What are the tips for preventing the car from veering off course during straight-line driving?

What Causes Brake Pad Noise at Low Speeds?

Brake pads squeaking at low speeds may be due to brake pad malfunction, improper bedding-in of the brake pads, or misalignment of the brake pads. This situation requires timely repair. Detailed explanations are as follows: 1. Bedding-in period: The brake pads and rotors used in cars require a certain period of bedding-in. If newly replaced brake pads are producing noise, it might be caused by poor bedding-in between the brake pads and rotors. When braking, the noise occurs simultaneously. 2. Service life: Brake pads are consumable items that need replacement after certain usage. This depends on the vehicle's usage conditions. Generally, during normal vehicle operation, front brake pads wear faster than rear ones. The service life of front brake pads is approximately 30,000-50,000 kilometers, while rear brake pads last about 100,000-150,000 kilometers.

16

3

Share

What Type of Energy Does Hydrogen Energy Belong To?

Hydrogen energy belongs to secondary energy. Below is a detailed introduction to the main characteristics of hydrogen energy: 1. Weight and thermal conductivity: Under standard conditions, its density is 0.0899g/L, making it lightweight. Hydrogen's thermal conductivity is 10 times higher than that of most gases, giving it strong thermal conductivity. 2. Combustion performance: It has strong combustion performance. When mixed with air, its flammable range is broader. Additionally, hydrogen has a high ignition point and fast combustion speed. 3. Environmental value: Hydrogen energy is a clean energy source. Apart from producing water and a small amount of hydrogen nitride, it does not generate environmentally harmful pollutants such as carbon monoxide, lead compounds, or particulate matter. Furthermore, replacing fossil fuels with hydrogen can significantly mitigate the greenhouse effect.

15

4

Share

Why Do Batteries Leak?

Battery leakage is caused by chemical reactions occurring within the internal materials. Here is relevant knowledge about automotive battery leakage: 1. Whether battery leakage requires replacement: If the electrolyte has leaked quite severely (emptied within a short time), a new battery should be promptly installed. 2. Methods for handling battery leakage: First conduct an external inspection to locate the acid leakage area. Remove the cover to check for traces of acid leakage around the safety valve, then open the safety valve to examine whether there is flowing electrolyte inside the battery. If no abnormalities are found, perform an air-tightness test. Finally, during the charging process, observe whether any flowing electrolyte is generated. If present, it should be completely extracted.

6

0

Share

What are the body dimensions (length, width, height) of the Baojun 730?

Baojun 730's length, width, and height dimensions are 4780mm/1780mm/1740mm, which are official data. The length of the Baojun 730 refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane and touching the outermost protruding parts at the front and rear of the vehicle; the width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and touching the outermost rigid fixed protruding parts on both sides of the vehicle; the height refers to the distance between the highest point of the vehicle and the vehicle's supporting plane. The turbocharged engine of the Baojun 730 has a maximum power of 108kw and a maximum torque of 250 Nm. This engine reaches its maximum power at 5200 rpm and its maximum torque between 2200 to 3400 rpm. It features multi-point fuel injection technology within the cylinder and uses an aluminum alloy cylinder head with a cast iron cylinder block. This engine is paired with a manual transmission (MT). There are national regulations regarding vehicle dimensions. According to the national standard "GB1589-89," the total width of a vehicle does not include side mirrors. The limitation on vehicle width is to provide sufficient lateral clearance between adjacent lanes for overtaking. In other words, under national standards, the significance of vehicle width data is to ensure enough space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5m to meet the usage requirements of public roads.

7

0

Share

What is the emission standard for 2007 vehicles?

2007 vehicles comply with either China II or China III emission standards. Below are the implementation timelines for other emission standards: 1. China IV standard: Nationwide implementation began on July 1, 2010. Compared to China III, this standard upgraded the post-emission treatment system, reducing pollutant emissions by 50% to 60%. 2. China V standard: Nationwide implementation started on January 1, 2018. The China V standard imposes stricter limits on nitrogen oxides (NOx), hydrocarbons (HC), carbon monoxide (CO), and particulate matter (PM) from motor vehicles. Compared to China IV, it reduces NOx emissions by 25% and adds emission limits for non-methane hydrocarbons and PM to combat air pollution and prevent smog.

5

Share

Scope of Application for the 'One Refund Plus Triple Compensation' Policy for Vehicles

The prerequisite for the 'one refund plus triple compensation' policy for vehicles is that the seller's actions constitute fraud against the consumer. Below is relevant knowledge about the 'one refund plus triple compensation' policy for vehicles: 1. Methods for safeguarding rights: If you discover quality issues or other problems with the purchased vehicle and suspect fraudulent behavior by the seller, raise objections as early as possible and seek legal resolution. Keep all relevant contracts and receipts, and if necessary, use methods such as photography, audio, or video recording. 2. Precautions when purchasing a vehicle: (1) Verify whether the vehicle documentation matches the actual vehicle. Vehicle documentation refers to the vehicle itself, the certificate of conformity, the environmental protection certificate, and the consistency certificate. Carefully check whether the VIN and engine number on the certificate of conformity match those on the actual vehicle. (2) Check whether the actual vehicle matches the configuration of the ordered vehicle. (3) Inspect the odometer reading and maintenance records in the vehicle's onboard computer.

20

5

Share

What are the tips for preventing the car from veering off course during straight-line driving?

What Causes Brake Pad Noise at Low Speeds?

What Type of Energy Does Hydrogen Energy Belong To?

Why Do Batteries Leak?

What are the body dimensions (length, width, height) of the Baojun 730?

What is the emission standard for 2007 vehicles?

Scope of Application for the 'One Refund Plus Triple Compensation' Policy for Vehicles

Why does the car shake at high speeds?

How to Downshift in a Manual Transmission Car?

How to Start the Car When the Mazda6 Key Battery Dies?

What are the differences between National V and National VI vehicles?