What brand are the original speakers in the Audi Q5?

How Long Should the Interval Between Subject 2 and Subject 3 Be?

The interval between Subject 2 and Subject 3 is approximately 10-30 days. There are differences in the interval between Subjects 2, 3, and 4 for small and large vehicle driver's licenses. The common scheduling intervals for C1 and C2 small car driver's licenses are as follows: Subject 1: After the driving school submits the registration information to the vehicle management office, it usually takes 7-15 days for the review to be completed. Once approved, you can schedule Subject 1. Subject 2: You can start scheduling Subject 2 10 days after passing Subject 1. Subject 3: The driving test must be taken in order. After passing Subject 1, you must wait 20 days before scheduling Subject 2. After passing Subject 2, you must wait 10 days before scheduling Subject 3. For C2, you can schedule Subject 3 20 days after passing Subject 1. Subject 4: Subject 4 can be scheduled together with Subject 3, as Subject 4 is essentially a branch of Subject 3, but it is commonly referred to as Subject 4. Subject 3 Practice Notes: Master the lighting operations to avoid stalling. Be proficient in starting-related operations to avoid issues like stalling during startup, rolling back, or forgetting to release the handbrake. During straight-line driving, keep the steering wheel steady, maintain a proper posture, and look far ahead. Be skilled in gear shifting (upshift by listening to the engine sound, downshift by observing speed). When passing intersections, crosswalks, bus stops, etc., control speed appropriately and maintain awareness and safety. For turn signals, such as lane changes, overtaking, U-turns, or pulling over, wait at least 3 seconds before moving the steering wheel. Master pulling over within 30 cm. Subject 3 Exam Tips: Stay calm and avoid nervousness: Avoid focusing solely on the road ahead due to nervousness, which may cause you to forget to observe the surroundings. Many candidates make mistakes during turns or evasions under such tension. Therefore, during the Subject 3 test, avoid fixating on the road ahead and always observe the surroundings and rearview mirrors to prevent accidents. Familiarize yourself with the vehicle's gears: Do not overlook the basics of gear operation. Avoid instinctively looking at the gearshift when nervous, as this will result in immediate disqualification by the examiner, regardless of other performance aspects. Thus, be familiar with the gears during the Subject 3 test. Master clutch control: Especially during gear shifts, be proficient in operating the clutch pedal. React quickly to situations to leave a calm impression on the examiner, making it easier to pass the test.

5

0

Share

What engine does the Mitsubishi Grandis use?

Mitsubishi Grandis is equipped with a 2.4-liter naturally aspirated engine across the entire lineup, and the power of this engine is quite decent. Here are the specific details about the Mitsubishi Grandis: 1. The 2.4-liter naturally aspirated engine of the Mitsubishi Grandis delivers 163 horsepower and a maximum torque of 216 Nm. The engine reaches its maximum power at 6000 rpm and its maximum torque at 4000 rpm. This engine features MIVEC technology and multi-point fuel injection, and it uses an aluminum alloy cylinder head and block. The engine is paired with a 4AT transmission. 2. The Mitsubishi Grandis offers a spacious interior, as it is an MPV model. The dimensions of the Mitsubishi Grandis are 4780 mm in length, 1835 mm in width, and 1680 mm in height, with a wheelbase of 2830 mm.

19

2

Share

Where is the VIN on the vehicle license?

The VIN is located in the "Vehicle Identification Number" column on the vehicle license. The Vehicle Identification Number, abbreviated as VIN, is a unique set of 17 alphanumeric characters used to identify a vehicle's manufacturer, engine, chassis number, and other specifications. Below is additional information about the VIN: 1. The reason the VIN is printed on the vehicle license is that the VIN serves as an explanation and description of the vehicle license. It acts as the vehicle's ID card, indicating the brand and model of the car, and is the manufacturer's unique identifier for the vehicle, serving as the sole proof for vehicle information recognition. 2. Just as buying a house comes with a property deed, purchasing a vehicle comes with a motor vehicle registration certificate, which is the legal proof of vehicle ownership. It is kept by the vehicle owner and is not carried in the vehicle. It records the vehicle's details, functioning as the vehicle's household registration. 3. Therefore, as proof of property, the motor vehicle registration certificate also includes the Vehicle Identification Number. Of course, the VIN is also present on the vehicle frame, but it is usually only visible when the vehicle is in a bare-body state. This makes it impractical to view the actual VIN on a normally used vehicle.

