What car has an inverted triangle logo?

How to switch between fuel and electric power in BYD Qin?

BYD Qin can switch between fuel and electric power by selecting different driving modes. The relevant information is as follows: 1. The second-generation DM technology equipped in BYD Qin has four working modes, namely EV+ECO, EV+SPORT, HEV+ECO, and HEV+SPORT. Especially in HEV+ECO mode, different power distributions are made under different working conditions to achieve the best comprehensive economy, allowing for free switching. When the starting speed is below 40KM/H, it is driven purely by electricity. When the speed exceeds 40KM/H and the engine is in the economical fuel consumption zone (1500-3500 rpm), it is driven by fuel. 2. The driving modes of BYD Qin include pure electric plus economy, pure electric plus sport, hybrid plus economy, and hybrid plus sport.

19

0

Share

Release the Clutch or Brake First?

Braking and deceleration require coordination between the clutch and foot brake. The best practice for braking and deceleration is to press the brake first, and when the speed reaches a certain level, then press the clutch to shift gears. Alternatively, by utilizing engine braking, you can also press the brake first, and when the speed reaches a certain level, press the clutch to assist in deceleration without shifting gears. Here are some additional details: 1. Regardless of how you decelerate, always press the brake first. When the clutch is pressed, the clutch separates from the transmission shaft, putting the car in a neutral state. In this situation, pressing the brake again may cause the car to skid. Drivers with less experience may struggle to maintain vehicle stability. Therefore, when not stopping or shifting gears, there is no need to press the clutch. When decelerating, press the brake first. If the speed drops significantly, you can choose to press the clutch and shift gears. 2. Frequently pressing the clutch can damage the car. However, one important thing to note is that when the speed and gear do not match, it can easily cause the engine to stall. When decelerating by pressing the brake, always pay attention to the timing of pressing the clutch or consider skipping gears to shift to a lower speed.

6

0

Share

What are the components of a universal transmission device?

Universal transmission devices mainly consist of universal joints, drive shafts, and intermediate supports. The detailed introduction is as follows: 1. A universal transmission device is used to transmit power between two shafts whose relative positions constantly change during operation. 2. Its function is to connect the transmission output shaft and the main reducer input shaft that are not on the same straight line, ensuring reliable power transmission even when the angle and distance between the two shafts frequently change. 3. Universal transmission devices are installed between the transmission and the drive axle, as well as between the inner and outer half-shafts of the steering drive axle. During installation, the universal joint forks at both ends of the drive shaft must be aligned in the same plane.

3

1

Share

How to Clear Cadillac Seat Memory?

After readjusting, press the set button, then quickly press 1. You will hear two beeps indicating the adjustment is complete. Here are the detailed instructions: 1. To recall the memory, simply press and hold "1", and the rearview mirror will automatically return to the memorized position. Please note that the memory seats and rearview mirror memory are saved as a group. Therefore, when adjusting, be sure to adjust both the rearview mirror memory and seat memory together. 2. The vehicle will recognize the current driver's remote key number (1 or 2). Remote keys 1 and 2 can be used for automatic memory recall. During the first few ignition cycles after changing the remote key, the Driver Information Center (DIC) welcome message may display the remote key number. To ensure automatic memory recall works properly, save the position to the memory button (1 or 2) that matches the remote key number shown in the DIC welcome message. When entering the vehicle, carry the associated remote key. After vehicle maintenance, memory adjustments may not be available, and you will need to re-perform the setup steps in the "Save Memory Position" section.

4

2

Share

What should be paid attention to in Subject 4?

Subject 4 exam precautions include the following points: 1. Before the exam, make sure to adjust the camera properly, ensuring that the small camera is aligned with your face. 2. During the exam, carefully study each test question. 3. Finally, be cautious when clicking the mouse, avoid continuous clicking, and ensure accuracy. Here is additional information: 1. Subject 4, also known as the Subject 4 theory test or driver theory test, is part of the motor vehicle driver's license assessment. 2. After the implementation of the Ministry of Public Security's Order No. 123, the Subject 3 exam was divided into two parts: the road test and an additional safety and civilization knowledge test, commonly referred to as "Subject 4," which assesses "driving ethics." Since this test is conducted after Subject 3, it is habitually called the Subject 4 exam. Officially, there is no Subject 4. 3. The exam consists of 50 questions, presented in the form of case studies, images, animations, etc., with a full score of 100 and a passing score of 90. 4. Subject 4 extracts the requirements related to safe and civilized driving from the original Subject 1, including safe driving skills under complex conditions and emergency handling, and places them after the "Subject 3" practical road driving test to further assess the candidate's traffic quality.

11

4

Share

What type of battery does the Arrizo 5e use?

The Arrizo 5e is equipped with a ternary lithium battery. Relevant details are as follows: 1. The Arrizo 5e450 also supports two modes: ECO (Economy) and SPORT (Sport). The Economy mode extends the driving range, while the Sport mode enhances driving pleasure, allowing for effortless switching and a personalized driving experience. 2. The Arrizo 5e450 features a seven-level energy recovery system. During braking and coasting, the motor participates in regenerative braking, converting kinetic energy back into electrical energy for energy recovery, thereby extending the driving range. 3. The Arrizo 5e450 is also equipped with the ninth-generation Bosch ESP (Electronic Stability Program) and HAC (Hill Start Assist Control), ensuring smooth and stable passage whether on flat ground or steep slopes.

16

5

Share

What car has an inverted triangle logo?

How to switch between fuel and electric power in BYD Qin?

Release the Clutch or Brake First?

What are the components of a universal transmission device?

How to Clear Cadillac Seat Memory?

What should be paid attention to in Subject 4?

What type of battery does the Arrizo 5e use?

Will there be a fine if the vehicle inspection is overdue for a few days?

Can you turn right at a red light at a Y-shaped intersection?

Is the Honda CRV transmission using a steel belt or a steel chain?

What does SAE stand for?