What brand is Rexroth?

What Causes Vibration When Braking?

Vibration when braking is caused by uneven wear of the brake discs or the use of inferior brake pads. Brakes are mechanical braking devices that can slow down the speed of a vehicle, also known as decelerators. The car's brake pedal is located below the steering wheel. Pressing the brake pedal causes the brake linkage to be pressurized and transmitted to the brake pads on the brake drum, which then clamp onto the brake disc, slowing down or stopping the vehicle. The manual brake in a car is located next to the gear shift and is connected to the brake lever. Common examples also include bicycle brakes, which rely on rod-shaped brakes fixed to the frame or disc caliper brakes to slow down. Braking is achieved through intense friction between the brake pads and the brake drum.

5

4

Share

Where is the fuel tank cap switch on the old Jetta?

The old Jetta does not have a fuel tank cap switch; it is opened with a key. The steps to open the fuel tank cap with the key are: 1. First, pry open the outer metal cover (simply pull it open by hand); 2. There is a keyhole on the inner fuel tank cap (black); 3. Insert the car key; 4. Turn it counterclockwise (to the left), then rotate the fuel tank cap counterclockwise to open it. The dimensions of the old Jetta are 4415mm in length, 1674mm in width, and 1415mm in height, with a wheelbase of 2471mm. It is a 4-door, 5-seater sedan with a 5-speed manual transmission and a top speed of 175 km/h.

7

2

Share

How to Perform Throttle Body Adaptation After Cleaning on a Camry?

Turn the key to the power-on position without starting the engine. The Camry is a model under GAC Toyota, featuring a sophisticated exterior and user-friendly functions. Let it sit for about 10 seconds, then quickly press the accelerator pedal all the way down and hold for 15 seconds before rapidly releasing it. Turn off the ignition and remove the key, then wait for approximately 15 seconds. It comes in three major series (Luxury, Sport, and Hybrid) with ten variants, all meeting China's National VI emission standards. Start the vehicle normally to complete the adaptation. The lineup is equipped with three powertrain options: TNGA 2.5L HEV, TNGA 2.5L, and TNGA 2.0L.

18

2

Share

What does the evmode button mean?

evmode stands for pure electric mode, and its function is to switch to electric mode. The evmode button is only available in hybrid vehicles. When the evmode button is pressed, only the electric mode is used, and the engine does not participate in power output. The following introduces three driving modes of hybrid vehicles: 1. EV mode: EV mode is purely electric-driven. When the battery is low, the engine automatically starts to drive and charges the battery. When the battery reaches a certain level, the engine automatically shuts off. 2. ECO mode: Through the cooperation of the engine and motor, it is environmentally friendly and fuel-efficient, providing a smooth and comfortable driving experience. 3. PWR mode: The powerful driving force brought by the dual-engine drive of the engine and motor allows for more free and dynamic driving.

16

4

Share

What are the causes of the exhaust fault light?

Maintenance personnel inquired about when the fault light came on, and the owner reported that the light automatically illuminated during normal driving without any other symptoms occurring. Solutions for the exhaust fault light: The exhaust emission control system indicator light will illuminate when the ignition switch is turned on, and it must go off after starting the engine. If the light does not go off after starting the engine, or if it lights up or flashes during driving, it indicates that there may be unstable operation in the emission control system and the exhaust gas quality exceeds the standard. Causes of the exhaust fault light: The use of inferior fuel may cause premature damage to the exhaust emission control system. Failure to replace parts regularly as required by maintenance can lead to issues. The vehicle should be tested and potential safety hazards eliminated as early as possible while it can still operate normally.

14

1

Share

What happens when a car's generator fails?

When a car's generator fails, it can result in the car being unable to charge, having too small a charging current, too large a charging current, an unstable charging current, or the generator not producing electricity at all. The car generator is the main power source of the vehicle, functioning to supply power to all electrical devices (except the starter) when the engine is running normally (above idle speed), while also charging the battery. Based on the three-phase stator winding of a standard AC generator, additional winding turns are added with lead-out terminals, and an extra set of three-phase bridge rectifiers is included. At low speeds, the output is from the original winding and the additional winding connected in series, while at higher speeds, only the original three-phase winding provides the output.

2

1

Share

What brand is Rexroth?

What Causes Vibration When Braking?

Where is the fuel tank cap switch on the old Jetta?

How to Perform Throttle Body Adaptation After Cleaning on a Camry?

What does the evmode button mean?

What are the causes of the exhaust fault light?

What happens when a car's generator fails?

Can You Still Drive with a Faulty Spark Plug?

How to turn off the daytime running lights on the Q5?

What to Do If You Can't Read When Taking the Driving Test?

How to shift to neutral in a Buick Excelle automatic transmission when the battery is dead?