What brand is Max tire?

1 Answers
JamesLynn
07/25/25 8:45am
Max refers to MAXXIS, a premium tire brand under the Cheng Shin International Group. More information about MAXXIS tires is as follows: 1. The advantages of MAXXIS tires are excellent durability, as well as good tire grip and stability. 2. The disadvantage of MAXXIS tires is that they produce significant road noise at high speeds. Noise levels are lower at low speeds, but increase substantially as speed rises. 3. MAXXIS tires utilize innovative tread design and high-density siping technology, ensuring quiet operation while maintaining stable vehicle performance.
Was this review help?
6
4
Share
More Forum Discussions

How to Lift the Rear Seat of the New Sagitar?

The rear seat of the New Sagitar cannot be lifted; only the backrest can be folded down. The New Sagitar is a German spacious A+ class comfort sedan with a body length, width, and height of 4644mm, 1778mm, and 1482mm respectively, and a wheelbase of 2651mm. The new Sagitar is equipped with two engines: one is a 1.2-liter turbocharged engine, and the other is a 1.4-liter turbocharged engine. The 1.2-liter turbocharged engine has a maximum power of 116 horsepower and a maximum torque of 175 Nm, paired with either a 5-speed manual transmission or a 7-speed dual-clutch transmission. The 1.4-liter turbocharged engine has a maximum power of 150 horsepower and a maximum torque of 250 Nm, paired with a 7-speed dual-clutch transmission. The front suspension of the New Sagitar uses a MacPherson independent suspension, and the rear suspension uses a multi-link independent suspension.
13
0
Share

Geely Vision X3 Maintenance: Using Full Synthetic vs. Conventional Lubricants?

Geely Vision X3 maintenance requires changing the engine oil according to the viscosity recommended by the manufacturer. Use genuine engine oil with a viscosity that matches the engine's requirements. The grade must not be incorrect, as excessively high viscosity increases engine resistance and fuel consumption, while excessively low viscosity reduces sealing performance and results in insufficient power. Here is additional information: Automotive maintenance primarily includes the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, and more. The "SERVICE" indicator on the dashboard serves as a maintenance cycle reminder. When the ignition switch is in the ON position, the "SERVICE" indicator flashes, and it disappears after starting the engine, indicating that the vehicle requires maintenance. After maintenance, the service reminder light should be reset.
7
4
Share

Where is the cabin air filter located in the 2018 BMW X1?

The cabin air filter in the 2018 BMW X1 is located near the left foot area of the front passenger seat. Below are the replacement method and maintenance interval for the cabin air filter: Cabin air filter replacement method: In Volkswagen Golf models, the cabin air filter is positioned behind the glove box. After removing the glove box, you'll find the filter cover plate. Open the cover to access the filter. Pay close attention to the installation direction as indicated by the arrow markings. Cabin air filter replacement interval: The cabin air filter ensures air quality inside the vehicle, directly affecting occupants' health. It's generally recommended to replace it every 10,000-30,000 kilometers (6,000-18,000 miles). If you notice unusual odors from the AC system, replace the filter immediately.
17
5
Share

What does it mean when a car displays a faucet symbol?

When a car displays a faucet symbol, it refers to the engine status indicator light. This warning light indicates the operating condition of the vehicle's engine. During vehicle startup when the system performs self-check, this light will illuminate briefly and then turn off automatically. If the light remains illuminated, it signifies potential issues such as poor engine combustion condition, engine knocking, inferior fuel quality, or internal cylinder contamination. The engine malfunction light is controlled by the engine control unit (ECU), which essentially monitors all electronic components of the engine. Therefore, any malfunction will be displayed through this warning light. There are numerous reasons for engine warning light illumination, including but not limited to: mass airflow sensor failure, ignition coil malfunction, thermostat issues, catalytic converter problems, oxygen sensor defects, or excessive carbon buildup in the electronic throttle body.
7
4
Share

Does a Brand New Car Have Formaldehyde?

Just purchased new cars contain formaldehyde. Here is more relevant information: 1. Methods to remove formaldehyde from new cars: (1) Place adsorbent charcoal or Yeguangni materials inside the car. Charcoal not only absorbs impurities in the air but also improves air quality. Yeguangni, which is more effective, can be placed directly in the corners of the car. This method is more effective than traditional air fresheners. (2) Use fruit peels such as pomelo or orange to eliminate odors. 2. Formaldehyde removal methods: Formaldehyde removal methods refer to a series of measures including green plant adsorption, air purification, photo-oxidation, and physical ventilation. These methods decompose formaldehyde pollutants into carbon dioxide and water at room temperature and release them into the air in molecular form.
16
2
Share

What is the width of a highway lane?

On highways, the standard width for a single lane is generally 3.75 meters, with an emergency stopping lane width of 3.5 meters. The relevant regulations for lane width and toll booth width are as follows: Regulations on lane width: According to the 'Highway Engineering Technical Standards', the lane width for highways with a design speed of 120km/h is 3.75m, and the emergency stopping lane width is 3.5m. Currently, the maximum design speed for highways in China does not exceed 120km/h, so the above standards are generally adopted. Toll booth lane width: Each lane at a highway toll booth is 2.5 meters wide, with an additional width of over 3.5 meters set up when necessary. However, regardless of the highway's width, drivers must drive in the corresponding positions. Only by adhering to laws and regulations can drivers effectively prevent traffic accidents on highways.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.