What brand is grenlander tires?

2 Answers
EmmettDella
07/29/25 12:53pm
grenlander tires are a brand called Goolander, which is a product of Shandong Longyue Rubber Co., Ltd. Shandong Longyue Rubber Co., Ltd. is a professional passenger car tire production base, covering various fields including: economy passenger car tires, high-performance sports car tires, SUV tires, light truck tires, leisure trailer tires, and snow-specific passenger car tires. Car tires are one of the important components of a vehicle, directly in contact with the road surface, working together with the car suspension to mitigate the impact during driving, ensuring good ride comfort and smooth driving; ensuring good adhesion between the wheels and the road surface; improving the vehicle's traction, braking, and passing ability; and bearing the weight of the car.
Was this review help?
4
0
Share
StDelaney
08/14/25 1:42am
Grenlander is a tire brand produced by a Chinese company, specializing in winter tires and all-season tire series. I've personally used their snow tires while driving in the north, and they indeed provide strong grip on icy and snowy roads at a quite affordable price. However, as a novice car owner, I recommend everyone to be careful when choosing tires, checking whether the size matches your car and the tread depth of the tires, as too shallow treads can easily lead to skidding. Before each replacement, I always go to the shop to check the tire pressure and wheel balance to avoid affecting driving safety. By the way, they have different models, like high-performance or economy versions, and it's important to choose the right one based on the climate. Replacing them before winter arrives can prevent unexpected breakdowns on the road, as good tires greatly impact driving confidence. Don't just go by the brand; actual durability and noise levels are also worth paying attention to.
Was this review help?
4
5
Share
Expand All
More Forum Discussions

What is the power output of Tesla's mobile charger?

Tesla's mobile charger has a power output of approximately 33,000 watts. Below are the relevant Tesla models: 1. Tesla Roadster: The world's first mass-produced electric convertible sports car, manufactured by Tesla Motors based in Silicon Valley, California, USA. In February 2008, Elon Musk, one of the founders of Tesla, purchased the first Tesla Roadster. This was the first electric vehicle to use lithium-ion battery technology, capable of traveling over 320 kilometers on a single charge. The world record (501 kilometers) was set by the Roadster on October 27, 2009, at the Global Green Challenge in Australia. 2. Tesla Model S: A full-size, high-performance electric sedan manufactured by Tesla Motors, expected to go on sale in mid-2012, with its competitors directly targeting the BMW 5 Series. The car was designed by Franz von Holzhausen, who previously worked as a designer at Mazda North America. 3. Tesla Model X: On February 9, 2012, Tesla Motors in the USA unveiled the full-size all-electric SUV Model X, featuring avant-garde falcon-wing doors and powered by high-performance electric motors, achieving a 0-96 km/h acceleration time of under 5 seconds. This full-size all-electric SUV entered mass production in 2015. The Model X combines the spaciousness of an MPV, the advantages of an SUV, and the benefits of an electric vehicle. It is a high-quality vehicle built around the driver.
14
1
Share

What is the imported version of the Tiguan called?

The imported version of the Tiguan is still called the Tiguan. Here are some details about the Tiguan: 1. Performance: The TIGUAN is equipped with two industry-leading engines, the 1.8TSI and 2.0TSI, which deliver strong power and higher fuel efficiency, setting the trend for future high-efficiency, low-consumption engines. Thanks to the high-pressure direct injection technology, the 2.0TSI engine delivers a maximum power of 147kW and a maximum torque of 280Nm. More importantly, this engine reaches peak torque at just 1700rpm, combining the characteristics of small displacement with high power and low-speed high torque. The 1.8TSI engine in the TIGUAN also performs exceptionally well, reaching a peak torque of 250Nm at 1500rpm, surpassing its competitors by 25%-30%. It is the only SUV in its class that can deliver strong power right from the start. 2. Safety Features: When it comes to German cars, most people think of safety. Safety has become synonymous with German vehicles. The Volkswagen Tiguan comes standard with ESP (Electronic Stability Program), EBD (Electronic Brake-force Distribution), and ASR (Traction Control). Features like the less common EDS (Electronic Differential Lock), EPB (Electronic Parking Brake), Auto Hold function, and TPR (Tire Pressure Monitoring System) are all standard on the Tiguan, demonstrating Volkswagen's strong emphasis on safety. Front dual airbags and front side airbags ensure passenger safety, while the standard child safety locks highlight the importance placed on children's safety.
5
0
Share

What is the wading depth of the Vitara?

The maximum wading depth of the Vitara is 445mm. The wading depth of the Vitara is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when driving through waterlogged roads. Therefore, in terms of safe wading depth, the advantages of off-road vehicles and SUVs are obvious. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a benchmark when passing through waterlogged roads. If the air intake of the Vitara is below the water level during wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it will cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth should not exceed the height of the engine's air intake. The height of the engine's air intake, and thus the maximum wading depth, can also be increased by installing a snorkel. If wading is unavoidable, the following safe and correct operations should be performed: Before the vehicle enters the water, always turn off the auto start-stop function to prevent the engine from automatically restarting after stalling in the water, which could cause severe damage due to water ingestion. Assess the underwater road conditions based on the passage of preceding vehicles and choose an appropriate entry point. Observe the path taken by other vehicles and follow their tracks at low speed, avoiding sudden acceleration or deceleration. For roads prone to water accumulation, observe warning water level markers, trees, and reference points such as the wheels and doors of other vehicles to estimate the water depth before deciding whether to proceed. Know your vehicle's safe wading depth. If the water depth exceeds half the height of the tires or the engine's air intake, do not proceed. Instead, choose an alternative route.
3
2
Share

What Causes the ABS Light to Illuminate in Older Jetta Models?

