What Causes the Abnormal Noise and Resonance in Skoda Octavia?

2 Answers
LaBrantley
07/24/25 8:43am
Skoda Octavia may produce abnormal noises due to issues with the engine guard plate, tires, or steering. Resonance in Skoda is typically caused by ignition system failures or poor fuel quality. Causes of abnormal noises: Noise from the engine guard plate: This is often caused by minor impacts that deform the guard plate. Once deformed, the guard plate may come very close to or even touch the exhaust pipe. Since the exhaust pipe is suspended under the car, it can vibrate when accelerating or driving on bumpy roads, leading to collisions and friction with the guard plate, which produces abnormal noises. Tire noise while driving: When hearing abnormal noises, carefully listen to identify which wheel is making the noise. If unsure, inspect all wheels. Possible causes include large nails puncturing the tire or large stones stuck in the tread. Steering noise: A buzzing sound when turning the steering wheel to its limit is normal. This is the sound of the power steering pump releasing pressure under high load. Causes of resonance: Ignition system issues: Faults in the car's ignition system can lead to poor ignition performance, weak spark plug sparks, and unstable engine idling. The solution is to check the condition of the spark plugs, high-voltage wires, and ignition coils for excessive carbon buildup. If found, clean or replace the spark plugs immediately. Poor fuel quality: In China, many cases of unstable idling and vibrations are closely related to fuel quality. Low-quality fuel can impair engine performance, leading to idling vibrations. The solution is to promptly clean the throttle body, which can resolve most common issues.
Was this review help?
1
0
Share
Raquel
08/11/25 4:12am
I've been driving this Skoda Octavia for several years and have also experienced annoying body noises and resonance issues before. The most common causes could be aging suspension components, such as loose rubber parts in shock absorbers or control arms, which make 'clunking' sounds on bumpy roads. Additionally, unbalanced tires or irregular tread wear can cause wheel vibration resonance, especially noticeable at high speeds. In terms of the engine, a loose belt or worn-out mounts may create a humming sound from the engine bay, with vibrations transmitted to the driver's seat. Interior trim pieces like loose plastic fasteners on door panels or the dashboard may produce 'creaking' noises with slight touches. I've also encountered buzzing resonance caused by loose exhaust pipe mounting bolts. It's advisable to promptly visit a professional workshop to inspect each component with proper tools, avoiding safety risks. Only when the vehicle's condition is stable can you drive with peace of mind.
Was this review help?
5
3
Share
Expand All
More Forum Discussions

Where is the Citroën's Cabin Air Filter Located?

Citroën's cabin air filter is located inside the glove compartment on the passenger side. To replace the cabin air filter, it is necessary to remove the glove compartment. It is recommended to have the cabin air filter replaced at an automotive repair shop or a 4S dealership. The primary function of the cabin air filter is to filter out impurities from the air. During the use of the air conditioning system, it prevents external dust from entering the vehicle, thereby protecting the health of the occupants to a certain extent. Citroën is a French automobile manufacturer founded in 1919, with its headquarters located in Paris, France. In 1976, the Peugeot Group acquired 89.5% of Citroën's shares and established PSA Peugeot Citroën, merging Citroën with Peugeot. In 1991, Citroën formed a joint venture with China's Dongfeng Motor Corporation, known as Dongfeng Peugeot-Citroën Automobile (DPCA), primarily producing passenger cars and light commercial vehicles.
15
4
Share

Does the 2021 Vios come with navigation?

Yes. Below is an introduction to the Toyota Vios: 1. Exterior Design: The exterior is simple, stylish, and highly fashionable. Through optimization of length, height, and wheelbase, the vehicle's dimensions are enlarged, giving it a more premium appearance compared to other models in its class. This not only enhances its stylish appeal but also effectively improves the comfort of the cabin space. 2. Powertrain: Equipped with a 1.6L Dual VVT-i engine, it achieves an excellent balance of powerful performance, outstanding fuel efficiency, and low emissions, delivering high-level driving performance within its class. 3. Features: Additional interior and exterior enhancements include a driver's side roof handle, chrome-plated handbrake button, body-colored side moldings, and side mirrors with turn signals. These upgrades enrich both the exterior and interior styling.
12
3
Share

What are the differences between the Exeed TX and Exeed LX?

