What are the steps to start a car in Subject 2?

3 Answers
VanLaila
07/23/25 5:01pm
Subject 2 vehicle starting steps are as follows: 1. Walk around the car and observe the surroundings. 2. Open the door, get in, and fasten the seat belt. 3. Sound the horn, depress the clutch, and engage the gear. 4. Slowly release the clutch while simultaneously releasing the parking brake with your right hand. 5. The car begins to move, shift gears, and press the accelerator. Additional information: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment. It is the abbreviation for the field driving skills test. The test items for cars C1 and C2 include five mandatory tests: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving through curves (commonly known as S-turns). Specific explanations are as follows: 1. Reversing into a garage: Correctly judge the vehicle's reversing trajectory and control the vehicle to complete reversing into the garage. 2. Parallel parking: While moving, maneuver the vehicle to correctly park in a roadside parking space (garage) on the right side of the road. 3. Stopping and starting on a slope: Accurately judge the stopping position; coordinate the use of the accelerator pedal, parking brake, and clutch for a smooth start. 4. Driving through curves: While moving, operate the steering device to control the vehicle through curves. 5. Turning at a right angle: While moving, correctly operate the steering device and accurately judge the difference between the inner and outer wheels.
Was this review help?
16
5
Share
StJames
08/10/25 12:43pm
I remember the process of starting the car during the Subject 2 driving test very clearly. First, after getting in the car, adjust the seat so your feet can comfortably reach the clutch and brake pedals—not too close or too far, as it could affect your operation. Adjust both side mirrors to ensure you can see the position of the rear wheels, which is crucial for parallel parking. Next, fasten your seatbelt—this step must not be forgotten, or you'll lose points immediately. For a manual transmission car, press the clutch pedal all the way down with your left foot, lightly place your right foot on the brake, turn the key to start the engine, and then shift into first gear. After confirming it's safe around you, release the handbrake—this is critical, as forgetting it will prevent the car from moving and may cause it to stall. When starting, slowly release the clutch; once the car vibrates slightly, gently press the accelerator to move smoothly. Stay focused during the test and avoid nervous mistakes. I found that practicing the starting procedure repeatedly during training can reduce errors, especially on slopes to prevent rolling back—just use the half-clutch technique to control it well. Developing these habits during practice will make the test much easier. Remembering these small details can help you pass Subject 2 effortlessly.
Was this review help?
17
2
Share
Expand All
LeDonovan
09/22/25 7:02am
When it comes to starting the car for Subject 2 of the driving test, I strictly followed the procedures when learning to drive. First, adjust the seat upon getting in—too high or too low will make you uncomfortable and affect your test mindset. Adjust the rearview mirrors accurately to get a clear view behind. The seatbelt is the top priority; fasten it before doing anything else. Before starting the engine, for a manual transmission, you must fully depress the clutch, and for an automatic, press the brake. Turn the key to start, then shift into drive. Don’t rush when releasing the handbrake—check the dashboard indicators first. When starting, slowly release the clutch while gently applying the throttle to avoid jerking forward or stalling, which would be embarrassing. The test system monitors these actions for correctness, such as forgetting to release the handbrake, which will cost you points. I recommend practicing simulations repeatedly to familiarize yourself with the car and reduce mistakes. Starting may seem simple but is crucial, as it sets the tone for the subsequent test items. Pay attention to the test rules to avoid minor errors that could cost you points.
Was this review help?
9
0
Share
Expand All
More Forum Discussions

How to reset the maintenance light on an Alto?

Here are the steps to reset the maintenance light on an Alto: 1. Turn on the ignition, press the "Reset Button" and turn off the ignition. 2. Press the "Reset Button" until the clock and mileage on the dashboard completely disappear, then release the button. 3. Press the "Reset Button" again, turn on the ignition again, the maintenance reminder will flash, press the "Reset Button", wait until the maintenance reminder stops flashing, then release the button. 4. Turn on the ignition again to check if the reset was successful. Here are some precautions for using the maintenance light: 1. When the maintenance light comes on, you should schedule a maintenance service as soon as possible and avoid delaying it for too long. 2. Regular maintenance not only keeps your new Alto in good condition but also helps identify potential issues. 3. It helps prevent car malfunctions while driving, thereby improving personal safety to some extent.
12
2
Share

How to Engage Reverse Gear in Volkswagen Santana?

To engage the reverse gear in Santana, first press the gear lever downward in the neutral position, then pull it to the left and push it into the position of first gear. Precautions for engaging reverse gear in Santana: 1. Ensure the vehicle is completely stopped before shifting into reverse. Shifting into reverse without stopping the vehicle can cause significant damage to the transmission, often leading to gear grinding. The correct method is to stop the vehicle completely before shifting into reverse for backing up. 2. Fully depress the clutch when shifting into reverse. If the clutch is not fully depressed, gear grinding may occur, characterized by a prolonged, harsh grinding sound, which can wear down the gear teeth and compromise their engagement. To avoid this, always depress the clutch fully. 3. Maintain a slow speed when reversing and avoid pressing the accelerator. When reversing, especially for beginners, it's crucial to proceed slowly and avoid pressing the accelerator hard. For automatic transmission vehicles, this can easily lead to accidents. Therefore, always control the speed when reversing and avoid rushing.
20
0
Share

How many cylinders does the Mingtu engine have?

