What Causes Loud Noise from Car Compressor?

2 Answers
GabrielMarie
07/25/25 7:52am
The reasons for loud noise from car air conditioning compressor are as follows: 1. Air conditioning: Poor heat dissipation in the air conditioning system causes excessive load on the compressor. In this case, it is recommended to clean the dirt on the surface of the radiator and condenser. 2. Blockage: There is a blockage in the air conditioning system. Focus on checking the air conditioning expansion valve. If the expansion valve is blocked, it needs to be replaced. 3. Intrinsic issue: The problem lies with the air conditioning compressor itself. Excessive noise caused by worn pump head bearings requires replacement of a new air conditioning compressor. The car air conditioning compressor is the heart of the car air conditioning refrigeration system, responsible for compressing and delivering refrigerant vapor. Compressors are divided into two types: fixed displacement and variable displacement.
Was this review help?
18
5
Share
SanAddyson
08/10/25 6:43pm
Excessive compressor noise has several common causes. If the internal bearings of the compressor are worn or damaged, they will produce sharp metal friction sounds during operation, especially noticeable at high speeds. Loose mounting points are also common - if bolts aren't tightened properly, the entire unit vibrates excessively, creating a roaring noise. Refrigerant imbalance is another factor, where unstable pressure causes the compressor to operate erratically, increasing noise. Issues with the belt system, such as improper tension or aging wear, can also amplify sounds. When I encounter this problem during repairs, I first use a stethoscope to identify the source location, then promptly replace bearings or resecure components. Don't delay, as prolonged noise may cause damage to other components and affect AC efficiency. Regular lubrication maintenance can prevent such issues and keep the system running smoothly.
Was this review help?
7
4
Share
Expand All
More Forum Discussions

What are the dimensions of the Forester?

The length, width, and height dimensions of the Forester are 4655mm/1815mm/1730mm, which are official data. The length of the Forester refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane and touching the outermost protruding parts at the front and rear of the vehicle; the width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and touching the outermost rigid fixed protruding parts on both sides of the vehicle; the height refers to the distance between the highest point of the vehicle and the vehicle's support plane. The naturally aspirated engine of the Forester has a maximum power of 113kW and a maximum torque of 196 Nm. This engine reaches its maximum power at 5800 to 6000 rpm and its maximum torque at 4000 rpm. It is equipped with direct injection technology and uses an aluminum alloy cylinder head and block. This engine is paired with a continuously variable transmission (CVT). The state has relevant regulations regarding vehicle dimensions. According to the national standard "GB1589-89," the total width of a vehicle does not include side mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking between adjacent lanes. This means that, under national standards, the significance of vehicle width data is to ensure enough space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, the national regulation stipulates that the total width of a vehicle must not exceed 2.5m to meet the usage requirements of public roads.
2
3
Share

How does the adhesion of motor vehicles change with speed when driving on wet roads?

When driving on wet roads, the adhesion of motor vehicles decreases sharply as speed increases. Here are some precautions for driving in rainy weather: 1. Reduce speed: Regardless of road width or surface conditions, slow down when driving in the rain, always pay attention to the distance between vehicles ahead and behind, and be mentally prepared to take various emergency measures. Visibility is low in rainy weather, and the field of vision is poor. The emergency performance of vehicles, such as braking distance, will also be reduced, so it is necessary to slow down in advance, leaving sufficient time and space to handle situations to ensure safety. 2. Maintain distance: When driving in the rain, visibility is obstructed, so it is important to maintain a safe distance between vehicles, constantly observe the distance between vehicles ahead and behind, and increase the safety distance. Especially stay away from large vehicles, as they can block your view; moreover, large vehicles may pass through waterlogged areas that smaller vehicles cannot, and they are prone to splashing water waves, which can interfere with the driving of smaller vehicles. 3. Use fog lights when driving in the rain: Make full use of fog lights to enhance driving safety in rainy weather. If necessary, turn on the hazard warning lights so that vehicles behind can always be aware of the situation ahead. 4. Do not restart after stalling: In heavy rain or stormy weather, some road sections may become severely waterlogged in a very short time. If you have to drive through water, use a low gear and pass at a constant speed. If the vehicle stalls while moving, do not attempt to restart it. Blindly restarting may cause the engine to be scrapped. After the vehicle stalls, contact a professional repair shop promptly. Only after the maintenance personnel have inspected the vehicle on-site and confirmed that there are no problems can the vehicle be restarted.
1
1
Share

How Often Should the Nissan Sylphy Be Serviced?

