···
Log in / Register

What aspects should be paid attention to in daily engine maintenance?

4 Answers
AriannaLee
08/27/25 6:40am
Daily engine maintenance requires attention to the following aspects: 1. Use engine oil of the appropriate quality grade and viscosity. Ensure all used oil is completely drained during oil changes. 2. Closely monitor when temporary substitute oil products are used. 3. Maintain good crankcase ventilation. Gases entering the crankcase from the combustion chamber are corrosive and can oxidize the oil, contaminating the engine. Therefore, proper crankcase ventilation is essential. 4. Change the oil regularly. All engine oils, regardless of quality, undergo chemical changes after certain mileage, which can harm the engine and cause malfunctions. Thus, oil should be changed periodically based on its condition and quality degradation.
Was this review help?
12
1
Share
DiLena
09/09/25 5:30am
Having driven for over a decade, I deeply understand that the key to engine maintenance lies in cultivating simple habits. Check the oil dipstick before starting the car every day to ensure the level and color are normal—change it immediately if it's too dark or insufficient. Replace the air filter every 20,000 kilometers; otherwise, restricted airflow will increase fuel consumption. Keep the coolant topped up at all times, especially during long summer trips, as overheating can easily cause malfunctions. Regularly take short highway drives to clear carbon deposits and allow the engine to breathe more smoothly. Use high-quality fuel to avoid carbon buildup or performance degradation from poor-quality gasoline. I also make it a habit to listen to the engine—if there are any unusual sounds, immediately check the spark plugs or belt wear. Doing these small tasks monthly can save a lot on repair costs and keep the car running smoothly for years.
Was this review help?
17
2
Share
Expand All
RileyAnn
10/23/25 6:21am
As a seasoned auto mechanic, I emphasize the importance of prevention. Change the engine oil as frequently as the manual suggests, about every 5,000 kilometers, to ensure proper lubrication and prevent wear. Replace the air filter when it gets dirty, as a clogged filter restricts airflow and reduces power. Check the cooling system for leaks and maintain proper fluid levels for effective heat dissipation. Inspect spark plugs regularly and replace them when worn to avoid ignition issues. Cracked belts are a hidden danger, so early detection and replacement are crucial. Also, pay attention to fuel quality—using higher-grade fuel reduces carbon buildup. Don’t neglect the habit of taking short trips on the highway to clear carbon deposits, as it’s vital for engine health. By sticking to these practices, you can prevent minor issues from turning into major problems, saving both money and hassle.
Was this review help?
16
5
Share
Expand All
LeLuke
12/06/25 6:44am
As a young car enthusiast, maintaining the engine focuses on optimizing performance. Changing the oil and filter is fundamental to keeping lubrication smooth. A clean air filter ensures the engine breathes freely, naturally boosting power. Regularly checking the coolant prevents overheating and avoids power loss. Taking the car on the highway periodically helps clear carbon deposits, making acceleration smoother. Using high-quality fuel reduces emissions and protects the environment. Simple maintenance can make your drive more enjoyable and fuel-efficient.
Was this review help?
12
2
Share
Expand All
More Forum Discussions

Performance Differences Between Three-Cylinder and Four-Cylinder Engines

The differences between three-cylinder and four-cylinder engines lie in aspects such as size and weight, fuel consumption, and power performance. Below are the distinctions between these two types of engines: 1. Size and Weight: Three-cylinder engines are smaller and lighter, which helps reduce the overall vehicle weight. Their compact size also saves space in the engine compartment, providing room for electrification components. This is beneficial for the overall vehicle space layout and aligns with the design philosophy of lightweight vehicle bodies, whereas four-cylinder engines are slightly bulkier. 2. Fuel Consumption: Due to their inherent structural advantages, three-cylinder engines excel in fuel consumption control. Their smaller size results in higher power density and improved thermal efficiency. The structural design of three-cylinder engines leads to lower pumping losses, and their smaller cylinder size reduces friction losses during operation, along with correspondingly lower heat dissipation losses, resulting in more noticeable fuel economy. In contrast, four-cylinder engines, regardless of displacement, have an additional cylinder, which increases fuel consumption. 3. Power Performance: Within the displacement range of 1.0L to 1.5L, three-cylinder engines, having fewer cylinders than four-cylinder engines, feature larger single-cylinder volumes at the same displacement, delivering better low-speed power. Fewer cylinders mean less mechanical friction, and increasing the number of cylinders can reduce single-cylinder efficiency. Compared to four-cylinder engines, three-cylinder engines offer quicker power response and stronger performance.
3
5
Share

What is the fuel consumption of the BYD Song Pro gasoline version?

BYD Song Pro gasoline version has a fuel consumption of 8.5 liters per 100 kilometers. Relevant information is as follows: 1. The Song Pro is a compact SUV under BYD, with a wheelbase of 2712 mm, and dimensions of 4650 mm in length, 1860 mm in width, and 1700 mm in height. 2. The BYD Song Pro is equipped with a 1.5-liter turbocharged engine across all variants. 3. The BYD Song Pro features a 1.5TI engine paired with a 6-speed automatic transmission. After a new tuning, the maximum power has been increased to 118 kW, and the maximum torque has been raised to 245 N·m, complying with the China VI B emission standards. The newly optimized wet dual-clutch transmission ensures smoother power delivery, comparable to a 6AT, with gear shifts that are almost imperceptible.
15
1
Share

What are the differences between the old and new models of GS4?

