
Here is the tutorial for resetting the maintenance light: 1. First, the vehicle needs to be turned off. 2. Press and hold the "0.0" button on the dashboard, the button location is as shown below. 3. While turning on the ignition, continue holding the "0.0" button without releasing it. 4. Afterwards, text will appear on the instrument information display, at which point we release the "0.0" button. 5. Press the "0.0" button again to confirm (press once). 6. Check if the maintenance light has been reset; if not, the process must be restarted from the beginning. Additional information: The car maintenance light is set based on the vehicle's scheduled maintenance cycle. When the vehicle reaches the mileage for maintenance, the maintenance light will illuminate to remind you to service the vehicle.

It's been almost two years since I got my Teramont, and I still remember the process of resetting the maintenance light clearly. When the light came on, I first sat in the car without starting the engine, just turning on the ignition with the key. There's a button on the right side of the steering wheel—press it a few times to enter the menu, scroll to find 'Settings' or 'Vehicle,' then select 'Maintenance.' Once you see the reset option, hold down the OK button for about 5 seconds, and the light will go off. This method works for most Teramont models and is simple enough that you don't need to visit a dealership. Don’t underestimate this little light; it reminds us to perform regular maintenance to prevent engine carbon buildup or wear. Otherwise, problems might arise later, leading to more costly repairs. After resetting it myself, I felt much more at ease and could focus better while driving.

Resetting the light on the Volkswagen Teramont is pretty straightforward: Turn the key to the ignition-on position without starting the engine, use the left-side steering wheel buttons to enter the instrument cluster menu, usually scroll to the Service or Settings section, select Reset Maintenance Info, then press and hold the OK button until the success prompt appears. Some newer models may have slightly different menu paths, so checking the manual first is advisable. The key takeaway is that this trick saves both money and time—once reset, don’t delay the actual maintenance. Changing the oil and filter helps the car last longer. I always recommend folks learn this trick; doing it once means you won’t rely on mechanics anymore.

As a new driver, I was also confused by the light at first. The reset procedure is actually quite simple: start the car without pressing the accelerator to keep the engine idling, navigate to the main menu using the steering wheel buttons, find the maintenance section, select it and hold the OK button for a moment until the light turns off. The whole process takes less than two minutes - don't let the light stay on and affect your driving visibility. After resetting, it's safer to get your car serviced.

When the light is on, it's always distracting while driving. I've tried the reset method for the Volkswagen Teramont several times. Before operating, power on the vehicle without starting the engine. Use the buttons on the steering wheel to enter the system menu, find the service settings option, select the reset item, and hold OK to confirm. Note that after resetting, promptly schedule a maintenance check for fluids and brakes to avoid minor issues turning into major repair costs. Developing this habit greatly benefits driving safety.

Normally, I reset the light during my car upkeep, and the steps are quite simple: turn the key to the power-on position, press the steering wheel button to enter the menu, scroll to find the maintenance reset option under vehicle or settings, and hold the OK button for a few seconds to complete it. Volkswagen's design is very practical. After resetting, don't forget to check the engine oil and tire pressure—these small actions extend the vehicle's lifespan. My experience is to perform this entire process every six months, and the car runs smoothly.