The maintenance cycle for the Sylphy starts with the first service at 2,500 kilometers or three months after purchase, followed by servicing every 5,000 kilometers thereafter. The frequency of routine maintenance depends on the type of engine oil used: mineral oil should be changed approximately every 5,000 kilometers, semi-synthetic oil every 7,000 kilometers, and full-synthetic oil every 10,000 kilometers. It is recommended to visit a 4S dealership for a comprehensive evaluation based on driving needs and vehicle condition to determine the exact maintenance schedule. Below is an introduction to car maintenance: 1. Exterior Inspection: Before driving, check the doors, hood, trunk, and glass condition. Inspect the body for damage, tilting, oil leaks, or water leaks. 2. Engine and Various Fluids: Check the fastening of engine components and inspect for oil or coolant leaks at engine joints. Adjust and tighten belts as needed, and check the fastening of hoses and wiring. Top up engine oil, coolant, and battery electrolyte if necessary. 3. Tires: Inspect tire wear and clean the trunk. Replace tires when they approach the wear indicators. Check for bulges, abnormal wear, aging cracks, or other damage. 4. Cleaning and Lubrication: Clean grease from the engine compartment hood, door hinges, and trunk hinges, and lubricate them. Antifreeze typically has a lifespan of 2 years and should be replaced during maintenance, with a thorough cleaning of the cooling system. Due to the hygroscopic nature of the braking system, brake fluid should be replaced every two years.
7
0
Share

What Causes the Engine Malfunction Indicator Light to Illuminate?

Reasons for the engine malfunction indicator light illuminating: 1. Sensor damage, poor contact, or signal interruption; 2. Poor engine maintenance; 3. Low-quality fuel or engine oil; 4. Incomplete combustion of the air-fuel mixture; 5. Spark plug or ignition coil failure; 6. Fuel pump malfunction or fuel line blockage; 7. Clogged air conditioning filter. An engine is a machine capable of converting other forms of energy into mechanical energy, typically transforming chemical energy into mechanical energy. This includes internal combustion engines, external combustion engines, jet engines, electric motors, etc. It can refer to both the power generation device and the entire machine including the power unit.
9
5
Share

How to Choose the Right Engine Oil Type?

Engine oil type selection should be based on the specific vehicle model and manufacturer's recommended standards. You can refer to the vehicle maintenance manual, which will indicate the recommended engine oil type. Engine oil, also known as engine lubricant, is an essential lubricant that ensures the normal operation of the engine. Its functions include lubricating metal components, reducing friction between parts, dissipating the immense heat generated during engine operation, as well as providing sealing, rust prevention, corrosion resistance, shock absorption, and cleaning effects. Engine oil consists of two main components: base oil and additives. The base oil is the primary constituent of the lubricant, determining its fundamental properties, while additives compensate for and improve any deficiencies in the base oil's performance, imparting new characteristics and serving as a crucial component of the lubricant.
12
0
Share

Which car series does Buick belong to?

Buick is an American car brand marketed by General Motors in the United States, Canada, and China. The Buick lineup includes models such as Excelle, Verano, Envision, Regal, LaCrosse, Enclave, Envision, Encore, GL8, GL6, and the all-electric VELITE6. Taking the Buick Regal as an example, this car is a mid-size sedan with body dimensions of 4913mm in length, 1863mm in width, and 1462mm in height. In terms of suspension, the Buick Regal uses a MacPherson strut front suspension and a multi-link rear suspension. Exterior-wise, the Buick Regal features a large-sized winged chrome grille that extends horizontally from the centerline.
11
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.