What are the test items for the road driving skills test in Subject 3?

1 Answers
PaigeAnn
07/29/25 7:46pm
Subject 3 road driving skills test items include: preparation before driving, simulated lighting test, starting, driving in a straight line, gear shifting operations, changing lanes, pulling over, going straight through intersections, turning left at intersections, turning right at intersections, crossing pedestrian crossings, passing school zones, passing bus stops, meeting oncoming vehicles, overtaking, making U-turns, and night driving. Below is a related introduction to the test items: 1. Subject 1: Road traffic safety laws, regulations, and related knowledge test (Subject 1) written test, computer-based with a full score of 100, 90 or above is passing (including 90). 2. Subject 2: Field driving skills test (Subject 2) conducted on-site with a real vehicle. Results are only pass or fail. Required test items include reversing into a parking space, parallel parking, S-curve driving, right-angle turning, and hill start and stop, performed in sequence. Full score is 100, 80 or above is passing (including 80). 3. Subject 3: Road driving skills test (Subject 3) conducted on roads or simulated sites with a real vehicle. Full score is 100, passing scores are 90 or above for large buses, 80 or above for large trucks, and 70 or above for other vehicle types. 4. Subject 4: Safe and civilized driving-related knowledge test (Subject 4) written test, full score is 100, 90 or above is passing (including 90).
Was this review help?
7
3
Share
More Forum Discussions

What Are the Hazards of Power Steering Fluid Leakage?

Power steering fluid leakage can lead to heavy steering, abnormal noises, and steering wheel deviation during driving. If the leakage is severe, the steering gear may be rendered useless. If you notice small oil stains on the ground where the car is parked, it indicates that the steering gear leakage has reached a serious level and requires immediate repair at a service center. Minor oil seepage in the car's power steering system may still allow the car to be driven, but severe leakage can compromise driving safety. The causes of power steering fluid leakage include: Quality issues: If internal components of the steering gear have quality problems, repairs at a service center or 4S shop are necessary, and a new steering gear may need to be replaced if required. Aging components: If the sealing rings inside the steering gear age, oil seepage can occur, necessitating the replacement of new parts. Accidents or impacts: Damage to the steering gear due to traffic accidents or collisions can also result in fluid leakage. About the car's power steering system: The car's power steering system is a crucial component that controls the direction of the vehicle's movement, whether forward or backward. The steering systems in cars are mainly categorized into mechanical steering gears, electric power steering gears, mechanical hydraulic steering gears, and electro-hydraulic steering gears. The steering system assists drivers in achieving precise control during turns, ensuring the safety of the vehicle's operation.
1
0
Share

What does car cylinder head gasket failure mean?

Car cylinder head gasket failure refers to the burning and damage of the engine cylinder head gasket, which results in poor sealing between the engine cylinders and combustion chambers. The cylinder head gasket must be replaced when damaged, and it should also be replaced whenever the engine cylinder head is removed. The following are symptoms of cylinder head gasket failure: 1. Burn-through between two adjacent cylinders: The car lacks power, the engine runs unevenly, the exhaust pipe makes a "popping" sound, the engine speed fails to increase during rapid acceleration, the carburetor may backfire, and the exhaust pipe may exhibit explosive popping; 2. Bubbles emerging: If the burn-through occurs between the combustion chamber and water jacket, opening the radiator cap while the engine is running will reveal bubbles emerging, and in severe cases, water may spray out or be expelled from the exhaust pipe along with large amounts of white smoke.
17
4
Share

What are the causes of intermittent cooling failure in car air conditioning?

Car air conditioning intermittent cooling failure is caused by dirty condenser, lack of refrigerant, or damaged air conditioning flap. The following are specific details: 1. Types: There are three causes of intermittent cooling failure in car air conditioning: dirty condenser, lack of refrigerant, and damaged air conditioning flap. 2. Details: Dirty condenser - The purpose of cleaning the radiator and condenser is for heat dissipation. Engine cooling system issues can cause the condenser to lead to excessively high engine temperature or poor air conditioning performance. Use an air gun to clean it thoroughly. Lack of refrigerant - Car air conditioning requires refrigerant replenishment within three years. Although the air conditioning system is tightly sealed, it cannot prevent refrigerant leakage if there are minor leaks in the air conditioning pipes or condenser. Damaged air conditioning flap - The flap motor is located in the lower middle part of the instrument panel and serves as the main switch for air conditioning vents. When the air conditioning is cooling, cold air may leak out from gaps due to a damaged flap.
3
5
Share

Is Bubbled Car Film Toxic?

Bubbled car film is toxic. Here is an extended introduction: 1. Specific situation: When car film bubbles, it releases a large amount of formaldehyde. The sealed environment between the car film and the glass is compromised, allowing toxic gases to be released into the car interior. After prolonged exposure to sunlight, the formaldehyde content in the car may increase due to the presence of formaldehyde in floor mats, films, and paint coatings inside the car. Excessive formaldehyde in the car can irritate the human respiratory tract and skin mucous membranes, posing health risks, and in severe cases, may lead to leukemia and cancer. 2. Risk of accidents: Large areas of bubbled car film can obstruct the driver's view, making it difficult to judge objects in front of the vehicle, and may even lead to accidents.
5
4
Share

What does C3-16 engine oil mean?

C3-16 engine oil belongs to the category of fully synthetic oil. C3 oil has a very low TBN (Total Base Number) and is an environmentally friendly type of engine oil. Below is an introduction to engine oil: 1. Introduction: Engine oil, motor oil, or engine lubricant is a substance enhanced with additives in base oil. 2. Composition: It mainly contains anti-wear additives, detergents, dispersants, and multi-grade oil viscosity index improvers. 3. Function: Engine oil is used for lubricating internal combustion engines. The main functions of engine oil are to reduce friction and wear of moving parts, and to remove sludge (one of the functions of dispersants) and varnish (detergents) from the engine. It also neutralizes acids produced from fuel and lubricant oxidation (detergents), improves the sealing of piston rings, and cools the engine by carrying away heat from moving parts.
11
0
Share

Is a Coolant Temperature of 90 Degrees Normal?

Coolant temperature of 90 degrees is normal. For traditional engines, the normal operating temperature range for coolant is between 80-90 degrees, while for high-performance engines, it is normal for the coolant temperature to be below 105 degrees. The engine coolant temperature should not be too low or too high; it needs to be within a certain range. The normal temperature is typically indicated by the central position of the gauge at 90°C. Additional information: Below is an introduction to coolant-related content: 1. After starting the vehicle, the antifreeze temperature rises rapidly. Once the pointer reaches the central position, the heat exchange balances out, and the antifreeze temperature stops rising. Generally, it is optimal to start driving when the temperature reaches the middle position, which is one of the reasons for warming up the car before driving. 2. If the coolant level is insufficient, do not continue driving. Instead, replenish the coolant promptly. In northern regions, it is essential to use antifreeze and identify the cause of the deficiency. 3. The cooling system circulates coolant via a water pump to dissipate heat from the engine. Insufficient coolant will prevent proper circulation and heat dissipation, potentially damaging the engine.
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.