ABS light illumination can occur in various states, each with different causes and solutions as outlined below: State 1: ABS warning light remains constantly illuminated (most common scenario). Cause 1: The ABS wheel speed sensor's detection area is contaminated by mud, sludge, or other debris, impairing its ability to read vehicle speed signals. This prevents the ABS control module from determining wheel speed or calculating slip ratios, thereby disabling proper brake modulation. Solution: Clean the wheel speed sensor and adjust its clearance with the tone ring to restore normal function. Cause 2: Loose wiring connections or poor contact in ABS relays causing signal interruptions. Solution: Inspect all wiring connections and resecure any loose terminals. State 2: Intermittent ABS light illumination that extinguishes during acceleration. Cause: Electrical system voltage drops below 10.5V when multiple accessories are in use. The light extinguishes as engine RPM increases voltage output. Possible culprits include insufficient system voltage supply due to poor terminal contact or grounding issues. Solution: Check battery specific gravity, charging system performance, and power supply components (voltage relays/connections). State 3: ABS light remains illuminated after engine start until ignition OFF. Cause: Poor grounding of ABS hydraulic valve body; faulty valve body wiring connections; or ABS control module failure. Solution: Loosen and retighten valve body ground screws (clean contact surfaces if necessary); inspect connector gaps; replace ABS/ASR control module if required. State 4: ABS light activates during high-speed driving. Cause: Significant discrepancy between front/rear wheel speed readings detected by ABS module; incorrect tire or wheel specifications. Solution: Verify proper tire/wheel specifications as indicated on fuel door placard or owner's manual. State 5: Random intermittent ABS light activation. Cause: Maladjusted brake light switch or internal switch contact failure. Solution: With engine running, depress brake pedal while manually pushing switch actuator rod downward, then release pedal to reset switch position; replace brake light switch if necessary. Important: Continued driving with illuminated ABS warning light is not recommended. ABS malfunction compromises wheel anti-lock capability during emergency braking, potentially causing wheel lockup, loss of vehicle control, and inability to maintain directional stability - presenting significant safety risks.
12
5
Share

What Does the Yellow Exclamation Mark in a BMW Mean?

When a yellow exclamation mark light appears on your car, it may indicate a general fault, automatic transmission fault, abnormal tire pressure, or lighting fault. Additionally, there are many other indicator lights on the car dashboard that feature an exclamation mark, such as the steering system fault indicator, brake system fault light, and windshield wiper fault indicator. Below is a detailed explanation of the exclamation mark warning lights: General Fault: A triangle with an exclamation mark inside. If this symbol lights up, it indicates a fault in the car's general performance, components, or functions. Possible causes include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, or engine oil pressure sensor failure. It is recommended to visit a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: A yellow gear with an exclamation mark inside. This is the automatic transmission fault warning light, indicating a transmission fault or transmission fluid level below the normal range. The transmission fluid should be replaced promptly. Brake System Fault: An exclamation mark inside a circle with parentheses. This represents a brake system warning, indicating a brake system malfunction or low brake fluid level. Immediate inspection of the brake system is required to avoid accidents. Tire Pressure Abnormality: An exclamation mark with a horizontal line below parentheses. This is the tire pressure monitoring warning light, which illuminates when the tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark. This is the lighting fault indicator, signaling a malfunction in one of the car's lights. Solution: Visit a 4S shop for inspection as soon as possible, or conduct a self-check, focusing on commonly used bulbs such as turn signals, fog lights, and interior lights to identify the issue. In addition, during daily vehicle use, the fault lights displayed on the dashboard are divided into two colors—yellow and red—to indicate different levels of severity: Yellow indicates a fault in the corresponding system that is not very serious. Reduce speed and proceed to a repair shop to eliminate potential safety hazards. Red indicates a very serious issue in the corresponding system. If this occurs, do not continue driving. Pull over immediately and call for professional assistance to prevent unpredictable risks to the vehicle and personal safety. It is important to note that when the car is started, all lights will illuminate as the system performs an automatic check. After the check is completed, the lights will turn off automatically. If a light does not illuminate when the ignition is turned on, remains lit continuously, or lights up while driving, it indicates a fault in the related system. In such cases, seek professional help promptly to inspect and resolve the issue for safety.
8
3
Share

What is the function of the Mercedes-Benz key placement area?

Mercedes-Benz key placement area is used for keyless start and car key recognition. Remote key: A remote key utilizes the wireless remote function of the central locking system, allowing doors to be unlocked and locked from a distance without inserting the key into the lock cylinder. When the key is awakened, it analyzes the authentication command sent by the car and transmits corresponding signals, which are encrypted to enhance security. Remote key working principle: The key first emits a weak radio wave, which is received by the car's antenna. The electronic control unit then identifies the signal code, and the system's actuator (motor or electromagnetic coil) executes the locking/unlocking action.
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.