···
Log in / Register

What are the techniques for S-turns?

1 Answers
CharlieAnn
07/28/2025, 05:16 PM

S-shaped curve driving method is as follows: 1. Just entering the S-curve: When first entering the S-curve, try to keep the car in the middle of the curve. 2. In the curve: In the curve, if the left side of the car is far from the curve, turn the steering wheel to the left; if the right side is far, turn the steering wheel to the right. 3. Narrow sections: When encountering a relatively narrow section in the middle, don't panic, and don't turn the steering wheel too much, just make slight adjustments. The steering wheel turns according to the direction of the curve, and your hands will naturally follow what your eyes see. If you focus too much on the steering wheel, it's easy to cross the line. Throughout the process, try to keep the speed as slow as possible and control the speed well. If the speed is too fast, you may not react in time and easily step on the line; if the speed is too slow, the vehicle may easily stall.

Was this review help?
12
2
Share
More Forum Discussions

Where is the USB port in the Mercedes-Benz GLC?

There are a total of three USB ports in the Mercedes-Benz GLC, with two located inside the center armrest and one at the rear air conditioning vents. More details about car USB ports are as follows: Location of USB ports: The position of USB ports may vary depending on the vehicle model. Generally, car USB ports are located on the central dashboard, inside the center armrest, or near the rear air vents. Owners can refer to the vehicle's user manual to locate the USB ports inside the car. Functions of USB ports: USB ports can be used to connect a USB drive to the car, allowing the vehicle's multimedia entertainment system to play songs from the drive. They can also connect external devices like smartphones for screen mirroring or connectivity purposes. Additionally, USB ports can provide power to car dash cams.
20
5
Share

What is the most suitable engine oil for Mazda CX-4?

Mazda requires the use of 0W-20 full synthetic engine oil for maintenance of its models. The following is an introduction to engine oil: Classification of engine oil: Engine oils on the market can be simply divided into mineral oil and synthetic oil based on their base oil (vegetable oil is not considered due to its scarcity). Synthetic oils are further divided into full synthetic and semi-synthetic. Precautions for changing engine oil: For new cars under normal driving conditions, if synthetic oil is used, the oil can generally be changed every 10,000 kilometers, and sometimes even extended to 20,000 kilometers. Under "severe driving" conditions, engine wear is greater, and the requirements for engine oil are higher. Therefore, it is recommended to shorten the oil change interval to effectively protect the engine.
7
0
Share

What are the reasons for the Magotan generator not generating electricity?

There are many reasons why an alternator may not generate electricity, with the following being the most common: (1) The diodes are blown and do not function as rectifiers. (2) The brushes are stuck in the brush holder. (3) The rotor's field winding is not energized. Below is a detailed introduction to automotive diesel generators: 1. Overview: A diesel generator is a small power generation device that uses diesel or similar fuels, with a diesel engine as the prime mover to drive the generator to produce electricity. The complete unit typically consists of a diesel engine, generator, control box, fuel tank, starting and control battery, protection devices, emergency cabinet, and other components. 2. Others: A diesel generator is a combination of a diesel engine and a generator (usually an alternator) to produce electrical energy. Diesel compression-ignition engines are generally designed to run on diesel fuel, but some types are suitable for other liquid fuels or natural gas.
10
3
Share

What Are the Reasons for Rolling Back During Hill Start?

There are generally three reasons for rolling back during hill start: Handbrake not tightened enough: When parking on a slope, if the handbrake is applied but the foot brake is released, the car may roll backward. This happens because the handbrake is not tightened sufficiently. Some people tend to pull the handbrake with the same force as they would on a flat road, which is incorrect. When parking on a slope, the handbrake should be pulled tighter than on a flat road to prevent the car from rolling back. Releasing the brake too early: Rolling back during hill start occurs when the clutch is not yet at the semi-engaged position before the brake is released. Releasing the handbrake too late: If the handbrake is not released in time when reaching the semi-engagement point, it can cause the car to stall and roll back.
11
0
Share

What is the appropriate driving speed on icy roads?

When driving on snow or ice-covered roads, the maximum speed should not exceed 30 kilometers per hour. The following introduces driving techniques and precautions for driving on icy roads: Driving techniques on icy roads: When overtaking is necessary, maintain a sufficient safe distance from the vehicle being overtaken. After overtaking, do not rush to return to the original lane; instead, wait until there is enough distance between you and the following vehicle before returning to your lane. If the road surface is inclined or arched, choose to drive on flat areas or the middle of the road. If there are ruts, follow them. When the ruts are icy and shallow, drive along them. On icy roads, drive straight as much as possible and avoid frequent lane changes. Precautions: Maintain a safe distance and gently press the accelerator and brake. When driving on icy roads, it is easy to experience situations where the vehicle cannot stop or slides. Drive smoothly and maintain a distance twice the normal following distance from the vehicle ahead. Avoid following too closely and keep at least a 10-meter safety distance to detect situations early and react promptly.
16
3
Share

What grade of gasoline should the Magotan use?

Volkswagen Magotan requires 95-octane gasoline. Below are the relevant details: 1. Gasoline grade: The gasoline grade is the ratio of the actual gasoline's anti-knock performance to that of standard gasoline. The higher the grade, the stronger the anti-knock performance. Standard gasoline consists of isooctane and n-heptane. A higher grade is not necessarily better; the gasoline grade should be selected reasonably based on the engine's compression ratio. 2. Gasoline type selection: The type of gasoline to be used in the vehicle should follow the manufacturer's recommended grade. If the recommended grade is 92-octane, then 92-octane is sufficient. In emergency situations, 95-octane can be used. However, it is not recommended to use 95-octane gasoline for a long time, as prolonged use of higher-grade gasoline can also damage the engine.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.