What Causes Engine Shaking When Idling but Not While Driving?

1 Answers
LaGemma
07/29/25 1:19pm
Engine shaking when idling but not while driving may be caused by excessive carbon buildup inside the car's engine. Below are some relevant points about engine maintenance: 1. Regular oil changes: Engine oil serves as a lubricant, providing lubrication, cleaning, cooling, sealing, and wear reduction for the engine. It is essentially the engine's "lifeblood." Prolonged failure to change the oil can lead to severe wear on engine components and reduce the engine's lifespan. Manufacturers recommend changing the oil every 5,000 to 10,000 kilometers. 2. Regular replacement of the three filters: The three filters refer to the air filter, oil filter, and fuel filter. These filters help remove impurities, protecting the engine and improving its efficiency. The replacement intervals for these filters typically align with oil change schedules. 3. Regular inspection of power steering fluid: Commonly known as steering fluid, it should be checked periodically for leaks or unusual noises. 4. Regular inspection of brake fluid levels: Brakes are crucial for driving safety, and brake fluid is highly hygroscopic, meaning it can absorb moisture from the air automatically.
Was this review help?
6
0
Share
More Forum Discussions

Why can't the Haval H2 start?

Possible reasons why the Haval H2 with one-button start cannot start are as follows: the gear was not returned to P when parking, the steering wheel is in a locked position, the smart key is out of battery or not within the remote sensing range, the battery is dead, it's cold and no antifreeze was added, or there is no fuel, which can also prevent the car from starting. Below is additional information about the Haval H2: 1. Design: As an additional model, the new car still adopts the design of the current model, continuing to use the hexagonal family-style grille, which is overall fashionable and sporty. The new car is equipped with a wealth of safety features, including ESP, TCS traction control, HHC hill assist, MI rollover prevention system, HDC hill descent control, and more. 2. Powertrain: In terms of power, the new car has upgraded its powertrain system, equipped with a GW4G15F 1.5T turbocharged engine, with a maximum power of 110kW (150PS) and a peak torque of 210Nm. The transmission is matched with a 6-speed manual or 7-speed dual-clutch gearbox, and the entire series meets the National 6 emission standard.
7
0
Share

What is the fuel consumption of the Geely Xingyue L?

1. The 1.5T engine version of the Xingyue has a fuel consumption of approximately 8.8 liters per 100 kilometers, while the 2.0T engine version consumes about 9.6 liters per 100 kilometers. Here are the relevant details: 1. 1.5-liter turbocharged engine: The Xingyue is a compact sport SUV under Geely, equipped with two engines: a 1.5-liter turbocharged engine and a 2.0-liter turbocharged engine. The 1.5-liter turbocharged engine, codenamed JLH-3G15TD, is a three-cylinder engine with a maximum power of 130 kW and a maximum torque of 255 Nm. It features direct fuel injection technology and uses an aluminum alloy cylinder head and block. This engine is paired with a 7-speed dual-clutch transmission. 2. 2.0-liter turbocharged engine: The 2.0-liter turbocharged engine, codenamed JLH-4G20TDB, delivers a maximum power of 175 kW and a maximum torque of 350 Nm. It also features direct fuel injection technology and an aluminum alloy cylinder head and block. This engine is paired with an 8-speed automatic transmission.
3
1
Share

Where is the central locking control box located in the Besturn B70?

The central locking control box of the Besturn B70 is located under the handbrake. Controller: The controller consists of two parts: one is the power window control circuit, and the other is the central locking control circuit. These two circuits are independent of each other and do not interfere with one another. Procedure for removing the car window regulator switch: Turn off the ignition switch and all electrical appliances, and remove the ignition key from the 0 (pre-lock position) position. Use the pry bar set -NST1055– to unlock the locking lug -arrow- on the front side of the handle cover -1- and pull it out along the -arrow- direction from the door trim. Disconnect the plug connections -1- and -2-, and remove the handle cover. Unlock the locking lug -arrow- and remove the button module -1- from the handle cover.
19
3
Share

How to Solve the Triangle Exclamation Mark in the Reversing Camera?

The appearance of a yellow exclamation mark is due to the absence of a reversing camera signal, so you can check the reversing camera and its wiring. Here are some related introductions about the reversing camera: 1. Solution to the triangle exclamation mark in the reversing camera: The appearance of a yellow exclamation mark is due to the absence of a reversing camera signal, so you can check the reversing camera and its wiring. 2. The role of the reversing camera: The system makes the situation behind the car more intuitive and clear when reversing, which is one of the very practical configurations for reversing safety. When the reverse gear is engaged, the system will automatically activate the high-definition reversing camera located at the rear of the car, clearly displaying the situation behind the car on the reversing LCD screen, accurately grasping the road conditions behind, making reversing as easy and confident as moving forward.
4
2
Share

What is the difference between GL4 and GL5 gear oil?

The differences between GL4 and GL5 gear oil are as follows: 1. GL-5 grade gear oil contains more sulfur compared to GL-4 grade oil. 2. GL-4 grade is a medium-duty gear oil, suitable for differential gears, transmission gears, and steering gears. 3. GL-5 is a heavy-duty gear oil, suitable for differential gears and rear axle gears operating under extremely harsh conditions. Here is more information about gear oil: 1. Gear oil mainly refers to the lubricating oil used in transmissions and rear axles. It differs from engine oil in terms of usage conditions, composition, and performance. 2. Gear oil primarily functions to lubricate gears and bearings, prevent wear and rust, and assist in heat dissipation for gears. 3. Automotive gear oil is used in gear transmission mechanisms such as steering systems, transmissions, and drive axles. Due to the high surface pressure during gear transmission, gear oil plays a crucial role in lubrication, anti-wear, cooling, heat dissipation, anti-corrosion, rust prevention, cleaning, and reducing gear surface impact and noise.
2
1
Share

Will the fuel tank cap trigger an alarm if not tightened properly?

The fuel tank cap not being tightened properly will not cause the engine malfunction indicator light to illuminate. The light only activates due to internal engine malfunctions. Below is an introduction about fuel tanks: 1. Introduction: The automotive fuel tank is the full name for a car's fuel container. Currently, with the development of the automotive industry and the revitalization of domestic automobile manufacturing, there is a noticeable increasing demand for automotive fuel tanks among major automobile manufacturers. 2. Principle: Utilizing the heat energy generated by the engine during vehicle operation, a thermal circulation system is added between the engine, fuel tank, and radiator. 3. Classification: Fuel tanks can be made of iron or aluminum alloy. With the development and application of various new materials, the rust prevention issue of iron fuel tanks has become the most significant quality concern. This is especially true today with an emphasis on environmental protection. In the heavy-duty truck sector, the quality of fuel in China affects the advancement of new vehicle models, with the quality of the fuel tank, which holds the fuel, being a critical factor.
17
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.