19

4

Share

Where is the tire pressure monitoring in Golf 7?

There is a button near the gear lever that looks like the tire pressure warning button, and this button is the tire pressure monitoring button for the Golf 7. The Golf does not display the tire pressure values. It only alerts when the tire pressure of one or more tires falls below the set standard while driving. Here is some additional information: 1. The Volkswagen Golf 7 tire monitoring indicator uses ABS sensors to compare the rolling circumference and rotation speed of each wheel. If the tire pressure of one or more wheels changes, the tire pressure loss indicator in the combination instrument and the infotainment system display will issue an alert. 2. Tire pressure monitoring can be divided into two types based on installation location: external and internal. The biggest advantage of the external type is its low cost and easy installation. The disadvantages are that it is exposed and prone to theft or damage, and it is not aesthetically pleasing. The internal type is aesthetically pleasing and less prone to damage; however, the installation conditions and costs are higher, and care must be taken during tire repairs to avoid damaging the installed sensors.

15

4

Share

At What RPM Should You Shift Gears in a Car?

Common vehicles typically shift gears appropriately at 2000-3000 RPM, but the shift from first to second gear is often lower, around 2000 RPM or slightly more. Some are low-RPM engines, which can deliver relatively high torque and power at low RPMs. For such engines, shifting around 2000 RPM or even between 1500 to 1800 RPM is acceptable. It is advisable to shift gears when the car's RPM reaches the following data: 1. Start in first gear with the engine RPM around 1000-1500 and the speed at 10 km/h, then shift to second gear. 2. In second gear, press the accelerator to reach an engine RPM of around 1500-2000 and a speed of 30 km/h, then release the accelerator and shift to third gear. 3. In third gear, press the accelerator to reach an engine RPM of around 1500-2000 and a speed of 40 km/h, then release the accelerator and shift to fourth gear. 4. In fourth gear, press the accelerator to reach an engine RPM of around 1500-2000 and a speed of 50-70 km/h, then release the accelerator and shift to fifth gear. 5. In fifth gear, press the accelerator to reach an engine RPM of around 1500-3000 and a speed of 80-120 km/h. If there are more gears, continue upshifting based on the pattern and actual feel.

20

3

Share

Is it acceptable not to display the inspection compliance sticker?

2020 saw the nationwide promotion of electronic inspection labels. In provinces and cities that have implemented the digitization of annual inspection stickers, it is permissible not to display the physical inspection compliance sticker. However, in regions where electronic inspection stickers have not yet been adopted, the physical inspection compliance sticker must still be displayed. Below are the relevant details: 1. For vehicles within the first 6 years, owners are required to apply for the annual inspection sticker every two years at the vehicle management office, or they can apply online. 2. For vehicles older than 6 years but less than 10 years, the inspection frequency has been relaxed from once a year to once every two years. This means that within 10 years, only two on-site inspections are required—specifically in the 6th and 8th years—effective from November 20, 2020. 3. Vehicles older than 10 years must continue with annual inspections. 4. For vehicles older than 15 years, semi-annual inspections are required to ensure they meet roadworthiness standards.

20

4

Share

What brand are the original speakers in the Audi Q5?

How Long Should the Interval Between Subject 2 and Subject 3 Be?

What engine does the Mitsubishi Grandis use?

Where is the VIN on the vehicle license?

Where is the tire pressure monitoring in Golf 7?

At What RPM Should You Shift Gears in a Car?

Is it acceptable not to display the inspection compliance sticker?

How much does the Volkswagen Magotan weigh?

Do You Need to Turn on AC When Using Car Heater?

What Causes a Car to Fail the Exhaust Emission Test?

How to Claim Compensation for New Car Quality Issues?