What car is the one with the 'Song' badge?

Can Lane Change Assist Avoid Blind Spots?

Lane change assist can help avoid blind spots. Here is more information about lane change assist: 1. Vehicles equipped with a lane change assist system can use rearview mirror-mounted radar or warning lights to alert the driver whether it is safe to change lanes. 2. The lane change assist system often automatically activates only when the vehicle speed exceeds 60 km/h during a lane change. It does not activate at lower speeds. Lane change assist serves only as a warning device and does not assist the driver in completing the lane change maneuver. 3. The lane change assist system can detect vehicles approaching from the side or rear up to 50 meters away. If the system detects another vehicle, it alerts the driver via an LED indicator on the rearview mirror. If the driver activates the turn signal while preparing to change lanes but fails to notice other vehicles in the adjacent lane, the system will flash the LED to warn the driver.

11

1

Share

What Letter Represents the Parking Gear?

P stands for Parking gear, used when parking. The following are the meanings of the letters on an automatic transmission: 1. P gear is the parking gear on an automatic transmission car. When parking, shift the gear to P to prevent the vehicle from rolling backward. 2. R gear is the reverse gear of an automatic transmission car. After shifting into R gear, the car will generate backward traction, which is used for reversing into parking spaces and parallel parking. 3. N gear is the neutral gear of an automatic transmission car. Unlike manual transmission cars, it does not completely disconnect the transmission from the engine, so N gear cannot be used for coasting and should only be used briefly when waiting at traffic lights. 4. D gear is the drive gear of an automatic transmission car. Simply shift into D gear, press the accelerator to speed up, and press the brake to slow down to drive the vehicle. 5. S gear is the sport gear of an automatic transmission car. It allows the car to deliver stronger power and acceleration, suitable for use on highways and in congested traffic. 6. L gear is the low gear of an automatic transmission car, also known as the climbing gear. It reduces the car's speed to ensure the engine delivers strong power, often used on bumpy roads or for long uphill climbs to provide sufficient power. 7. M gear is the manual gear on an automatic transmission car. After switching to M gear, you can perform upshifts and downshifts to match the gear accuracy required during actual use.

18

5

Share

Where Does Water Enter the Engine From?

Engine truly can enter water at the air intake, which is the air filter's intake area. The plastic pipes from the air intake to the throttle must be well sealed to prevent water from entering the engine. Solutions for engine water ingress: 1. If the engine stalls due to water ingress, do not attempt to restart it immediately. In this situation, the cause of the stalling cannot be immediately determined, and rash actions may cause unpredictable greater damage to the vehicle. The best course of action is to push the vehicle to a safe location manually and then call for assistance. 2. If the vehicle is simply flooded while stationary, there is no need to worry excessively as it will not cause irreversible damage to the engine, and the repair costs are relatively low. In such cases, the usual remedy is to drain the accumulated water from the engine. 3. Inspection method: The simplest way is to check if the engine oil color has changed abnormally. If the oil turns milky white, it indicates that water has entered the fuel tank or engine.

13

2

Share

What Causes White Smoke from the Exhaust Pipe?

There are several reasons why white smoke may appear from the exhaust pipe: 1. When white smoke is observed from the exhaust pipe, it may be due to a dirty air filter, which restricts airflow. Alternatively, it could be caused by a malfunctioning carburetor or a contaminated oxygen sensor in the exhaust pipe, leading the engine control unit (ECU) to provide incorrect air-fuel mixture information. 2. Normal white smoke is simply exhaust gases being expelled. When these gases cool to a certain temperature, they condense into water droplets. If the engine emits excessive white smoke or water vapor, check for water contamination in the fuel tank, a damaged cylinder head gasket, cracks in the cylinder block, or faulty cylinder sleeve seals. 3. High temperatures in the combustion chamber can cause gases to leak into the oil pan, contaminating the engine oil. This is a common issue, so it's crucial to maintain the correct oil level—neither too much nor too little. Typically, exhaust gases consist of water vapor, but during cold starts with high idle speeds, this vapor may appear as white smoke. 4. If white smoke appears during a cold start but disappears as the engine warms up, this indicates efficient combustion. The white smoke is caused by hot steam condensing in cold air, which is a normal phenomenon.

11

4

Share

What brand is the Porsche 718 audio system?

Porsche uses the highly renowned Bose audio system, which is commonly found in many car brands. Here is some relevant information about the audio system: 1. The Porsche 718 further enriches its luxurious configurations, incorporating sporty characteristics. The luxury aspect is prominently reflected in the Bose audio system. 2. Bose audio systems are widely used in high-end home audio, professional venue audio, aerospace, and premium car audio systems. 3. The audio system is designed to alleviate the monotony of travel for drivers and passengers, originally starting with car AM radios, then progressing to AM/FM radios, cassette players, and evolving to CD players and compatible DCC and DAT digital audio systems. Today, car audio systems have reached high standards in sound quality, operation, and vibration resistance, ensuring stable performance and perfect sound quality even on rough roads.

2

4

Share

What are the differences between R16 and R17 tire specifications?

The main differences between R16 and R17 tire specifications are as follows: 1. Size difference. R16 tires indicate that they are suitable for 16-inch rims, which are relatively smaller in size; R17 tires indicate that they are suitable for 17-inch rims, which are larger in size compared to R16. 2. Aspect ratio difference. The larger the tire size, the lower the aspect ratio. Tires with lower aspect ratios perform better in reflecting road information and providing lateral support during driving. Smaller tires have higher aspect ratios, which offer better comfort for the driver but relatively weaker performance in reflecting road information and providing lateral support. 3. Visual difference. Larger tires provide a stronger visual impact, making the car appear more imposing. Smaller tires make the wheels look less impressive, and the overall vehicle's presence may seem somewhat lacking. 4. Driving experience difference. R16 tires have thicker sidewalls, providing better cushioning on bumpy roads. R17 tires offer more responsive handling at high speeds, but they transmit more road feedback on uneven surfaces and have weaker cushioning capabilities. 5. Safety difference during a blowout. Due to the larger diameter of R17 rims, the vehicle body tilts less during a blowout, reducing the likelihood of sudden directional changes.

13

0

Share

What car is the one with the 'Song' badge?

Can Lane Change Assist Avoid Blind Spots?

What Letter Represents the Parking Gear?

Where Does Water Enter the Engine From?

What Causes White Smoke from the Exhaust Pipe?

What brand is the Porsche 718 audio system?

What are the differences between R16 and R17 tire specifications?

What are the symptoms of a damaged half shaft?

What is the function of a high-pressure fuel pump?

How Often Should the Charcoal Canister Be Replaced?

Is it considered overloading to drive with five adults and one child?