What causes abnormal noises when a Volkswagen Polo is running?

2 Answers
AshleyLee
09/08/25 2:12am
The reasons for abnormal noises when a Volkswagen Polo is running are as follows: Oil issue: The engine oil does not fully lubricate all components of the engine. After running for a while, the new oil can evenly lubricate all parts of the engine. If the problem persists after some time, it may be due to severe wear. Cleaning the internal parts of the engine can reduce the abnormal noise. Poor sealing: Large gaps and poor sealing can lead to deteriorating engine conditions, which may also cause abnormal noises. It is recommended to visit a repair shop for inspection. Maintenance issue: If maintenance is neglected, excessive carbon buildup in the machine (such as excessive carbon in the engine, throttle, spark plugs, etc.) may be the cause. A visit to a repair shop for cleaning should resolve the issue.
Was this review help?
14
1
Share
BriellaLee
09/19/25 7:55am
I've been driving a Volkswagen Polo for several years, and the strange noises while driving are quite annoying. The most common issue is uneven tire pressure causing rubber friction sounds, or loose suspension components like worn shock absorbers making creaking noises. Another possibility is uneven brake discs or loose brake pads, which produce clunking sounds when braking. Body parts such as aging door seals or loose seat buckles can also squeak, especially noticeable when going over speed bumps. I've also experienced the hood not being closed tightly, resulting in a whooshing wind noise. For self-inspection, first, park and check if the tire pressure is normal, then listen to the source of the noise. Front wheel noises are often due to bearing issues, while rear noises might indicate a loose exhaust. Don't ignore strange noises while driving; get them checked at a professional shop promptly to avoid minor issues leading to major accidents. Safety comes first.
Was this review help?
13
0
Share
Expand All
More Forum Discussions

Where is the license plate number Min K from?

Min K is the license plate code for Pingtan County, Fuzhou City, Fujian Province. Here is the relevant content introduction: 1. The first character of the license plate number is a Chinese character, mainly representing the abbreviation of the province where the vehicle is located. The second character is an English letter representing the prefecture-level administrative region where the vehicle is registered. Usually, A represents the provincial capital city, B represents the second largest city in the province, and so on. 2. The license plate refers to the vehicle license plate, which is a plate hung on the front and rear of the vehicle. The materials commonly used are aluminum, plastic, or stickers. The plate displays the vehicle's registration number, registration area, or other basic information. The license plate is the numbering of each vehicle, and its main function is to identify the province, city, and county to which the vehicle belongs. The vehicle management office can trace the owner of the vehicle based on the license plate. 3. The colors of the license plates used by vehicles are different. Small vehicles use blue license plates, large and medium-sized vehicles use yellow license plates, white license plates indicate military vehicles, police cars also use white license plates, and black license plates indicate foreign vehicles.
7
1
Share

What is the correct way to use a manual transmission?

The correct way to use a manual transmission is as follows: 1. First gear is the starting gear, used for vehicle launch. It has a similar gear ratio and performance to reverse gear, so it's not suitable for prolonged high-speed operation. Generally, you can shift to second gear once the vehicle starts moving and gains momentum; 2. Second gear is the passing gear, mainly used for navigating complex road conditions and handling complicated situations; 3. Third gear is the transition gear, primarily used for low-speed driving in urban areas; 4. Fourth gear is the cruising gear, mainly used for extended periods of high-speed or economical driving. Most vehicles achieve their most fuel-efficient speed in the lower speed range of fourth gear; 5. Fifth gear is the high-speed gear, mainly used for long-distance highway driving.
19
4
Share

Which country is Spirt car wrap from?

Spirt car wrap is produced in Germany. Below is an introduction to the functions of car wraps: 1. Full vehicle coverage: Without damaging the original car paint, it allows you to freely change the body color and coating. With superior product quality and application techniques, it enables complete coverage of the entire vehicle surface without seams, perfectly showcasing the streamlined body. 2. Flexible and smooth: Compared to a full-body paint job, car wrap application is simpler and provides better protection for the vehicle's integrity. It offers greater autonomy in color matching and eliminates the issue of color differences between different parts of the same color. 3. Long-lasting durability: Utilizing nano-level production technology, the product is fine and tightly woven, offering strong wear resistance and durability. The color remains stable over time, without fading or discoloration.
13
1
Share

What does parking system failure mean?

Parking system failure refers to the inability to achieve automatic braking function due to sensor issues. The parking system is an automatic braking feature that, once activated, simplifies operations such as not needing to pull the handbrake when stopping at a red light, avoiding the use of manual or electronic handbrakes. For automatic transmission models, it also eliminates the need for frequent shifting between D to N or D to P. The automatic parking system is a technological application that enables automatic handbrake functionality while the car is in operation. This technology allows drivers to avoid prolonged braking when the vehicle is stationary and prevents unnecessary sliding when the automatic electronic parking brake is engaged. The implementation of the automatic parking system function is not simply achieved by using an electronic handbrake.
13
1
Share

How to Replace the Oil Filter?

Method for replacing the oil filter: 1. Since most vehicles use oil filters of different models and sizes, prepare the appropriate tools; 2. Drain the old oil, place the waste oil pan, then use a wrench to unscrew the oil drain plug counterclockwise to let the old oil drip out; 3. Remove the oil filter. After draining the old oil, open the engine oil cap, use a filter wrench to loosen the oil filter counterclockwise, and unscrew the oil filter from the engine compartment; 4. Reinstall the oil filter. Before installation, place the sealing ring over the oil outlet, then slowly screw the new oil filter into place. Do not overtighten the filter—hand-tighten it first, then use a wrench to tighten it an additional 3-4 turns; 5. Add new oil to the oil tank. The oil filter, also known as the oil purifier, functions to remove debris, gum, and moisture from the oil, delivering clean oil to all lubrication points.
5
4
Share

What are the body dimensions of the Edge?

The body dimensions of the Edge are 4585mm in length, 1882mm in width, and 1688mm in height, with a wheelbase of 2710mm. The Ford Edge is positioned as a compact SUV within the Ford lineup, situated between the Edge and the Escape in terms of model hierarchy. In terms of exterior design, the Edge adopts a new family-style design language, featuring a signature octagonal front grille with rounded corners and chrome accents for a more pronounced visual effect. The interior of the Edge is relatively minimalist, with the visual focus on the 12.3-inch floating touchscreen, which includes an infotainment system capable of various connectivity features.
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.