What brand are the brake pads for the Changan CS75?

What is the insurance company's process for handling vehicle scrapping?

The at-fault driver (the insured) must report the incident to the insurance company within 24 hours and carefully fill out and sign the claim notice. Promptly inform the insurance company of the location of the damaged vehicle to facilitate vehicle inspection and damage assessment. Compensation for property damage requires obtaining corresponding receipts and vouchers. These documents are necessary for processing insurance claims after the vehicle is repaired and the accident case is closed.

9

0

Share

What is Section Speed Detection?

Below is a detailed explanation of section speed detection: 1. Section speed detection involves setting up two adjacent monitoring points on the same road section to calculate the average driving speed of a vehicle based on the time it takes to pass between these two points. 2. The system determines whether a vehicle has violated the speed limit based on the set speed standard for that section, and simultaneously displays real-time traffic violation information on LED screens to notify and warn offending drivers as well as other vehicles. 3. By calculating the average speed to detect speeding, section speed detection eliminates drivers' attempts to exploit loopholes, making the process more scientific and fair.

18

1

Share

Can You Change Lanes Over a Solid Line if the Vehicle Ahead Breaks Down?

If the vehicle ahead breaks down, the following vehicle can change lanes over a solid line without it being considered a traffic violation, and you can proceed normally. Solid lines on urban roads, such as center single or double solid lines, lane dividers at intersections, and the dividing lines between motor vehicle lanes and non-motor vehicle lanes, are important traffic markings designed to ensure that motor vehicles and non-motor vehicles stay in their respective lanes and drive safely. If the vehicle ahead stalls and turns on its hazard lights, causing congestion behind and prolonged stagnation, vehicles can cross the solid white line to change lanes under the premise of ensuring safety. Usually, in such cases, there will be traffic police on-site directing traffic, and you should follow their instructions. However, if there is no traffic police on-site and the situation is captured by electronic surveillance, you can request a review. Simply submit relevant evidence to clarify the situation, and after verification by the relevant staff, the ticket can be canceled without paying a fine or receiving penalty points. For penalties that cannot be revoked, it is generally recommended that the owner install a dashcam or use a mobile phone to record video as evidence, which will be more advantageous when appealing the penalty. Surveillance for lane changes over solid lines is active 24 hours a day, and images and related data are retained for one week. Lane changes over solid lines that do not result in major safety incidents are usually not captured. If a temporary license plate is used on a new car, it may be difficult for electronic surveillance to capture it clearly due to material issues. Here is an introduction to solid lines: Function: A white solid line is a type of lane divider used to separate traffic flow in the same direction. It is usually represented by white dashed lines, solid lines, or yellow dashed lines and solid lines. White solid lines are used to separate lanes in the same direction, and lane changes are not allowed on this lane. Special circumstances: Normally, lane changes over white solid lines are not allowed. However, if there is a road accident or a vehicle breakdown ahead, and the following vehicles have been stagnant for a long time, it is permissible to cross the white solid line to change lanes. Usually, in such situations, there will be traffic police on-site directing traffic, and you can change lanes according to their instructions. Consequences of violation: Crossing a white solid line is considered a violation of traffic markings and will result in a fine and 3 penalty points. If a traffic accident occurs due to crossing a white solid line, the vehicle that crossed the line will bear primary responsibility.

17

1

Share

How to Engage Reverse Gear in a Manual Transmission Car?

Here are the methods for engaging reverse gear in a manual transmission car: 1. Lift-up Type: This method is commonly used in American car models. To engage reverse gear, you need to lift the ring under the gear knob and then shift into reverse. 2. Direct Engagement Type: This method is also commonly used in American car models. The reverse gear lock in this type is located inside the transmission and usually consists of a high-tension spring. 3. Lock Button Type: Some car models have a lock button on the gear lever. To engage reverse gear, you need to press this button while shifting.

11

3

Share

Can Hill Start Assist Be Installed Aftermarket?

Below is a detailed answer to the question: 1. Generally, it can be added to automatic transmission vehicles. 2. Whether it can be installed depends on the specific vehicle model. Hill Start Assist automatically triggers when the following conditions are met, without needing to be activated: 1. The gear lever is in any position other than P (for automatic transmission models). 2. The accelerator pedal is not pressed. 3. The vehicle is stationary. 4. The parking brake is not engaged. When these basic conditions are met and the driver further presses the brake pedal while the vehicle is stopped, the system activates Hill Start Assist control.

4

1

Share

What are the requirements for motorcycle registration?

Motorcycle registration requires the following procedures: 1. Identity proof of the motor vehicle owner: including the original ID card and a copy. 2. Proof of origin of the motor vehicle, such as the purchase invoice. 3. Proof of motor vehicle whole vehicle factory qualification or import certificate for imported motor vehicles. 4. Proof of payment of vehicle purchase tax or tax exemption certificate. 5. Proof of compulsory insurance for motor vehicle traffic accident liability. 6. Proof of payment of vehicle and vessel tax or tax exemption certificate. 7. Other proofs and certificates that should be submitted during motor vehicle registration as stipulated by laws and administrative regulations.

19

5

Share

What brand are the brake pads for the Changan CS75?

What is the insurance company's process for handling vehicle scrapping?

What is Section Speed Detection?

Can You Change Lanes Over a Solid Line if the Vehicle Ahead Breaks Down?

How to Engage Reverse Gear in a Manual Transmission Car?

Can Hill Start Assist Be Installed Aftermarket?

What are the requirements for motorcycle registration?

Can National II gasoline vehicles pass annual inspection?

What are the tips for passing the S-curve in Subject 2?

What Causes Intermittent Engine Power?

How to Pay for Vehicle Insurance by Yourself?