What car has a large V-shaped logo?

Should the Positive or Negative Terminal Be Removed First When Disconnecting a Car Battery?

When disconnecting the battery cables, it is essential to remove the negative terminal first, followed by the positive terminal. In fact, there is no need to remove both terminals; simply disconnecting one end will break the circuit and stop power supply to the vehicle's devices. Below is a detailed explanation of the correct battery disconnection sequence: 1. Reason: The car's negative terminal is connected to the vehicle's body, which is made of metal. The entire body serves as the negative terminal, meaning any electrical component's negative side only needs to be grounded to the body. The current will then flow back to the negative terminal through the body, eliminating the need for separate wires to the negative terminal for each component. This significantly reduces wire usage and simplifies circuit troubleshooting. 2. Consequences: Disassembly tools are typically made of metal. If the positive terminal is removed first and the metal tool accidentally touches any metal part of the vehicle body, it would directly connect the battery's positive and negative terminals, causing a short circuit. In severe cases, this could even lead to a fire. Additionally, since metal tools conduct electricity, holding them directly in hand poses a potential hazard. Therefore, removing the negative terminal first is the correct and safer choice.

11

1

Share

What does a test vehicle mean?

Test vehicles generally refer to the first few batches of vehicles that roll off the production line after a new production line is operational and undergo some basic driving tests, such as crash tests, durability tests, emission tests, etc. The purpose of test vehicles is to conduct sufficient testing, verification, and road tests before they are launched on the market to ensure the quality of the new product. Test vehicles can be purchased under the following circumstances: 1. Static test vehicles are relatively better than road test vehicles. All newly manufactured vehicles undergo certain tests before being delivered to buyers. 2. If there is no damage, and the engine condition is no different from other stock new vehicles, it can be considered for purchase. Generally, as long as an invoice and a certificate of conformity are provided, the vehicle can be registered. 3. However, test vehicles are like used cars; it is necessary to clarify what tests they were used for. Some are used for engine tests, and some for chassis tests, both of which are fine. 4. Do not buy crash test vehicles, as they can be more troublesome than normal major accidents. Also, be careful not to buy vehicles with special configurations, as some special configuration vehicles may not have available spare parts.

2

0

Share

How Long Does It Take for Brakes to Recover After Changing Brake Fluid?

Soft brakes are closely related to the quality and performance of the brake fluid, as well as whether the brake fluid replacement operation was performed correctly. There are many complex reasons for soft brakes. To resolve the issue, the specific cause of the soft brakes must be identified and the related faults fixed. Therefore, soft brakes after changing the brake fluid will not recover on their own, and you should promptly visit a repair facility for maintenance. The following are common reasons for soft brakes in cars: 1. Air entering the brake system during brake fluid replacement. Brake fluid is the medium that transmits braking force. If air enters the brake fluid lines, the brake fluid will not provide sufficient force under high pressure, resulting in soft brakes. 2. Long-term neglect of brake fluid replacement. If brake fluid is used for an extended period, the accumulation of moisture and impurities inside will continuously increase, affecting the normal transmission of braking force. Therefore, regular brake fluid replacement is necessary to solve the issue of soft brakes. 3. Brake fluid leakage. Brake fluid is the primary medium for transmitting braking force. If there is a leak, the effectiveness of the braking force transmission will be compromised, leading to soft brakes. You can visit a 4S shop or a certified repair shop for inspection and repair.

18

3

Share

What is the maximum age limit for applying for a C1 driver's license?

