What are the tips for selecting 1 out of 50 license plates?

1 Answers
JaxonFitz
07/29/25 1:25pm
Tips for selecting 1 out of 50 license plates: The 50 license plate numbers may not be displayed on a single page, usually divided into 5 pages with 10 plates each. The method is to take out your phone, note down one preferred number from each page, and after flipping through all 5 pages, choose your favorite from the noted numbers. Since the 50-to-1 selection has a time limit, car owners must value this opportunity and avoid indecision, or else they will have to queue again for the next round of selection. When selecting, it's essential to understand the selection rules clearly. Prepare three numbers in advance in order and input them on the selection machine. If all three inputted plate numbers have already been taken, you can use the approximate number query function. The selection machine will provide 6 approximate numbers based on the rules of the first number you input, and you can choose from these 6 numbers. If none of the 6 approximate numbers are selected, the machine offers a fuzzy query function. At this point, you can input a question mark in the selected digit along with the number, press the fuzzy query key, and proceed with the fuzzy query for selection. It's important to note that no more than two question marks can be used.
Was this review help?
7
4
Share
More Forum Discussions

What is a Retarder?

Retarder is used as an auxiliary device for the braking system, mainly applied to buses over 5 tons and trucks over 12 tons. For vehicles frequently operating in mountainous or hilly areas, its primary function is to enable sustained speed reduction or maintain stable speed during long downhill descents, while alleviating or eliminating the load on service brakes. Detailed information about retarders is as follows: 1. Based on different working principles, they can be classified into engine retarders, hydraulic retarders, electric turbo retarders, motor retarders, and aerodynamic retarders. 2. According to different forms of braking torque application, they can be categorized as primary retarders (acting on the front end of the transmission) and secondary retarders (acting on the rear end of the transmission).
18
2
Share

What Causes White Smoke When Starting the Engine?

Engine starting with white smoke is caused by: 1. The engine temperature being too low; 2. Incomplete combustion of some fuel, resulting in white smoke being expelled with the exhaust; 3. Water in the fuel supply system, which can cause white smoke when starting. Daily car usage precautions include: 1. Regularly check and replenish antifreeze; 2. Avoid using the windshield wipers or spray nozzles when the windshield is frozen; 3. Regularly check the battery charge; 4. Adjust tire pressure; 5. Warm up the car for about 1 minute before driving; 6. Start and drive slowly on icy roads.
5
2
Share

How many driving modes does the Mercedes-Benz E300 have?

The Mercedes-Benz E300 offers three driving modes: Standard Comfort Mode, Economy Mode, and Sport Mode. Taking the 2021 Mercedes-Benz E300 as an example, its body dimensions are: length 5078mm, width 1860mm, height 1484mm, with a wheelbase of 3079mm and a fuel tank capacity of 66 liters. The 2021 Mercedes-Benz E300 is equipped with a 2.0T turbocharged engine, delivering a maximum power of 190kW at 5800-6100 rpm and a peak torque of 370Nm, paired with a 9-speed automatic transmission.
16
4
Share

What causes the high voltage of the Chevrolet Cruze sensor?

Chevrolet Cruze sensor voltage being too high may be caused by a sensor malfunction, issues with the computer circuit board, or a faulty generator voltage regulator. Here is some relevant information: 1. A sensor is a detection device that can sense the measured information and convert the sensed information into electrical signals or other required forms of information output according to certain rules to meet the requirements of information transmission, processing, storage, display, recording, and control. 2. The functions of the sensors are as follows: (1) Intake pressure sensor: Reflects changes in the absolute pressure in the intake manifold and provides the ECU (Engine Control Unit) with a reference signal for calculating the duration of fuel injection; (2) Throttle position sensor: Measures the opening angle of the throttle and provides the ECU with a reference signal for fuel cutoff, control of the fuel/air ratio, and ignition timing correction; (3) Intake temperature sensor: Detects the intake temperature and provides the ECU with information for calculating air density; Coolant temperature sensor: Detects the temperature of the coolant and provides the ECU with engine temperature information;
10
4
Share

How Many Digits Does an Engine Number Typically Have?

Common engine numbers typically range between 7 to 8 digits. The sequencing and content of engine numbers may vary among different manufacturers. Generally, they include the engine model, production date, and a randomly assigned serial number when the engine comes off the production line. Some may also include a place-of-origin code. Engine models are identification codes assigned by engine manufacturers in accordance with relevant regulations, corporate or industry practices, and the attributes of the engine. These codes represent information such as the manufacturer, specifications, performance, features, technology, purpose, and batch of the engine, including fuel type, number of cylinders, displacement, and static braking power. Engines installed in passenger cars or multi-purpose passenger vehicles are required to display the professional manufacturer, model, and production number of the engine. It is important to note that the engine number is not the same as the engine model. The engine model refers to the specifications and size of the engine within the manufacturer's product line, and multiple engines can share the same model. The engine number, however, is a unique production identifier assigned to each individual engine, and no two engines share the same number. Structure of an Engine Number: Prefix: Includes product series codes, generation symbols, and regional or corporate codes. Manufacturers may choose appropriate letters as needed, but these must be approved and recorded by the industry standardization unit. Middle Section: Composed of symbols representing the number of cylinders, cylinder arrangement, stroke, and cylinder diameter. Suffix: Consists of symbols indicating structural and usage characteristics. Tail: Distinguishing symbols. When differentiation is needed due to improvements or other reasons within the same product series, manufacturers may select appropriate symbols. The suffix and tail can be separated by a hyphen (-).
12
2
Share

What does it mean when the car displays 'sport'?

When the car displays 'sport', it means the vehicle is in sport mode, which is designed to increase power output and deliver higher torque. Sport mode is particularly useful for climbing hills and overtaking, and it can also be used during high-speed driving. Additionally, the high engine RPM in sport mode can help clean carbon deposits from the engine. The car's gear positions include: 1. P (Park) - used when the vehicle is parked for an extended period; 2. R (Reverse) - used when reversing the vehicle; 3. N (Neutral) - used for temporary parking; 4. D (Drive) - used for forward movement or driving; 5. L (Low) - low-speed mode, used for going uphill or downhill.
11
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.