How many parking spaces should I drive forward when reversing into the parking space?

[McAustin]

Drive forward 2 parking spaces when reversing into the parking space. Here is the relevant introduction: Reversing into the parking space: Reversing into the parking space is an assessment point in the driver's test, which involves maneuvering the vehicle to correctly reverse into the garage from both sides. It assesses whether the driver can correctly judge the vehicle's reversing trajectory and control the vehicle to complete the parking. Techniques: Align the rear of the car: When reversing into the parking space, try to align the rear of the car with the parking space to avoid significant steering adjustments during the reversing process. Pay attention to the distance: When the vehicle reaches a position where the left rearview mirror can see the corner of the vehicle on the left side of the parking space, you can start reversing into the parking space.

[StEzra]

As an experienced driver, I always prefer to drive forward about one and a half parking spaces when backing into a spot. For example, if the target parking space is No. 3, I'll stop near No. 4 or No. 4.5 before starting to reverse. This is because positioning the car at that point creates roughly a 45-degree angle between the car body and the target parking space, making steering smooth and effortless—allowing me to back in perfectly in one go. If I don't drive forward enough (e.g., only half a space), the reversing angle becomes too large, increasing the risk of scraping the neighboring car. On the other hand, driving too far forward (e.g., two spaces) wastes time and isn't safe. I once had a collision when I was learning to drive, and since then, I've stuck to this method. You also need to consider the size of the parking space and your vehicle—larger SUVs might need to go a bit farther, while smaller cars can stop a bit sooner. It's best to practice in an empty parking lot, using the rearview mirrors to observe, ensuring a smooth and safe reversing process.

[DelMiles]

I just bought a car not long ago, and reversing into a parking space made me very nervous. It took me several attempts to figure out the trick. Now, I drive forward about 1.5 parking spaces, meaning I start from the target parking space and drive to the next or next one and a half space. Why do I do this? A friend taught me that this ensures I don’t have to turn the steering wheel too sharply when reversing, reducing the risk of crossing the line. After trying it myself, I found it really works. If I only drive forward one space, the angle is a bit too small, making reversing difficult. Driving forward two spaces is too far and requires adjustments. I also remind myself to check the surroundings carefully to avoid hitting people or obstacles. When the garage lighting is poor, I drive a bit more to ensure safety. After practicing slowly, I found this method makes reversing as easy as playing a game.

[LeGrant]

When reversing into a parking space, driving forward 1.5 parking spots is the optimal distance. Stopping at that point provides an appropriate reversing angle to avoid sharp turns. In practice, you can stop after passing 1.5 spots from the target parking space based on the spot numbers. Additionally, consider the vehicle size - compact cars should drive forward 1.2-1.5 spots while SUVs need 1.5-2 spots. Always check the side mirrors to ensure safety in blind spots.

[OLena]

I always choose to drive forward about 1.5 parking spaces before reversing. For example, if the target parking spot is No.5, I will drive near No.6 and then reverse. This operation ensures safety and efficiency, avoiding loss of control or collision with adjacent vehicles during sharp turns. Remember to check the rearview mirror to confirm road conditions for any pedestrians or obstacles when parking. If the light is insufficient, drive a little further to ensure buffer space. Practice a few more times and it will become a habit you won't forget.

[BriellaLynn]

As someone who loves studying driving techniques, I've found that driving forward 1.5 parking spaces works best for reverse parking. The principle is that this distance creates a smooth reversing path and reduces the likelihood of sharp turns. In practice, locate your target parking spot in the row, count forward 1.5 spaces, stop there, then reverse. After several attempts, I discovered that being too close (like just passing 1 space) makes reversing difficult and increases scraping risks, while being too far (like passing 2 spaces) wastes space and reduces efficiency. Always make minor adjustments based on actual conditions - for narrow spaces, go slightly further with safety as the top priority.