The Mingtu is equipped with a four-cylinder engine, which utilizes Korean technology and is domestically produced in Beijing. The 1.8L version of the Mingtu engine has the model number G4NB, with a maximum power output of 105 kW, maximum torque of 176 Nm, and maximum horsepower of 143. The 1.5T version has the model number G4FG, with a maximum power output of 125 kW, maximum torque of 253 Nm, and maximum horsepower of 170. For daily maintenance of the Mingtu engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional equipment of the intake and exhaust systems and usage conditions. For diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's requirements. Regularly change the engine oil and oil filter. The quality of any grade of lubricating oil will degrade over time. After a certain mileage, its performance deteriorates, leading to various engine problems. To avoid malfunctions, change the oil regularly based on usage conditions and maintain an appropriate oil level. As oil passes through the fine pores of the filter, solid particles and viscous substances accumulate in the filter. If the filter becomes clogged and oil cannot pass through, it may rupture the filter or open the safety valve, allowing dirty oil to bypass the filter and return to the lubrication system, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls. These mix with metal particles from component wear to form sludge. In small amounts, the sludge remains suspended in the oil, but in large quantities, it precipitates, clogging filters and oil passages, making lubrication difficult and causing wear. Periodically use a radiator cleaner to flush the radiator. Removing rust and scale deposits not only ensures the engine operates properly but also extends the overall lifespan of the radiator and engine.
9
0
Share

What Causes Car Shaking and Engine Warning Light to Illuminate?

When the engine warning light comes on accompanied by vehicle shaking, the cause is typically poor combustion of the air-fuel mixture. Incomplete combustion leads to carbon buildup in the engine - the primary reason for vehicle vibration. Additionally, when oxygen sensors detect this combustion issue and report it to the ECU, the system triggers the warning light. This explains why these two symptoms often occur simultaneously. Several components can cause poor mixture combustion including faulty spark plugs, defective ignition coils, malfunctioning fuel pumps, or clogged fuel lines. When the engine warning light illuminates, follow these steps: First, check whether the engine is operating normally. Look for symptoms like shaking, black smoke emission, or difficulty starting. If present, avoid restarting the engine - this is especially critical when the red warning light is on. If the engine runs normally and the vehicle remains drivable, visit a service station promptly. Technicians can easily retrieve trouble codes using a portable diagnostic tool to identify and address specific issues. For normally functioning engines, owners may attempt gently reseating all wiring harness connectors (as loose connections could be the culprit) or repeatedly turning the ignition to ON position to potentially reset the system.
16
4
Share

Will the Fan Run if the Thermostat is Broken?

The thermostat controls the operation of the cooling fan. If the thermostat is broken, it cannot control the fan. Methods to determine if the thermostat is functioning properly: 1. Inspection after starting the engine: Open the filler cap of the cooling water tank and observe if there is any water flow inside. If there is no flow, it indicates that the thermostat is damaged or there is debris stuck between the main valve and its switch. 2. Judging by feeling the temperature of the upper and lower radiator hoses: Start the engine and after 3 minutes, touch the upper and lower hoses. If the thermostat is working properly, the temperatures of the upper and lower hoses will differ—generally, the upper hose will be hot while the lower one will be cool. When the engine coolant temperature reaches 90°C, both hoses should become hot, indicating the thermostat is functioning correctly. If the temperatures of the upper and lower hoses remain the same after starting the engine, the thermostat is not working properly.
9
0
Share

What is the transmission oil model for Volkswagen Polo?

The Volkswagen Polo is equipped with Aisin's 5-speed manual transmission and 6AT automatic transmission respectively. The manual transmission oil is the original FAW-Volkswagen transmission oil with the part number G060726A2, imported from Germany, with each bottle being 1L. The automatic transmission uses Mobil ATF3309 automatic transmission fluid, also in 1L bottles. Transmissions can be divided into automatic and manual types, and the frequency of oil changes varies accordingly. Problems may arise if the transmission oil is not changed for an extended period. The maintenance methods for transmissions are as follows: 1. For automatic transmission vehicles, regularly check the quantity and quality of the automatic transmission fluid, typically performing maintenance every 20,000 to 30,000 kilometers; use dedicated automatic transmission fluid (i.e., ATF fluid). 2. While driving, monitor the dashboard for any warning lights. If the transmission warning light flashes, it indicates a fault detected by the computer, which may manifest as difficulty starting, failure to shift gears, or inability to reach high speeds. In such cases, avoid long-distance driving and immediately contact a professional automatic transmission repair center for inspection. 3. Regularly clean external components such as the radiator and heat sink to ensure better ventilation and cooling, preventing high temperatures from damaging internal transmission components.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.