. Check the position of the seat belt and adjust the height adjuster to the appropriate position.
117
Share

What is the Difference Between the Grand Commander and Commander?

The Grand Commander and Commander have certain differences. The two vehicles are essentially identical in terms of exterior design, interior, configuration, powertrain, and even body dimensions. However, the fundamental distinction between them lies in the seating capacity—5 seats versus 7 seats. More details are as follows: 1. The Grand Commander model is divided into two variants based on seating capacity: the 5-seater version is called the Commander, while the 7-seater version is named the Grand Commander. 2. Both models share the same dimensions, with a length of 4873mm, width of 1892mm, height of 1738mm, and a wheelbase of 2800mm. 3. In terms of powertrain, the Grand Commander is equipped with a 2.0T turbocharged engine available in high and low power versions. The low-power variant delivers a maximum output of 234 horsepower and 350N·m of torque, while the high-power variant produces 260 horsepower and 400N·m of torque. The high-power version also comes with an on-demand four-wheel-drive system. The powertrain specifications are identical for both the Grand Commander and Commander.
108
Share

How to Reduce Noise in Cars?

Methods to reduce car noise are as follows: 1. Reduce road noise: Road noise is caused by the friction between tires and the road surface, generating vibrations and noise. Therefore, vibration damping is the best solution. Improvements can be made from three sources: vibration damping, sound absorption, and sound insulation. The method involves comprehensive application of damping plates or specialized damping boards, sound-absorbing pads, and door sealing strips on the wheel arches, floor, and doors. 2. Reduce wind noise: Wind noise mainly results from the friction between the car body and air during driving, transmitted into the cabin through door gaps. To address this, first remove the door inner panels, clean any dirt inside the doors, and install soundproofing materials, vibration damping, and sound-absorbing materials. Additionally, apply sealing materials around speakers and mounting plates. 3. Reduce engine noise: Engine noise is primarily transmitted into the cabin through vibrations from the hood and front fenders. Therefore, installing high-quality sound-absorbing foam materials on the engine hood can not only suppress vibrations caused by the hood but also absorb a significant amount of noise. 4. Reduce tire noise: Tire noise is usually generated by the friction and impact between the tire tread and the ground, transmitted into the car along with vibrations from the fenders and mudguards. Installing soundproofing materials on doors, fenders, and mudguards can effectively reduce noise.
109
Share

What does a triangle with an exclamation mark on the dashboard indicate?

It indicates that there is a fault in the car. A triangle with an exclamation mark in the middle is a general fault warning light. For safety reasons, it is recommended to have it inspected and repaired. The following situations may cause the light to illuminate: 1. Overheating of the dry dual-clutch transmission clutch. 2. Fuel cut-off system intervention or malfunction. 3. Parking sensor failure. 4. External light failure. 5. Engine oil pressure sensor failure. 6. Traction control system warning or malfunction. Other fault warnings include: 1. A circle with an exclamation mark in the middle and parentheses. This is the brake system warning light, which usually illuminates under the following conditions: some cars light up for a few seconds after turning on the ignition and turn off after starting the engine; it lights up when the handbrake is pulled up and turns off when released; low brake fluid level; brake system malfunction. 2. A horizontal line with an exclamation mark in the middle and parentheses below. This is the tire pressure monitoring warning light, which illuminates when the pressure in one of the vehicle's tires is too low.
110
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.