The differences between the Exeed TX and Exeed LX: 1. Different vehicle positioning: The Exeed TX is positioned as a mid-size SUV; the Exeed LX is positioned as a compact SUV. 2. Different drive modes: The Exeed TX offers two drive modes, one is front-wheel drive and the other is on-demand four-wheel drive; the Exeed LX only has front-wheel drive. 3. Different body dimensions: The Exeed TX measures 4690mm in length, 1885mm in width, and 1706mm in height, with a wheelbase of 2715mm; the Exeed LX measures 4533mm in length, 1848mm in width, and 1699mm in height, with a wheelbase of 2670mm.
20
2
Share

What hatchback models does Citroën have?

Citroën currently has only one hatchback model, the C4 C-Quatre. However, as of November 2019, the hatchback version of the C-Quatre has been completely discontinued, and only the sedan version remains available in the market. The dimensions of the Citroën C4 C-Quatre are 4588mm in length, 1800mm in width, and 1496mm in height. The C4 C-Quatre is equipped with two engine options: a 1.6-liter naturally aspirated engine and a 1.2-liter turbocharged engine. The 1.6-liter version delivers a maximum horsepower of 117ps, a maximum power of 86kw, and a maximum torque of 150nm. The 1.2-liter version produces a maximum horsepower of 136ps, a maximum power of 100kw, and a maximum torque of 230nm.
19
0
Share

What engine is used in the Citroën C2?

The Citroën C2 is equipped with two types of engines: a 1.4-liter naturally aspirated engine and a 1.6-liter naturally aspirated engine. The 1.4-liter naturally aspirated engine has a maximum power of 56 kW and a maximum torque of 120 Nm, while the 1.6-liter naturally aspirated engine delivers a maximum power of 78 kW and a maximum torque of 142 Nm. The Citroën C2 is a compact car from Dongfeng Citroën, featuring a standard configuration that includes a highly responsive new-generation SUPER ABS system, automatic hazard warning light activation, an HLE high-strength MODULE body structure, leather seats, front airbags, retractable headrests for the rear seats as standard, central locking, electric front windows, height-adjustable steering column, hydraulic power steering, and a CD RD8 audio system with four speakers among other comfort features.
2
2
Share

How many years can the CVT transmission of Emgrand generally last?

The CVT transmission of Emgrand can generally last for about 200,000 to 300,000 kilometers or 15 to 20 years if properly maintained. The lifespan of the transmission largely depends on the durability of the steel belt. A standard pressure steel belt can last up to 30 years or more. Advantages of Emgrand's CVT transmission: The CVT transmission achieves optimal matching between the vehicle's external driving conditions and engine load through continuous variation of the transmission ratio, keeping the engine operating within the most efficient range. This improves the vehicle's power performance and fuel economy while reducing emissions. Since the CVT transmission's ratio changes continuously, the acceleration and deceleration processes are very smooth, without any gear-shifting impact, enhancing driving comfort. Maintenance methods for the transmission: Regularly inspect the transmission: Check the fluid level in the transmission to ensure it remains within the specified range and top it up as needed based on actual working conditions. When topping up, ensure the new fluid is of the same type. When replacing the fluid, drain the old fluid while the transmission is operating and clean it thoroughly. Periodically inspect the working condition of the transmission gears to ensure optimal meshing between them, and clean them promptly to maintain proper gear and shaft alignment. Regularly inspect the condition of different connection points in the transmission: During routine maintenance, check the condition of all connection points in the transmission to promptly identify any issues such as looseness, wear, or damage. Tighten any loose connections immediately and repair or replace damaged parts as needed. Regularly inspect the oil seals at the shaft ends and external joints for any oil leaks or seepage, and replace any failed seals or gaskets promptly.
5
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.