What are the SUV models of Dongfeng Nissan?

How to Solve the Whitening of Car Plastics?

There are several solutions to address the whitening of car plastics: 1. Use dashboard wax: Dashboard wax is typically used for polishing instrument panels or plastic parts, making it a time-saving and labor-saving solution for whitened plastics. It is also relatively inexpensive. However, there are two drawbacks: it attracts dust and is quite oily. 2. Use coating care agents: Coating care agents can effectively treat whitened or dull plastic parts, providing excellent results. Compared to dashboard wax, the effects last longer and are more noticeable. 3. Shoe polish: For black plastic parts, black shoe polish works very well, especially for whitened areas. It provides excellent coverage and is very convenient to use—just apply it with a sponge at home. However, make sure to use black shoe polish. 4. Tar and asphalt cleaner: For wax residue, you can use a tar and asphalt cleaner to remove it, or gently wipe the area repeatedly with a towel dipped in all-purpose cleaner.

16

4

Share

Where is the engine of the Geely Binrui produced?

Geely Binrui's engine is independently produced by Geely. An engine is a machine capable of converting one form of energy into another, typically transforming chemical energy into mechanical energy. The Geely Binrui is a compact car with dimensions of 4680mm in length, 1785mm in width, and 1460mm in height, a wheelbase of 2670mm, a minimum ground clearance of 130mm, and a trunk capacity of 470 liters. The front suspension of the Geely Binrui is a MacPherson independent suspension, and the rear suspension is a torsion beam non-independent suspension. It is equipped with a 1.4T turbocharged engine, delivering a maximum power of 104kW and a maximum torque of 235Nm, paired with an 8-speed continuously variable transmission.

16

3

Share

What is the function of the Teana water pump vent?

The function of the Teana water pump vent is to exhaust high-temperature air and intake low-temperature air. Automotive engines widely use centrifugal water pumps, whose basic structure consists of components such as the water pump housing, connecting plate or pulley, water pump shaft and bearings or integrated shaft bearings, water pump impeller, and water seal device. It is a major component of the vehicle. The Teana has a length, width, and height of 4901mm, 1850mm, and 1450mm respectively, with a wheelbase of 2825mm. The front suspension of the Teana is a MacPherson strut independent suspension, and the rear suspension is a multi-link independent suspension with trapezoidal control arms. It is equipped with a 2.0L naturally aspirated engine, delivering a maximum power of 115kW and a maximum torque of 197Nm, paired with a continuously variable transmission.

9

3

Share

How many years of B2 driver's license are required to upgrade to A1?

B2 driver's license holders with more than 5 years of experience, who have not accumulated 12 penalty points in any of the last five scoring cycles prior to application, can apply to upgrade to A1. Starting from November 20, 2020, the application age range has been adjusted to 22-60 years old, and the minimum requirement for holding a large truck driver's license has been reduced from at least 5 years to 3 years. However, if during the period of holding a B1 license, the applicant has had instances such as drunk driving, failure to undergo annual inspection for three consecutive cycles, or accidents resulting in casualties, they will be ineligible to apply for an A1 license. Generally speaking, upgrading from B2 to A1 involves obtaining a passenger vehicle driver's license, which includes large passenger vehicles A1, B1, and A3. Specifically, A1 refers to large passenger vehicles that are over 6 meters in length or have a certified passenger capacity exceeding 20 people.

20

2

Share

What engine is in the 2010 Premacy?

2010 Premacy was equipped with the HA-VVT-1.6 engine model, delivering a maximum horsepower of 120 hp, maximum power of 88 KW at 6000 rpm, and maximum torque of 150 N·m. The 2010 Premacy engine was domestically produced in China. For daily maintenance of the 2010 Premacy engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional devices in the intake and exhaust systems and usage conditions; for diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's requirements; Regularly change the oil and oil filter. The quality of any grade of lubricating oil will deteriorate during use. After a certain mileage, performance degradation can cause various problems for the engine. To avoid failures, change the oil regularly based on usage conditions and maintain an appropriate oil level; As oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and oil cannot pass through, the filter may burst or the bypass valve may open, allowing dirty oil to return to the lubrication areas, accelerating engine wear and increasing internal contamination; Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. Small amounts remain suspended in the oil, while larger amounts precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear; Regularly use radiator cleaner to clean the radiator. Removing rust and scale not only ensures proper engine operation but also extends the overall lifespan of the radiator and engine.

1

2

Share

Can Driving License Subject 3 and Subject 4 Be Scheduled Together?

Driving License Subject 3 and Subject 4 cannot be scheduled together. More relevant information is as follows: 1. Scheduling Time: In the C1 license driving skills test, the scheduling of Subject 3 requires an interval of at least 20 days from the passing of Subject 1. Subject 4 is the theoretical part of Subject 3, so Subject 3 and Subject 4 are actually one test. The interval between the two subjects depends on the specific scheduling situation, and there is no mandatory interval requirement in the regulations. 2. Direct Examination: In some places, Subject 4 can be taken immediately after passing Subject 3, while in others, it cannot. The specific situation can be consulted with the driving school where you registered. 3. Examination Time: Subject 4 is the safety and civilization test of Subject 3, and both Subject 3 and Subject 4 are taken on the same day. 4. Examination Sequence: Subject 4 can only be scheduled after passing Subject 3.

19

4

Share

What are the SUV models of Dongfeng Nissan?

How to Solve the Whitening of Car Plastics?

Where is the engine of the Geely Binrui produced?

What is the function of the Teana water pump vent?

How many years of B2 driver's license are required to upgrade to A1?

What engine is in the 2010 Premacy?

Can Driving License Subject 3 and Subject 4 Be Scheduled Together?

What is the symbol for the auto start-stop function?

What grade of gasoline does the Golf 1.2T use?

Can 16-inch Rims Be Replaced with 18-inch Rims?

How to Replace the Battery in a Civic Key?