What brand of tires does the Lexus ES use?

2 Answers
VanKai
07/24/25 6:47am
The original tires of the Lexus ES are from the Yokohama DB series, also known as Yokohama. There are four tire sizes available: 235/40/R19, 215/55/R17, 235/40/R19, and 235/45/R18. Yokohama Tires, founded in 1917, was formerly known as Yokohama Rubber and officially changed its name in China to Yokohama in 2008. The company has developed tire design technologies that reduce air resistance during vehicle operation. For the Lexus ES tires in daily use, the following points should be noted: Regularly check the tire surface for cracks, deformations, or other defects. Due to driving wear, the tread grooves of the tires gradually become shallow. If the tread is worn flat, it will lose its drainage and anti-skid functions, significantly reducing the vehicle's performance. Small cracks may also pose a risk of tire blowouts at high speeds. Additionally, promptly remove pebbles from the grooves. Try to park on level ground. Avoid parking on roads with thick, sharp, or pointed stones. Do not park near or in contact with petroleum products, acids, or other materials that may deteriorate rubber. After parking, the driver should avoid turning the steering wheel, as this can accelerate tire wear. Do not splash water to cool the tires. In hot weather or during high-speed driving, tires are prone to overheating, and the air pressure may increase. In such cases, stop to allow the tires to cool naturally. Do not release air to reduce pressure or splash water to cool the tires, as this can cause abnormal aging of the tread rubber. Avoid sudden braking. Try to minimize frequent use of brakes and sudden stops to prevent accelerated tread wear caused by dragging between the tires and the ground.
Was this review help?
1
2
Share
MargaretLynn
08/11/25 2:33am
I bought a Lexus ES300h last year and only noticed after driving it for half a year that the tires are Michelin brand. The original factory configuration mostly uses Michelin or Bridgestone, and my model has a size of 255/45R18. It feels very stable to drive with strong grip, especially when braking in the rain. As an ordinary car owner, I think brand choice is quite important. Michelin offers high comfort, low noise, and doesn’t tire you out on long drives. Regularly checking tire pressure and wear is key. I have a habit of using a tire pressure gauge once a month to prevent the risk of blowouts. When choosing tires, seasonal factors should also be considered. For example, if you go to mountainous areas in winter, you might need to switch to winter tires. The ES has good compatibility, and switching to Bridgestone is also a good match. During maintenance, the technician recommended checking the balance every 50,000 kilometers, which is both cost-effective and safe.
Was this review help?
13
3
Share
Expand All
More Forum Discussions

What cars start with the letter G?

G-headed cars belong to GAC Trumpchi. Taking the Trumpchi GS4 as an example, here are the specific details of the GS4: 1. Vehicle positioning: The Trumpchi GS4 is a compact SUV under GAC Motor. 2. Configuration: The 235T model is equipped with a 6-speed automatic transmission and four-wheel drive, featuring a plug-in hybrid system composed of a 1.5L Atkinson cycle engine and a G-MC electric coupling system. 3. Fuel consumption: The gasoline version of the GS4 has a fuel consumption of 6.8 liters per 100 kilometers, while the hybrid version reduces it to as low as 4.6 liters per 100 kilometers. The parts commonality rate reaches 50%, and it is also equipped with the ADiGO intelligent connectivity system and autonomous driving system.
11
5
Share

How often should the spark plugs be replaced on the Nissan Qashqai?

The spark plugs on the Nissan Qashqai should be replaced every 100,000 kilometers. The function of the spark plug is to discharge the high-voltage pulse electricity sent by the high-voltage wire, break down the air between the two electrodes of the spark plug, and generate an electric spark to ignite the mixed gas in the cylinder. The Nissan Qashqai is positioned as a compact SUV, with a body length, width, and height of 4401mm, 1837mm, and 1611mm respectively, and a wheelbase of 2646mm. In terms of power, the Qashqai is equipped with a 2.0L naturally aspirated engine, which has a maximum power output of 154 horsepower. The engine is paired with a CVT continuously variable transmission.
14
2
Share

Why does the engine shake when starting?

The reason the engine shakes when starting is due to a dirty throttle body or excessive carbon deposits on the fuel injectors. When there is too much carbon buildup inside the engine, the gasoline sprayed by the cold-start injector can be largely absorbed by the carbon deposits, resulting in an overly lean air-fuel mixture during cold starts. This makes starting difficult and causes the engine to idle roughly after a cold start. Solution: Clean the fuel system, check if the idle control valve has carbon buildup and clean it if necessary, or drive at low gear with high engine speed for a period of time to increase the engine's air intake and fuel flow, which helps remove carbon deposits from the injectors. Carbon buildup inside the engine is unavoidable, so car owners must regularly clean and inspect it.
2
2
Share

What are the dimensions of the Magotan?

New Magotan body dimensions are 4866mm in length, 1832mm in width, and 1464mm in height, with a wheelbase of 2871mm. The following is an extended introduction: Brand Introduction: The Magotan is a mid-size car launched by FAW-Volkswagen. From the side view of the car, the body dimensions are quite streamlined. Compared to the overseas version, the wheelbase has been extended by 80mm, and compared to the previous generation, the current model's wheelbase has been increased by 59mm. Configuration: The new Magotan is built on Volkswagen's latest MQB platform, which has led to changes in the car's exterior and interior design. The dashboard design of the new Magotan features a more layered appearance.
1
0
Share

How to Identify National 5 and National 6 Standards When Buying a Car?

Methods to identify whether a car meets National 5 or National 6 standards are as follows: 1. Check the vehicle conformity certificate: This clearly indicates whether the car meets National 5 or National 6 standards. The emission standard is explicitly noted on the vehicle conformity certificate. Note that this certificate is collected and archived by the vehicle management office during registration, so it's advisable to take a photo or make a copy before registration for future reference. 2. Environmental protection list: Similar to the vehicle conformity certificate, this document records the car's emission standard. By reviewing this list, you can clearly determine whether the vehicle meets National 6 standards. 3. Visit relevant query websites such as the Motor Vehicle Environmental Protection Network, and enter the vehicle identification number (VIN) and engine number to directly check the standard.
9
4
Share

What are the consequences of water entering a motorcycle engine?

The consequences of water entering a motorcycle engine are as follows: Water immersion: If the engine is not started, it will not cause irreversible damage to the engine. The main task is to clean the accumulated water inside the engine, but the cleaning extent should be considered according to the situation. A small amount of water entering the cylinder: In some cases, the engine can still be started due to the small amount of water, and the owner may not notice it. If the owner continues to drive at this time, the piston may get stuck in the cylinder, the connecting rod may bend or break, or even directly pierce the cylinder. Such an engine may require major repairs or be scrapped, leaving behind sequelae such as shaking, power loss, and malfunctions. A large amount of water entering the cylinder: This situation causes the most severe damage to the engine. The engine will be directly scrapped.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.