What brand is outslde?

1 Answers
OMaya
07/29/25 10:51am
outslde is not a tire brand, it means the outside of the tire. It is usually a directional indicator for the installation of unidirectional or mixed pattern tires. During installation, the side marked 'outside' should be mounted on the outer side, meaning 'outside' on the tire is used to distinguish the inner and outer sides of the tire. The installation method of the tire is based on the direction of the tire tread pattern. The tread pattern is similar to an arrow shape, and during installation, the rotation direction of the tire tread arrow should be the same as the vehicle's driving direction, which applies to unidirectional tires. If the inner and outer sides of the tire are installed incorrectly, it will reduce the tire's grip, cause different resistance between the two sides of the tire, and decrease the vehicle's braking effectiveness.
Was this review help?
6
2
Share
More Forum Discussions

What is the size of the Volvo XC60 trunk?

Volvo XC60 trunk dimensions are 1025 to 1755mm in length, 1295mm in width, and 750mm in height. The Volvo XC60 is positioned as a mid-size SUV, with body dimensions of 4688mm in length, 1902mm in width, and 1658mm in height, and a wheelbase of 2865mm. In terms of the powertrain, the vehicle: 1. is equipped with a low-power version of a 2.0-liter inline 4-cylinder turbocharged engine, paired with an 8-speed automatic transmission, delivering a maximum power of 140kW and a maximum torque of 300Nm; 2. is equipped with a high-power version of a 2.0-liter inline 4-cylinder turbocharged engine, paired with an 8-speed automatic transmission, delivering a maximum power of 187kW and a maximum torque of 350Nm. For suspension, the front suspension is a double-wishbone independent suspension, and the rear suspension is a multi-link independent suspension.
16
1
Share

What are the solutions for fogging on the inside of a car's windshield?

The solutions for fogging on the inside of a car's windshield are: 1. Open both windows to allow air convection and eliminate the temperature difference on both sides of the windshield; 2. Turn on the air conditioning with cold or hot air; 3. Use a defogging agent; 4. Wipe the glass with soapy water; 5. Dry the fog with a towel. The reasons for fogging on car glass are: 1. Large temperature difference between the inside and outside of the car; 2. The window temperature is lower than the dew point temperature; 3. There is a temperature difference on both sides of the window. The maintenance methods for car glass are: 1. Use glass water according to the season; 2. Apply car glass heat insulation film. The cleaning methods for car glass are: 1. Pour water from the top of the vehicle and wipe off the dirty water with a sponge; 2. Evenly spray glass cleaner solution onto the glass with a high-pressure spray bottle; 3. Carefully dry the moisture with a soft cloth.
9
2
Share

Does a newly replaced cylinder sleeve piston for a motorcycle have a break-in period?

Motorcycle newly replaced cylinder sleeve piston does have a break-in period, it is recommended to follow the break-in standards for new motorcycles. A minimum break-in period of 800 kilometers is required. New motorcycle break-in period: The break-in mileage for a new motorcycle is approximately 1,600 kilometers. During the break-in period: 0-500 kilometers, speed should not exceed 45 km/h, and the first oil change should be done; 500-1,000 kilometers, speed should not exceed 55 km/h, and the second oil change should be done; 1,000-1,600 kilometers, speed should not exceed 80 km/h, and the third oil change should be done. After that, change the oil every 2,000-2,500 kilometers. Motorcycle break-in period precautions: During the break-in period, the maximum speed should be controlled. Generally, the driving speed should be below 60 km/h with variable speed driving. Avoid driving at the same speed for long periods; drive at different speed ranges appropriately. Try not to carry passengers or cargo during the break-in period. For vehicles with gear changes, shift gears frequently. After driving 1,000 kilometers, run at high speed appropriately under safe conditions.
1
2
Share

How to Set the Time on a 2007 Peugeot 307?

To set the time on a 2007 Peugeot 307, follow these steps: Press the MENU button on the display panel above the center console. Repeatedly press until "Display-Adjust" appears, then press OK to enter. Below is some information about the 2007 Peugeot 307: 1. The Dongfeng Peugeot 307 is an elegant and highly distinctive vehicle. Its front fascia resembles the majestic face of a lion, with the two headlights shining like the lion's eyes, exuding authority without anger—a signature feature of the Peugeot lineup. 2. From the side, the car boasts a unique and harmonious flowing silhouette. The front fender smoothly transitions into the upper body, with the curved roofline integrating seamlessly with the rear quarter windows and spoiler, naturally outlining the trunk's curved profile. The rear lights are cleverly embedded into the design. 3. In terms of performance, the Dongfeng Peugeot 307 shares the same design philosophy as other models in the series: transverse engine layout, front-wheel drive, four-wheel independent suspension, and comprehensive active and passive safety features, all reflecting thoughtful human-centric design.
1
5
Share

What are the reasons for the persistent illumination of the engine light on the Leoncino 500?

The reasons for the persistent illumination of the engine light on the Leoncino 500 include oxygen sensor failure and air flow sensor failure. Oxygen sensor failure: Generally, there are two oxygen sensors installed in a car, one before and one after the three-way catalytic converter. The front oxygen sensor is used to detect the air-fuel ratio of the engine under different working conditions, while the ECU adjusts the fuel injection amount and calculates the ignition timing based on this signal. The rear oxygen sensor primarily checks the working condition of the three-way catalytic converter. If the oxygen sensor is damaged or the sensor connector is damaged or loose, it can cause the mixture to be too lean or too rich, thereby triggering the fault light. It is necessary to visit a repair shop for troubleshooting or directly replace the sensor. Air flow sensor failure: The air flow meter converts the detected amount of inhaled air into an electrical signal and transmits it to the engine computer. Based on the optimal air-fuel ratio, the ECU indirectly determines the amount of fuel. If the air flow sensor or its circuit fails, the engine computer will not receive the correct intake air signal, making it unable to control the fuel amount properly. This can result in a mixture that is too lean or too rich, causing the engine to malfunction and sometimes accompanied by the illumination of the engine fault light. Replacing the air flow sensor with a new one will resolve the issue.
2
2
Share

What colors are available for the Changan CS75?

Changan CS75 is available in the following colors: Moonlight White, Noble Black, Titanium Gray, Crystal Silver Gray, and Scarlet Red. Taking the 2021 Changan CS75 as an example, it belongs to the compact SUV category, with body dimensions of: length 4650mm, width 1850mm, height 1715mm, a wheelbase of 2700mm, a fuel tank capacity of 58 liters, and a trunk capacity of 520 liters. The 2021 Changan CS75 is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 178PS, a maximum power of 131kW, and a maximum torque of 265Nm, paired with a 6-speed manual transmission.
4
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.