For a C1 license, the maximum application age is 70 years old. After obtaining the license, there is no upper age limit, but individuals over 70 must submit an annual medical examination report. The C1 driver's license permits driving small and micro passenger vehicles, light and micro cargo trucks, as well as light, small, and micro special-purpose vehicles. Small passenger vehicles must accommodate 9 or fewer people. Large buses, tractors, city buses, medium-sized buses, large trucks, regular three-wheeled motorcycles, regular two-wheeled motorcycles, mopeds, wheeled self-propelled machinery, trolleybuses, and trams are not covered by the C1 license. Additionally, a C1 license holder cannot drive vehicles with more than 9 seats or cargo trucks exceeding 6 meters in total length. A C1 driver's license does not authorize the operation of motorcycles; driving motorcycles requires a D, E, or F license. While a C1 license allows driving all C2, C3, and C4 vehicle types, the driven vehicle must not exceed 6 meters in length, must have no more than 9 seats, and must be registered with a blue license plate. Even with a C1 license, the holder is not permitted to drive motorcycles, including two-wheeled and three-wheeled motorcycles.

14

2

Share

Is it necessary to install ETC?

It is necessary to install ETC. According to the regulations of the State Council, vehicles without ETC in 2020 will not enjoy toll discounts. In the future, only one manual lane will be retained at highway toll stations, and tolls can only be paid through manual lanes. Additionally, newly installed ETC devices cannot be used on highways immediately; they need to be activated before normal use. During free holiday periods, ETC users can still use highways, and no fees will be deducted when passing through ETC lanes. ETC Billing Principle: There will be one or more ETC lanes on highways. Through dedicated short-range microwave communication between the vehicle-mounted electronic tag installed on the windshield and the microwave antenna in the ETC lane, and using computer networking technology for backend settlement with banks, the system achieves the goal of vehicles paying tolls without stopping at toll stations. All of this is based on the principle of passing first and deducting fees later. Benefits of Installing ETC: Time-saving: Eliminates the hassle of waiting in queues; Green and eco-friendly: Reduces noise and exhaust emissions, minimizing pollution by allowing vehicles to pass toll stations without stopping; Reduced wear and tear: Saves costs by decreasing the frequency of vehicle starts and brakes, thus reducing wear and fuel consumption; Improved efficiency: ETC lanes can theoretically increase vehicle passing efficiency by 2-3 times, making traditional ETC more advanced, faster, and higher-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council clearly stated in the "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" that "by 2020, intercity transportation smart cards will be basically realized in key city clusters, and the proportion of vehicles equipped with ETC will significantly increase." It also set a target in the main indicators of the "13th Five-Year" comprehensive transportation development plan: "By 2020, the ETC usage rate for road passenger vehicles will reach 50%." More future possibilities: In addition to continuously improving the convenience of ETC installation and usage and increasing the ETC adoption rate for passenger vehicles, efforts will be made to promote ETC usage for trucks in the future. There will also be exploration of deep integration between ETC systems and smart transportation directions such as vehicle-to-vehicle communication and vehicle-road coordination, providing comprehensive travel services for car owners. This means more application scenarios will support ETC usage.

19

2

Share

What engine is used in the Trumpchi GM8?

GAC Trumpchi GM8 is the first MPV launched by GAC Trumpchi, equipped with a 2.0T turbocharged engine, with a maximum power of 185kw and a maximum torque of 390nm, matched with an 8-speed automatic transmission. The following is the relevant introduction about the Trumpchi GM8: 1. In terms of body size, its length, width and height are 5089mm, 1884mm and 1822mm respectively, and the wheelbase is 3000mm. 2. The front suspension type is MacPherson independent suspension, and the rear suspension type is multi-link independent suspension.

17

4

Share

What car has a large V-shaped logo?

Should the Positive or Negative Terminal Be Removed First When Disconnecting a Car Battery?

What does a test vehicle mean?

How Long Does It Take for Brakes to Recover After Changing Brake Fluid?

What is the maximum age limit for applying for a C1 driver's license?

Is it necessary to install ETC?

What engine is used in the Trumpchi GM8?

What Causes the Shock Absorber to Bottom Out When Driving Over Potholes?

How to Drive When Approaching the Top of an Uphill Road at Night?

What does the term 'permissible towing mass' mean?

Why can't car crystal coating be applied to glass?