What are the steps for removing and installing the cooling fan on a Geely Boyue?

How to Replace the Complete Car Lock for BYD L3?

Here is the method for replacing the complete car lock for BYD L3: 1. Clear the original key code. 2. Register the new key code. 3. Perform remote matching to complete the replacement. Below are daily precautions for car key usage: 1. Every time you exit the car, even if it's just for a few minutes, turn off the engine, remove the key, and lock the car to prevent giving thieves an opportunity. 2. Car keys should be kept waterproof, protected from severe vibrations, and kept away from magnetic interference. If the key is damaged, it also needs to be replaced. 3. Keep the spare key and the main key separate. Do not lock the spare key inside the car, especially for vehicles with one-button start or engine immobilizers, as the spare key can fully start the engine. 4. If the key is lost and cannot be matched in time, do not leave valuables in the car. Additionally, consult your insurance company about the details of compensation for vehicle theft to ensure you have the necessary evidence in case the vehicle is stolen.

1

Share

Is it illegal to use high beams on the highway?

Normally, using high beams on the highway is not illegal. When driving on highways without streetlights, high beams can be used to expand the driver's field of vision and avoid potential hazards. However, when encountering oncoming vehicles, it is important to switch to low beams, as high beams can dazzle the driver of the vehicle ahead, compromising road safety. Below are the correct methods for using high beams: 1. When following another vehicle, to avoid affecting the driver ahead, turn off the high beams and maintain a sufficient distance; 2. When preparing to overtake, turn off the high beams and use the overtaking signal lights to alert the vehicle ahead. After completing the overtaking maneuver, you can switch back to the original lane and resume using high beams; 3. When entering a toll station or service area, reduce speed and turn off the high beams; 4. When passing through ramp intersections, turn off the high beams, and avoid using high beams during continuous turns. Please drive at a reduced speed.

6

0

Share

How to Turn on the Air Conditioning in Geely Emgrand?

Geely Emgrand's air conditioning control area is located in the middle of the center console. Press the "A/C" button in the air conditioning control area to turn on the air conditioning compressor for cooling. Here are some related introductions about the air conditioning: 1. After turning on the air conditioning system in the Emgrand, the LCD display area can show the temperature. The "AUTO" button represents the automatic temperature control function; pressing it enables automatic temperature regulation. 2. The knob on the right is for adjusting the air conditioning temperature—turning it clockwise increases the temperature, while turning it counterclockwise decreases it. The knob on the left adjusts the air volume. 3. The "MODE" button controls the position of the air vents on the console. The air conditioning area also allows you to switch between internal and external air circulation. To turn off the air conditioning, simply press the "OFF" button.

3

Share

What is the fuel tank capacity of the Highlander?

The Highlander currently has 9 models on sale. The fuel tank capacity for all 2.5L versions is 65 liters, while for all 2.0T versions it is 72.5 liters. This data is officially released, and Highlander owners can also check it on their vehicle's configuration sheet. All 2.5L Highlander models use 92-octane fuel, with a fuel consumption of 5.3 to 5.8 liters per 100 kilometers. A full tank can cover a range of 1,120 to 1,223 kilometers. All 2.0T Highlander models use 95-octane fuel, with a fuel consumption of 8.9 liters per 100 kilometers, allowing a range of 814 kilometers on a full tank. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is usually done by observing the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. Typically, the fuel gauge has 5 to 6 segments. It is advisable to refuel when only 2 segments remain to avoid running out of fuel mid-journey. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the manufacturer's specified tank capacity is measured from the bottom of the tank to the safe limit. There is additional space from the safe limit to the tank opening, which allows for fuel expansion due to temperature increases without causing overflow. If fuel is filled up to the tank opening during refueling, the actual amount may exceed the marked capacity.

19

0

Share

What should you do if your vehicle catches fire while driving?

If your vehicle catches fire while driving, here are the correct steps to take: 1. If you notice flames or black smoke coming from the front of the vehicle while driving, immediately pull over to the side of the road and turn off the engine. Cutting the power supply quickly disconnects the fuel pump, reducing gasoline combustion. 2. After turning off the power, quickly exit the burning vehicle. 3. If you have a car fire extinguisher with you, use it immediately to assess the fire situation. If the fire is under the hood, do not open it abruptly. Instead, slightly lift the hood to allow a small amount of oxygen in, wait a moment, and then slowly open it fully to use the extinguisher. Opening the hood suddenly can cause a rush of oxygen, making the flames flare up and potentially causing burns. 4. When using the fire extinguisher, aim at the fuel tank and the burning areas to cool and extinguish the fire, preventing an explosion. At the same time, call 119 for emergency assistance.

5

Share

How to Replace Car Antifreeze?

Here are the steps for replacing antifreeze: 1. Let the vehicle sit for half an hour before replacing the antifreeze to prevent burns from hot antifreeze. The drain plug for the antifreeze is located at the bottom of the radiator; find and loosen it to allow the old antifreeze to completely drain out. 2. Put the vehicle in neutral and run it while pouring clean water into the antifreeze reservoir to flush out any remaining antifreeze in the cooling system. When the water coming out of the drain is mostly colorless, it means the old antifreeze has been completely removed. 3. When the water stops flowing out, reinstall the drain plug and turn off the engine. Then, fill the reservoir with new antifreeze up to between the MIN and MAX marks. If you add a little extra, it won’t cause any adverse effects. Start the vehicle, as the air in the cooling system will be expelled during idle operation, causing the antifreeze level to drop slightly. Wait a few minutes until the antifreeze level stabilizes, then add more antifreeze to bring it back between the two marks. The antifreeze replacement process is now complete.

10

0

Share

What are the steps for removing and installing the cooling fan on a Geely Boyue?

How to Replace the Complete Car Lock for BYD L3?

Is it illegal to use high beams on the highway?

How to Turn on the Air Conditioning in Geely Emgrand?

What is the fuel tank capacity of the Highlander?

What should you do if your vehicle catches fire while driving?

How to Replace Car Antifreeze?

What to Do If the Vehicle Annual Inspection Sticker Is Lost?

How to adjust the fog lights on the Mazda3 Axela?

What is the Difference Between Power and Horsepower in Cars?

How much transmission oil should be added for Mercedes-Benz C200L?