What are the triggering conditions for the active braking system in the Tayron?

1 Answers
DiRosalie
07/28/25 4:03pm
The triggering conditions for the active braking system in the Tayron are as follows: 1. The active braking system will only automatically activate when the vehicle speed reaches 30km/h. The system monitors traffic conditions, especially within 6 meters in front of the vehicle, through an optical radar system installed on the windshield. When the vehicle ahead brakes, stops, or encounters other obstacles, the system first automatically increases braking force to help the driver reduce braking distance before taking action. 2. It can also adjust the steering wheel to change the vehicle's path and avoid obstacles. Of course, if the distance to the obstacle is already very close, the system will automatically apply emergency braking without requiring driver intervention.
Was this review help?
4
2
Share
More Forum Discussions

Is It Worthwhile to Trade in an Old Car for a New One?

Whether trading in an old car for a new one at a 4S dealership is cost-effective depends on the specific circumstances. The trade-in price at a 4S dealership is set according to the manufacturer's requirements, which differs from the practices of external used car dealers. There are many used car dealers, and they lack unified pricing and inspection standards for vehicles. In other words, the price offered by external used car dealers is negotiable and often much higher than the trade-in price at a 4S dealership. Of course, many people believe that trading in an old car at a 4S dealership for a new one comes with subsidies, but these subsidies are not always available. Even when they are, the amount is usually minimal, and some dealers may impose additional conditions to fulfill them. If the 4S dealership offers manufacturer subsidies, and the car is older, in average condition, or even has been involved in an accident, it is advisable to trade it in at the 4S dealership. The price difference with external used car dealers won’t be significant, and it saves time and effort by avoiding the need to shop around. If the car is simply older but in good condition, it is not recommended to trade it in at a 4S dealership. If the manufacturer does not offer subsidies, the so-called trade-in subsidy promoted by the 4S dealership is essentially using the used car's purchase price to offset part of the new car's price. In such cases, the 4S dealership's offer for the used car is usually not very high, and some even do not allow price negotiations, whereas the price from used car dealers can still be discussed. In conclusion, when considering trading in an old car for a new one at a 4S dealership, it is best to compare options from multiple sources to choose the most suitable price and minimize losses from selling or trading in the old car. If the purpose of trading in the old car at the 4S dealership is solely to avail of the subsidy, then it might be acceptable. However, if the goal is simply to exchange for a new car, it is generally not advisable, as the trade-in process can be troublesome, the price is often low, and selling the old car to a used car dealer is usually a better option.
9
5
Share

Can a pawnshop accept vehicles as collateral?

Pawnshops can accept vehicles as collateral, here are the relevant details: Business scope: The business scope of a pawnshop includes real estate pawn, motor vehicle pawn, and personal items pawn (such as gold, platinum, diamonds, luxury watches, jade, digital products, and other high-end goods), as well as consultation, appraisal, and evaluation services. Customer options: For vehicle pawn services, users only need to use their car as collateral for a loan at the pawnshop. When processing a vehicle pawn, customers can choose whether to leave the vehicle at the pawnshop or keep it based on their personal circumstances. Definition: Vehicle pawn refers to a type of loan financing business where a motor vehicle serves as collateral. The vehicle owner delivers the motor vehicle and its accompanying documents to the pawnshop, pays a certain percentage fee, and receives the loan amount.
3
4
Share

Can a C1 license drive a 7-seater vehicle?

C1 driver's license can drive a 7-seater MPV. The largest vehicle type permitted by a C1 license is a small passenger vehicle, with a strict seating capacity limit of no more than 9 people. Here are some relevant details about C1: 1. C1 is one of the driver's license codes, allowing the operation of small and micro passenger vehicles, light and micro cargo vehicles, as well as light, small, and micro special-purpose vehicles. According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," the scope of C1 license includes small and micro passenger vehicles, light and micro cargo vehicles; light, small, and micro special-purpose vehicles; and small passenger vehicles with a seating capacity of 9 or fewer. 2. Vehicles that a C1 license cannot drive: large buses, tractors, city buses, medium-sized buses, large trucks, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, light motorcycles, wheeled self-propelled machinery vehicles, trolleybuses, and trams.
11
0
Share

What Happens If You Don't Replace Spark Plugs?

If spark plugs are not replaced for a long time, it can lead to various issues such as leakage in the vehicle's ignition system, increased fuel consumption, reduced power output, and most importantly, difficulty in ignition, which affects the normal operation of the vehicle. Severe erosion of the spark plug—such as blistering at the top, damage, or melted electrodes—indicates that the spark plug is damaged and should be replaced. Methods to determine if a spark plug is damaged: Remove the spark plug and observe its appearance. The condition of the spark plug can be judged based on its color. A normal spark plug has an insulator skirt and electrodes that appear gray-white, gray-yellow, or light brown. A properly functioning spark plug has a reddish-brown insulator skirt, with an electrode gap between 0.8-0.9mm and no signs of electrode burn. If the spark plug is covered in oil or deposits but is not damaged, it can continue to be used after cleaning off the oil and deposits. If the spark plug is severely damaged—showing signs of blistering, black streaks, cracks, or melted electrodes—the cause of the damage should be identified. After troubleshooting, replace the spark plug with a new one. Additionally, if the spark plug appears black as if smoked, it indicates that the wrong heat range was selected or that the air-fuel mixture is too rich, or there is oil leakage.
15
0
Share

How to Deal with Water Vapor Inside the Car?

During winter driving, car windows are prone to forming water vapor, which can obstruct the view of the road ahead. Here are methods to eliminate water vapor inside the car: 1. Air Conditioning Defogging: Turn on the air conditioning and adjust the temperature inside the car to reduce the temperature difference between the inside and outside, thereby eliminating water vapor. 2. Defogging Spray: Use a professional defogging spray to remove water vapor from the car windows. Typically, one application remains effective for about half a month. 3. Wiping the Windows: Before driving, use a soft cloth to wipe the inside of the windows to prevent water vapor from forming while driving. 4. Opening the Windows: Open the car windows to allow air circulation between the inside and outside of the car, which can prevent water vapor from forming on the windows. 5. Dishwashing Liquid: Mix dishwashing liquid with water, soak a soft cloth in the solution, and wipe the inside of the windows to remove water vapor.
8
5
Share

What are the common engine sensors?

There are 6 common engine sensors. Here are the detailed introductions: 1. Crankshaft Position Sensor: The crankshaft position sensor is used to detect engine speed and provide crankshaft rotation angle. It is installed near the flywheel. 2. Coolant Temperature Sensor: Used to detect the temperature of the cooling system to ensure the engine operates at an appropriate temperature. It is installed on the engine water passage. 3. Intake Air Temperature Sensor: Used to detect the temperature of air entering the engine, mainly to adjust fuel injection volume. When the external temperature is too low, it increases fuel injection; when too high, it reduces fuel injection. It is installed on the intake bellows. 4. Intake Pressure Sensor: Used to determine the fuel injection pulse width and ignition advance angle of the engine. It is generally installed on the intake manifold. 5. Camshaft Position Sensor: Also known as the phase sensor, it is installed near the camshaft. 6. Oxygen Sensor: To control vehicle emissions, the ECU monitors the concentration of exhaust gases to adjust fuel injection, bringing the actual air-fuel ratio closer to the theoretical air-fuel ratio. The oxygen sensor serves this function and is usually installed on the exhaust manifold.
17
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.