What are the symptoms of a faulty controller in a car?

Where is the windshield washer fluid filler port located on the Sylphy?

The windshield washer fluid filler port on the Sylphy is located at the lower left corner of the engine compartment. The filler port is marked with a symbol resembling a windshield washer spray. Simply open the cap to add the fluid. Automotive windshield washer fluid: Windshield washer fluid, commonly referred to as glass water, is primarily composed of water, alcohol, ethylene glycol, corrosion inhibitors, and various surfactants. It can be categorized into solid and liquid forms, offering both cleaning and antifreeze properties. Most commercially available windshield washer fluids are blue in color, and their cleaning effectiveness varies. For instance, washer fluids sold in northern regions contain special antifreeze components to prevent freezing under low-temperature conditions. Precautions when adding windshield washer fluid: When adding the fluid yourself, avoid filling it to the brim. If the spray nozzles are misaligned, you can adjust their position using a needle. Steps to add windshield washer fluid: Engage the car's handbrake to prevent the vehicle from rolling while adding the fluid. Then, locate the front hood release switch on the left side of the car and ensure it can be opened. After lifting the hood, find the windshield washer fluid filler port. Add an appropriate amount of fluid, observing the fill line—avoid overfilling and stop once the fluid reaches the marked level.

19

0

Share

Why was the Baojun 310 discontinued?

Baojun 310 was discontinued mainly due to low market sales, prompting the manufacturer to halt production and eventually withdraw it from the market completely. Here are the relevant details: Baojun 310: The Baojun 310 is a compact hatchback launched by SAIC-GM-Wuling on September 8, 2016. It was equipped with a 1.2L engine paired with a 6-speed manual transmission, resulting in a generally sluggish start. In 2017, an automatic variant was introduced, featuring a 1.5L naturally aspirated engine paired with a 5-speed automated manual transmission. Reasons for declining sales: Part of the reason was the incomplete safety features of the Baojun 310, but the larger factor was the emergence of numerous entry-level compact SUVs in the market at the time. These SUVs were priced similarly to compact cars but offered better space and performance, leading more consumers to gradually opt for compact SUVs.

15

3

Share

Is Brilliance BMW a Domestic Car?

Brilliance BMW is not a domestic car. Below is an introduction to Brilliance BMW: Introduction: In March 2003, BMW Group and Brilliance China Automotive Holdings Limited signed a joint venture contract, and in July, Brilliance BMW Automotive Co., Ltd. was officially established, with its production plant located in Shenyang. Brilliance BMW Automotive Co., Ltd. is a joint venture invested by BMW Group and Brilliance China Automotive Holdings Limited, engaged in the manufacturing, sales, and after-sales service of BMW brand vehicles. Corporate Culture: "Develop yourself as you would manufacture a BMW car" is the requirement and commitment of Brilliance BMW to every employee. The comprehensive cultivation of corporate culture and employee quality is one of the company's key focuses.

13

3

Share

What is the reason for the Buick LaCrosse turn signal and audio not working?

The reason for the Buick LaCrosse turn signal and audio not working is a malfunction in the body control module (BCM). Dimensions: The LaCrosse is a mid-size 4-door 5-seater sedan under SAIC-GM-Buick, with length/width/height of 5000mm/1858mm/1497mm respectively, and a wheelbase of 2837mm. Powertrain: The 2012 LaCrosse 2.4T engine delivers maximum power of 137kW at 6200rpm, peak torque of 240Nm, with a top speed of 205km/h, paired with a 6-speed automatic transmission. Suspension: Equipped with 225/55R17 tires, featuring MacPherson strut front suspension and multi-link rear suspension.

5

1

Share

What is the fuel tank capacity of the 2013 Buick Excelle in liters?

2013 Buick Excelle has a fuel tank capacity of 60 liters, which is the officially announced data. The 2013 Buick Excelle uses 92-octane gasoline, with a fuel consumption of 6.6 to 7.6L per 100 kilometers. A full tank can cover a distance of 789 to 909 kilometers. During daily driving, it is necessary to pay attention to the remaining fuel level at all times. Generally, the fuel level is observed through the fuel gauge in the car. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments. It is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. In actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity marked by the car manufacturer is measured from the bottom of the tank to the safety limit. There is still some space from the safety limit to the tank opening, which is reserved to allow the fuel to expand when the temperature rises without overflowing. If the fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the calibrated tank capacity.

2

1

Share

What are the causes of power module failure in the Excelle?

The causes of Excelle failure are parameter abnormalities and usage faults. When the power input voltage is too high or the load is less than 10% of the rated load, the power module will fail; when the power output voltage is too low, the voltage drop of the anti-reverse diode at the input end is too large, or the input filter inductance is too high, the power module will also fail. When the above faults occur, it is necessary to go to a 4S shop for timely repair, and do not replace the power module by yourself. Introduction to power modules: A power module is a power supply that can be directly mounted on a printed circuit board. Its characteristic is that it can provide power for application-specific integrated circuits (ASIC), digital signal processors (DSP), microprocessors, memories, field-programmable gate arrays (FPGA), and other digital or analog loads. Generally, such modules are called point-of-load (POL) power supply systems or point-of-use power supply systems (PUPS). Modular power supplies are widely used in switching equipment, access equipment, mobile communications, microwave communications, optical transmission, routers and other communication fields, as well as automotive electronics, aerospace, etc. The role of power modules: Power modules are one of the voltage conversion devices. Their main function is to convert between AC and DC. In addition, they have the advantages of easy maintenance, flexible design, cost and time savings, high power, high efficiency and high reliability.

19

5

Share

What are the symptoms of a faulty controller in a car?

Where is the windshield washer fluid filler port located on the Sylphy?

Why was the Baojun 310 discontinued?

Is Brilliance BMW a Domestic Car?

What is the reason for the Buick LaCrosse turn signal and audio not working?

What is the fuel tank capacity of the 2013 Buick Excelle in liters?

What are the causes of power module failure in the Excelle?

Is Jetta part of FAW-Volkswagen or SAIC Volkswagen?

What is the fuel tank capacity of the new Santana in liters?

Is Tesla an Electric Vehicle or a Fuel Vehicle?

What is the fuel consumption of the Cruze?