What car brand has a dragonfly logo?

How to Deal with Low Tire Pressure in BMW?

Solutions for low tire pressure in BMW: Simply reduce your driving speed to continue normal driving, then go to a 4S shop to check the tire pressure and replenish it to the normal range. Methods to check whether the tire pressure is normal include: 1. Conduct a tire pressure test to ensure all four tires have the same pressure; 2. Inspect the tire wear condition, and determine whether the tires need replacement by checking the small triangle marks on the tire sidewalls; 3. Perform a dynamic balance test for each tire; 4. Remove any foreign objects stuck in the tire treads. The BMW X7 comes standard with full-range airbags, auto-dimming rearview mirror, automatic high beam control, active protection system, aluminum roof rack, front seat electric adjustment with lumbar support and heating, third-row seats, keyless entry, including trunk storage kit, smart touch key, and intelligent ambient lighting.

13

5

Share

Do you need to turn on the AC when using the car's cold air?

You need to turn on the AC when using the car's cold air; otherwise, the air conditioning system will only blow air at normal temperature. This is because the AC button controls the compressor, which is the main component of the cooling system. Keeping the air conditioning at a low temperature for a long time can create a large temperature difference between the inside and outside of the car, which may make you feel uncomfortable or even sick, and it will also increase fuel consumption. If you use the air conditioning for an extended period, it's advisable to open the windows to ensure good air quality inside the car. Additionally, before turning off the engine, you should turn off the air conditioning first to protect the compressor. While you need to turn on the AC for cold air, it's unnecessary to press the AC switch when using warm air, as the warm air simply transfers some of the heat originally dissipated by the radiator into the cabin.

14

2

Share

What Octane Gasoline Should the T-Roc Use?

The T-Roc should use 95-octane gasoline. The vehicle's manual specifies the recommended fuel grade for the engine, and there is also a fuel grade label on the inside of the fuel tank cap. However, it's important to note that gasoline grades are not uniform across all regions in China. The gasoline grade refers to the octane rating, which indicates the fuel's anti-knock properties—the higher the octane number, the better the anti-knock performance. The appropriate gasoline grade for a car is determined by the engine's compression ratio. The T-Roc is a model specifically designed for young people by FAW-Volkswagen, based on a deep understanding of the Chinese SUV market and user needs, and it adopts Volkswagen's new SUV design language. The T-Roc's dimensions are 4318mm in length, 1819mm in width, 1582mm in height, with a wheelbase of 2680mm.

1

3

Share

How to Replace the Battery in an EcoSport Key?

Here are the specific steps to replace the battery in a Ford EcoSport key: 1. You need to open the key; there is a gap at the position of the mechanical key. 2. Use a flat-head screwdriver to pry open the car key along the gap. 3. Once the car key is opened, you can see the internal circuit board and battery. 4. The battery model used for the Ford EcoSport is CR1632. It is important to note that when opening the key, you must avoid touching the circuit board, and you should also replace it with a similar battery model. 5. If you accidentally touch the circuit board during the battery replacement process, it may cause a short circuit. When replacing the battery, also ensure that the electrode contact points are free of dirt.

19

0

Share

How to Reset the Maintenance Light on a Nissan Murano?

Here is the method to reset the maintenance light for the Nissan Murano model: 1. With the engine off, press and hold the short-distance trip counter reset button located below the tachometer. 2. Turn the ignition switch to the ON position, then release the short-distance trip counter reset button. The display will show the 'SERVICE' indicator. 3. Pull out the minute button on the clock and turn it to the right. The odometer reading will appear on the display. 4. Turn the engine off to reset the reminder message. 5. Turn the ignition switch to the ON position again, and the 'SERVICE' indicator will disappear. 6. The 'SERVICE' indicator on the instrument panel display is a maintenance cycle reminder. When the ignition is in the ON position, the 'SERVICE' indicator will flash, and it will disappear after starting the engine, indicating that the vehicle requires maintenance. After maintenance, the maintenance light should be reset.

19

2

Share

What is the function of automotive antifreeze?

Antifreeze is a type of coolant containing special additives, primarily used in liquid-cooled engine cooling systems. It offers excellent performance in preventing freezing in winter, boiling in summer, and providing year-round protection against scale and corrosion. The method for replacing antifreeze is as follows: Before completely replacing the antifreeze, conduct a thorough inspection to check for any signs of leakage or cracks in the pipes, with a particular focus on the five-way water pipe. Antifreeze is distributed to different parts of the car through the five-way pipe to perform its function. If there is any leakage of antifreeze in this section, replace the water pipe or reseal the joints as necessary. Drain the old antifreeze, then flush the liquid channels with clean water. Add clean water to the antifreeze reservoir and continue filling until water flows continuously through the engine cooling system. Start the engine and let it idle for 3 to 5 minutes to circulate the water. Initially, the water flowing out of the reservoir may have a faint pink tint. Continue adding clean water until the outflowing water is clear. Remember to disconnect the heater hose and drain the water from the heater core. Approximately one hour after draining, add the new antifreeze through the radiator hose. Then, add another container of antifreeze to the antifreeze reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. During this time, the coolant level will drop slightly as air is expelled from the cooling system. Top up the antifreeze to the "MAXT" mark on the reservoir.

13

0

Share

What car brand has a dragonfly logo?

How to Deal with Low Tire Pressure in BMW?

Do you need to turn on the AC when using the car's cold air?

What Octane Gasoline Should the T-Roc Use?

How to Replace the Battery in an EcoSport Key?

How to Reset the Maintenance Light on a Nissan Murano?

What is the function of automotive antifreeze?

How to Fold Down the Rear Seats of a Geely Emgrand?

What type of fuel injection system does the BMW M5 engine use?

What are the dimensions of the Volkswagen Caravelle?

Is the Avalon 2.0 equipped with a purely imported engine?