Here are the differences between the new and old models of Trumpchi GS4: 1. Styling: The new Trumpchi GS4 has modified the front face and rear of the car, adding LED light sources. 2. Body dimensions: The new Trumpchi GS4 is longer than the old model, with the same width and an increased height of 8mm. 3. Features: The new Trumpchi GS4 is equipped with the new generation of artificial intelligence system jointly developed by GAC Trumpchi and Tencent. 4. Roof design: It retains the floating roof design and offers an optional all-black roof to further enhance the sense of fashion.
7
2
Share

Can a sunroof be tinted?

Sunroofs do not require tinting as they are made of tinted glass, which already provides basic UV protection. Applying film to a sunroof increases the glass thickness, and poor installation may lead to operational issues such as difficulty in opening/closing or compromised sealing performance. Here are some key points about car sunroofs: 1. For standard sunroofs (non-panoramic), tinting is generally not recommended. These sunroofs typically already feature UV-resistant and heat-insulating glass. Additional tinting may result in unnecessary resource waste, and the altered light transmission might create an unnatural visual effect. 2. Tinting increases overall glass thickness. Improper installation can cause operational problems like difficult sunroof movement or sealing issues. 3. Panoramic sunroofs benefit from tinting due to their larger heat-absorbing surface area. These sunroofs allow 2-3 times more sunlight into the cabin, making window film advisable for temperature control. 4. Not all panoramic sunroofs are suitable for tinting. Avoid colored films if the sunroof glass is already tinted to maintain vehicle aesthetics. Similarly, sunroofs with black enamel dots should not be tinted.
7
5
Share

What are the body dimensions of the Crown?

2018 Crown's body length, width, and height are 5020*1805*1480mm, with a wheelbase of 2925mm. More details about the Crown are as follows: 1. The Crown is a mid-to-large-sized sedan under FAW Toyota Group, with the 2018 model currently on sale, complying with the China V emission standard. 2. The 2018 Crown features a front suspension of double-wishbone independent suspension and a rear suspension of multi-link independent suspension, with electric power steering. 3. The safety configurations of the 2018 Crown include: driver/passenger airbags, front side airbags, front/rear head airbags, knee airbags, passive pedestrian protection, seatbelt reminder, rear child seat interface, ABS anti-lock braking, brake force distribution, brake assist, traction control, and vehicle stability control. Auxiliary configurations include: engine start-stop technology, hill-start assist, engine immobilizer, central locking, keyless start system, keyless entry function, etc. 4. The 2018 Crown is equipped with a 2.0T engine, paired with an 8-speed automatic transmission. The 2.0T engine has a maximum output power of 173 kW, a maximum torque of 350 N·m, and a top speed of 230 km/h.
7
2
Share

Does the Driver's License Renewal Require Personal Attendance?

Personal attendance is not necessarily required. Within 90 days before the expiration of the driver's license, you can bring your ID card, driver's license, physical condition certificate, and three photos to the vehicle management office at the issuing location to fill out the "Motor Vehicle Driver's License Application Form" and submit it for the renewal process. After paying a small processing fee, you can receive your new driver's license. Relevant knowledge about the physical conditions required for applying for a driver's license: 1. Height: (1) For large passenger vehicles, tractors, city buses, large trucks, and trolleybuses, the height requirement is 155 cm or above. (2) For medium-sized passenger vehicles, the height requirement is 150 cm or above. 2. Vision: (1) For large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, large trucks, trolleybuses, or trams, the naked or corrected vision in both eyes must reach 5.0 or above on the logarithmic visual acuity chart. (2) For other vehicle types, the naked or corrected vision in both eyes must reach 4.9 or above on the logarithmic visual acuity chart. (3) For those with monocular vision impairment, if the naked or corrected vision in the right eye reaches 5.0 or above on the logarithmic visual acuity chart and the horizontal field of vision reaches 150 degrees, they can apply for a driver's license for small cars, small automatic transmission cars, low-speed trucks, three-wheeled cars, or small automatic transmission passenger cars for the disabled. 3. Color Vision: No red-green color blindness. 4. Hearing: (1) Able to distinguish the direction of sound with each ear 50 cm away from a tuning fork. (2) Those with hearing impairments who can meet the above conditions with hearing aids can apply for a driver's license for small cars or small automatic transmission cars. 5. Upper Limbs: Both thumbs must be intact, and each hand must have at least three other fingers intact with normal limb and finger movement functions. However, those with missing finger tips or a missing right thumb can apply for a driver's license for small cars or small automatic transmission cars. 6. Lower Limbs: (1) Both lower limbs must be intact with normal movement functions, and the length difference should not exceed 5 cm. However, those with a missing left lower limb or loss of movement function can apply for a driver's license for small automatic transmission cars. (2) Those with missing right lower limbs or both lower limbs, or loss of movement function but able to sit independently, can apply for a driver's license for small automatic transmission passenger cars for the disabled. 7. Trunk and Neck: No movement dysfunction.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.