What Causes Intermittent Car Starting Issues?

1 Answers
VanKai
07/24/25 10:03pm
Intermittent car starting issues can be caused by the following reasons: 1. Steering wheel in locked position: Many drivers encounter situations where the car won't start and the key won't turn. This usually happens when the steering wheel isn't straightened after parking (at an angle exceeding 30 degrees), triggering the automatic steering lock as an anti-theft feature. 2. Gear not in Park position: For automatic transmission vehicles (AT, CVT, AMT), always ensure the gear is in P position when starting. 3. Smart key battery depletion: If the dashboard displays "key not detected" despite the key being inside the car, the smart key battery might be weak, preventing the system from detecting its signal. 4. Dead car battery: Failure to start could result from battery drain (e.g., leaving headlights on) or expired battery life. Refer to your maintenance manual for timely replacement. 5. Empty fuel tank: If the fuel gauge shows below the red line, the car naturally won't start. Also pay attention to fuel quality.
Was this review help?
8
3
Share
More Forum Discussions

The Difference Between Torsion Beam Non-independent Suspension and Multi-link Independent Suspension

Torsion beam non-independent suspension is a type of semi-independent suspension. Its basic structure consists of a main beam between the two wheels, with the wheels connected to the main beam via a composite spring structure. The advantages are its simple structure and space-saving design. The disadvantages include poor high-speed stability, less comfort, and average handling performance. However, handling can be improved by adding a stabilizer bar and Watt's linkage. Multi-link independent suspension is composed of multiple links, shock absorbers, and damping springs. Its advantages include achieving the optimal position for the kingpin caster angle, significantly reducing front-to-back forces from the road surface, thereby improving smoothness and comfort during acceleration and braking. It also ensures stability during straight-line driving, as the lateral displacement of the wheels caused by the stretching or compression of coil springs is minimal, reducing the likelihood of non-linear driving. During vehicle turns or braking, the multi-link suspension structure can create positive toe-in for the rear wheels, enhancing control performance and reducing understeer. The disadvantages are its large space occupation and high cost.
2
3
Share

What brand of tires does the Lingdong use?

The Lingdong uses Nexen tires, which prioritize comfort and grip. The tire specifications for the Lingdong are: 205/55R16 and 225/45R17. The Lingdong is equipped with a 1.4T engine paired with a dual-clutch transmission. In terms of interior design, the Lingdong features a dashboard tilted towards the driver's side, dual-dial instrument cluster, three-spoke multifunction steering wheel, 8-inch central display screen, and a separate air conditioning status display. The dimensions of the Lingdong are 4610mm in length, 1800mm in width, and 1450mm in height.
19
2
Share

What is the Lynk & Co 03?

Lynk & Co 03 is the first sedan product under the Lynk & Co brand and also the first sedan built on the CMA (Compact Modular Architecture) platform. In terms of exterior design, the production model of the Lynk & Co 03 features split-type headlights, a horizontal grille, and other design elements that maintain a high degree of similarity with the Lynk & Co 03 concept car. For powertrain, the Lynk & Co 03 is equipped with a 1.5T direct-injection engine, delivering a maximum power of 132kW (179Ps) and a peak torque of 265Nm, paired with a 7-speed dual-clutch transmission. Regarding dimensions, the Lynk & Co 03 measures 4658mm in length, 1840mm in width, and 1459mm in height.
12
4
Share

Which city does the license plate 'Hei E' belong to?

Hei E is the license plate code for Daqing City in Heilongjiang Province. The license plate codes for various regions in Heilongjiang are as follows: Hei A for Harbin, Hei B for Qiqihar, Hei C for Mudanjiang, Hei D for Jiamusi, Hei E for Daqing, Hei F for Yichun, Hei G for Jixi, Hei H for Hegang, Hei J for Shuangyashan, Hei K for Qitaihe, Hei L for counties and county-level cities under Harbin, Hei M for Suihua, Hei N for Heihe, Hei P for Daxing'anling Prefecture, and Hei R for Heilongjiang Agricultural Reclamation Administration Bureau. The first character of the license plate is a Chinese character representing the abbreviated name of the province where the vehicle is registered. The second character is an English letter representing the code for the prefecture-level city where the vehicle is located, with A being the provincial capital, B the second-largest city in the province, and C the third-largest city.
17
5
Share

Can Asphalt Cleaner Be Sprayed on Headlights?

Asphalt cleaner can be sprayed on headlights. Here is some relevant information about asphalt cleaner: 1. Main Uses: A new industrial-grade powerful cleaning solution designed for use in homes, cars, ships, and RVs, etc. It can effectively remove grease, road stains, car-induced ground stains, and stubborn grease around houses. Suitable for any cleanable surface, it can powerfully eliminate heavy stains. 2. Precautions: Asphalt cleaner has a pungent smell, which is inherent to its composition. It does not damage the car's paint because the composition of the paint differs from that of paint and asphalt stains. Asphalt cleaner can dissolve paint and asphalt, but it does not chemically react with the paint's composition. If you are concerned about potential damage to the paint, after using the asphalt cleaner to remove stubborn stains from the car's surface, you can wipe it clean with a soft cotton cloth dipped in clean water.
17
2
Share

How to Replace the Battery in a Lae Festa Key Fob?

The method to replace the battery in a Lae Festa key fob: 1. There is a silver round button at the top of the key fob's front side, press this button; 2. With the other hand, grasp the silver part at the top and pull out the mechanical key; 3. Insert the mechanical key back halfway and turn it clockwise to separate the key fob's cover, or use a small flathead screwdriver to pry it open; 4. Once a gap appears, use your hands to split the key fob cover into two halves, one of which has a rubber pad and circuit board, remove the rubber pad; 5. Continue using a small knife or flathead screwdriver to pry open the circuit board along one side; 5. After prying open the circuit board, you will see the round coin battery inside, remove the old battery and replace it with a new one.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.