What are the techniques for making a U-turn in Subject 3?

1 Answers
CollinMarie
07/30/25 2:04am
Here are the techniques for making a U-turn in Subject 3: 1. Technique one: Upon hearing the voice prompt "Please make a U-turn ahead," observe the road traffic conditions on both sides. 2. Technique two: Turn on the left turn signal and keep the steering wheel steady for three seconds. 3. Technique three: Once the entire vehicle enters the area with yellow dashed lines, observe the road traffic conditions on both sides again. The U-turn should be made at the yellow dashed lines; do not cross the solid lines when turning. 4. Technique four: After ensuring safety, turn the steering wheel fully to the left. 5. Technique five: After entering the straight lane, straighten the steering wheel. It is important to straighten the steering wheel in time and avoid crossing the solid lines. 6. Technique six: Turn off the left turn signal to complete the U-turn operation. After the vehicle is aligned, turn off the left turn signal, and the U-turn operation is complete.
Was this review help?
3
3
Share
More Forum Discussions

What does car LOCK mean?

Car LOCK is the switch to lock the car. The following is relevant information: 1. Car keyhole positions: There are four positions on the car keyhole, namely LOCK position, ACC position, ON position, and START position. LOCK refers to the locking position, which is also where the key is inserted and pulled out. Placing it in this position locks the steering wheel, preventing significant movement. 2. LOCK: LOCK means to lock. If the key is turned to the LOCK position, the entire car will basically lose power, and the steering wheel will be locked. At this time, the car key can also be removed.
17
3
Share

What is the solution for crankshaft seizure?

Engine crankshaft seizure repair method: 1. Disassemble the engine: Separate the crankshaft and bearing shells, remove connecting rods and pistons, disassemble piston pins, remove cylinder head assembly, and extract camshaft. 2. Inspection: Check crankshaft damage and out-of-roundness, measure cylinder bore and piston ovality, examine camshaft and bearing shell roundness. If out-of-roundness exceeds standards, machining repair or part replacement is required. 3. Final processing: Assemble the engine according to overhaul standards. After completion, measure cylinder compression, then conduct engine bench testing. After successful testing, reinstall in the vehicle.
12
1
Share

How Long Does Auto Body Panel Repair Take?

Auto body panel repair time depends on the technique. Generally, minor deformations can be fixed within half an hour. However, after panel repair, processes like painting and baking are required, which take at least two to three days. Below are some situations that require panel repair: 1. Impact-induced dents: Dents caused by impacts need panel repair. Methods like hammering or pulling can be used to fix dents on panels. 2. Warping or skewing deformation: Panels may warp or skew due to impacts, scratches, or improper use, and also require this repair method.
14
3
Share

Will Power Improve After Replacing the Air Filter?

The power will improve after replacing the air filter. The main function of the air filter is to filter the engine intake to ensure optimal fuel efficiency, and the cleanliness of the air filter directly affects the engine's lifespan. The air filter is usually located on the left side of the engine compartment, the right side of the engine compartment, or directly above the engine. The air filter can reduce air resistance, improve intake efficiency, and more efficient intake leads to more complete combustion, thereby enhancing power. If the vehicle owner frequently drives in dusty conditions, it is even more important to clean or replace the air filter promptly. If the air filter becomes clogged, resulting in insufficient air intake, it will directly manifest as a lack of power, and in severe cases, issues like cylinder scoring may occur.
1
3
Share

What are the reasons for the blower not working in the Sylphy?

Here are the reasons why the car blower is not working: 1. Poor contact: The main control switch has poor contact. 2. Wire damage: The fan motor wire is damaged. 3. Loose screw: The tightening screw between the fan motor and the fan blade is loose. 4. Short circuit: The fan capacitor is open or short-circuited. Here is extended information on how to deal with a non-working air conditioner blower: 1. Replace the switch: Use a multimeter to measure the contact resistance of the main control switch, and replace the main control switch or the fan motor coil. 2. Tighten: Fasten the tightening screw. 3. Check the capacitor: Replace it with a capacitor of the same specification.
3
4
Share

What causes the yellow warning light on the dashboard after starting the engine?

The reason for the yellow warning light on the dashboard after starting the engine is an engine malfunction that requires prompt repair. Causes of engine malfunctions include sensor issues, maintenance problems, and fuel quality problems. Sensors involved may include those for coolant temperature, crankshaft position, air flow, intake air temperature, oxygen levels, etc. When these sensors are damaged, the ECU will send a signal, causing the engine warning light to illuminate. Prolonged lack of engine maintenance can also trigger the engine warning light, so it's important to perform regular car maintenance. Additionally, vehicles require specific fuel grades. If a car consistently uses fuel that doesn't meet the recommended grade, it can lead to engine wear and trigger the warning light.
15
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.