···
Log in / Register

What are the steps to start a Magotan automatic transmission car?

5 Answers
ParkerAnn
07/29/2025, 01:31 PM

Magotan automatic transmission car starting steps are: 1. Enter the vehicle and press the brake pedal; 2. Press the one-touch start button to initiate; 3. After the vehicle starts, shift the gear to D (Drive) position; 4. Release the electronic parking brake and then lift the brake pedal, the car can proceed normally. Automatic transmission typically refers to the car's automatic gear-shifting mechanism, where the automatic transmission control system selects the appropriate gear based on engine speed and load during driving, replacing the driver's subjective judgment of timing and gear-shifting operations. The Magotan is a mid-size car launched by FAW-Volkswagen, with dimensions of 4866mm in length, 1832mm in width, 1464mm in height, and a wheelbase of 2871mm.

Was this review help?
15
1
Share
AmaraLynn
08/14/2025, 04:36 AM

Starting the Magotan automatic transmission is quite straightforward, just follow these steps. Fasten your seatbelt, adjust the seat and mirrors to ensure good visibility. Firmly press the brake pedal with your right foot, press the start button to ignite, and wait until the dashboard lights up without any warning lights. Shift to the D (Drive) position, then release the electronic parking brake or manually release the handbrake. Gradually release the brake pedal, and the car will start to creep forward on its own. At this point, gently press the accelerator to speed up without being too abrupt to avoid sudden jerks. Before driving, always check that the tires are not flat and all lights are functioning properly, especially in winter when starting should be more gentle—let the engine warm up for about ten seconds before moving to protect it. After parking, don’t forget to shift to P (Park) and engage the handbrake. Remember, safety comes first; avoid rushing the start to save fuel and extend the car's lifespan.

Was this review help?
16
3
Share
Expand All
DiRyder
10/13/2025, 03:25 AM

Starting a Volkswagen Magotan with automatic transmission is very simple, even for beginners. First, sit properly, adjust the seat and rearview mirror to have a clear view behind, and fasten the seatbelt securely. Press the brake pedal firmly with your right foot, then turn the key or press the start button to ignite the engine. Shift the gear lever to the D position, release the handbrake, and gradually release the foot brake to let the car start creeping. Gently press the accelerator to move forward. It's recommended to avoid sudden acceleration when starting to prevent jerking and potential damage to the car. A small maintenance tip: regularly check the brake fluid level and ensure there are no obstacles around the car before starting. Stay patient, and with more practice, it will become smoother.

Was this review help?
9
1
Share
Expand All
VanColton
11/26/2025, 03:25 AM

Easy steps to start a Magotan automatic: Press the brake firmly to start the engine, shift to D gear, and release the handbrake. The car will move slowly when you release the brake, then gently press the accelerator to go. Before driving, check mirrors and tire pressure, and avoid sudden starts to prevent skidding.

Was this review help?
4
4
Share
Expand All
DeAndres
01/16/2026, 10:04 PM

Starting an Automatic Transmission Magotan Properly. Steadily press the brake with your right foot to ignite, shift to D gear, and release the handbrake. Release the brake and gently accelerate for a smooth start. When the engine is cold, warm it up before driving to reduce wear. After starting, check the dashboard for normal readings—make it a habit for peace of mind.

Was this review help?
9
1
Share
Expand All
More Forum Discussions

Which gear is for driving forward?

Car's forward gear is the D gear. Only when the vehicle is in the forward gear can the motor vehicle move forward. Basic information about the forward gear: D (Drive) forward gear, also known as the driving gear. In this gear, the transmission will automatically switch between 1st gear and overdrive based on speed and throttle conditions. This gear is used for normal road driving. Functions of the forward gear: Generally, many vehicles have corresponding protective measures. When the vehicle is in D gear, it cannot be started. This is to prevent some drivers from accidentally operating or misfiring, causing the vehicle to suddenly lurch forward and potentially lead to safety accidents. When the vehicle is in D gear, the engine and transmission will adjust the gear based on the current vehicle speed, without requiring the driver to intervene actively. How to use the forward gear: After getting into the car, first press the brake pedal, start the engine, do not release the brake pedal yet, shift into D gear, and then release the brake pedal. After the car starts moving, you can switch between D gear, L gear, M gear, and S gear as needed. Note that shifting should be done gently; do not use excessive force, as sometimes the harder you try, the worse the shift may be.
10
3
Share

Will changing lanes over a solid line definitely be captured by cameras?

When a vehicle changes lanes over a solid line at an intersection, it is highly likely to be captured by cameras due to their frequent shooting rate. Changing lanes over a solid line constitutes a traffic violation of disobeying prohibitory signs, punishable by a 3-point deduction and a fine. Consecutive lane changes can be determined by the vehicle's turn signals. For example, a vehicle will activate its turn signal in advance before changing lanes, indicating the intended direction of the lane change. After signaling, the driver needs to check oncoming traffic and rear vehicles before executing the lane change. Speed reduction markings are divided into longitudinal deceleration lines and transverse deceleration lines, typically installed near toll booths, exit ramps, or other areas requiring vehicles to slow down, appearing as white dashed lines. Longitudinal deceleration lines usually consist of a series of diamond-shaped dashed lines parallel to lane dividers, often placed at bridge approaches, turns, etc. Their primary function is to create a visual narrowing effect that induces a sense of pressure, prompting drivers to automatically reduce speed in designated areas. The photo enforcement system for lane changes over solid lines uses ground-pressure magnetic induction loops. Operating principle: When the front wheels pass over the induction loop on the ground, the system captures the first photo; when the rear wheels pass over the loop, it takes the second photo; when the vehicle crosses the intersection and passes over the opposite loop, the third photo is taken. This enforcement system operates 24/7, with images and related data retained for one week. Minor solid-line lane changes without major safety incidents often go undetected. Temporary license plates used on new vehicles may not be clearly captured by electronic enforcement systems due to material limitations.
13
1
Share

What are the differences between Volkswagen Polo and Golf?

Volkswagen Polo and Golf differ in their powertrain systems, design, body dimensions, and price. The Polo measures 4053mm in length, 1740mm in width, and 1449mm in height, with a wheelbase of 2564mm. The Golf measures 4259mm in length, 1799mm in width, and 1476mm in height, with a wheelbase of 2637mm. Specific details are as follows: 1. Different powertrains: The Polo is equipped with a 1.5L naturally aspirated engine paired with a 5-speed manual or Aisin 6AT transmission, while the Golf comes with a 1.6L naturally aspirated engine or a 1.4T engine with varying power outputs. 2. Different brands: Although both are from Volkswagen, the Polo is a product of Shanghai Volkswagen, whereas the Golf is a product of FAW-Volkswagen.
1
0
Share

What Causes a Lamborghini to Spontaneously Combust?

Automobile spontaneous combustion is usually caused by the following reasons: Do not place lighters, batteries, or reading glasses in the car: During high-temperature summer use, items such as disposable lighters, batteries, digital products, CDs, canned beverages, perfumes, and air fresheners can become 'hidden killers' in the car. Especially lighters, which contain large amounts of flammable substances like methane and butane in their fluid, can explode when heated and expanded to a certain extent, potentially causing a fire. Prolonged exposure to sunlight: Avoid parking the vehicle under direct sunlight for extended periods. Whenever possible, park in indoor parking lots or under shade to prevent prolonged exposure to sunlight.
13
5
Share

What Causes Air Suspension to Automatically Lower After Prolonged Parking?

The reason why air suspension automatically lowers after prolonged parking is due to a sealing failure in the vehicle's air suspension system. Vehicles equipped with air suspension may experience a slight drop in ride height when parked for extended periods, but it should not lower excessively. It is recommended to first check for air leaks in the airbags and the connected pipelines. If any faults are detected, promptly visit a 4S shop for inspection, repair, or replacement. The air suspension system is the optimal solution for achieving this goal. Based on road conditions and signals from distance sensors, the vehicle's computer determines changes in the body height. Functions of the air suspension system: Vehicles equipped with adjustable air suspension feature ground distance sensors near the front and rear wheels. The vehicle's computer uses the output signals from these sensors to detect changes in body height. It then controls the air compressor and exhaust valves to automatically compress or extend the springs, thereby adjusting the chassis ground clearance. This enhances high-speed stability and improves off-road capability on rough terrains.
6
0
Share

What is the difference between single and dual mass flywheels in Wuling Hongguang?

The differences between Wuling's dual mass flywheel (DMF) and single mass flywheel are as follows: 1. Structural difference: The DMF essentially splits the traditional solid flywheel into two parts - the primary mass (compensating for engine inertia) and the secondary mass (improving transmission inertia). These two components are connected not rigidly but through damping elastic elements (such as curved coil springs or other vibration damping components), eliminating the need for clutch plates with torsional dampers while significantly reducing engine vibration effects on vehicle propulsion. 2. Configuration advantage: Compared to conventional solid flywheel with damping clutch combinations, the DMF's larger space allows easier spring arrangement and superior damping performance, almost completely isolating engine vibrations from the transmission. This design shows particularly excellent filtering effects against unstable engine movements at low RPMs.
19
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.