···
Log in / Register

What are the steps for parallel parking in Subject 2?

6Answers
DiEvangeline
09/03/2025, 03:44:56 AM

The steps for parallel parking in Subject 2 are as follows: 1. Distance: Maintain approximately half a meter distance from the vehicle in front of the target parking space, keeping consistent spacing both front and rear. 2. Rearview mirror position: Adjust the rearview mirror slightly downward until you can see your vehicle's rear wheels in the middle of the mirror. 3. Reversing: Control the vehicle and slowly reverse in a straight line until your side mirror aligns with the driver's seat of the right-side vehicle, then stop. 4. Steering: Turn the steering wheel fully to the right and continue reversing slowly until your car forms a 45-degree angle with the parking space, then stop. 5. Change steering direction: Turn the steering wheel fully to the left and continue reversing until your vehicle becomes parallel with the parking space. 6. Final adjustment: Straighten the wheels and fine-tune the distance and alignment with the front vehicle.

Was this review help?
108
Share
DiNora
09/15/2025, 10:20:42 PM

When I was learning the second subject of driving, parallel parking was the most challenging part, but the steps taught by my instructor helped me overcome it. First, drive the car alongside the parking space, keeping the car body parallel to the parking line with a distance of about 30 centimeters, and align using the right reference point. Then, shift into reverse gear and slowly back up, observing the right rearview mirror. When you see the right rear corner of the parking space, quickly turn the steering wheel to the right. After the car angles into the space, pay attention to the left rearview mirror. When the rear of the car approaches the left corner of the parking space, turn the steering wheel back to the left to adjust the direction. Once the car is parallel to the parking space, stop and engage the handbrake, ensuring the wheels do not cross the line. During practice, I found that controlling speed is crucial—too fast and you might turn the wheel too early, causing misalignment, while too slow risks exceeding the time limit. Before the test, adjusting the seat and mirrors properly and staying relaxed mentally are more important. I practiced dozens of times before finding the right reference points, and the marked points in the test area were a great help. Looking back now, although the process was tough, it was worth it.

Was this review help?
13
Share
Expand All
LaMartin
10/29/2025, 10:54:02 PM

My friend was taking the driving test for Subject 2, and we talked about the steps for parallel parking. I remember it quite clearly: First, drive the car toward the front of the target parking space, aligning the front of the car with or slightly beyond the space, then stop to confirm the position. Next, start reversing while watching the right-side mirror. When the rear wheel approaches the corner of the parking space, quickly turn the steering wheel all the way to the right. Once the car is at an angle inside the space, observe the left-side mirror. When the rear of the car is about to touch the left side of the space, turn the steering wheel back to the left to adjust. After the car is parallel and parked steadily, pull up the handbrake and check to ensure you don't cross the edge lines. The key during practice is to go slow, release the clutch gently, and avoid rushing. A common mistake is turning the steering wheel too quickly, causing the car to tilt and cross the line. The marked lines in the test area are very practical—practice a few times to get the feel. I suggest practicing more with buddies in real scenarios and sharing tips. Like me, I failed my first attempt due to impatience, but passing later with a calm approach felt amazing.

Was this review help?
6
Share
Expand All
OJaxson
12/12/2025, 10:02:07 PM

The steps for parallel parking are not too complicated: First, drive slowly towards the parking space while maintaining an appropriate distance, then reverse while checking the right side mirror. Once the rear wheel aligns with the right corner of the parking space, immediately turn the steering wheel fully to the right. Next, as the car enters the parking space at an angle, pay attention to the left side mirror—when you see the left corner of the parking space, turn the steering wheel back to the left to straighten the car, then adjust to align parallel and pull the handbrake. The entire process should involve reversing at a steady speed, and the clutch should be controlled smoothly to avoid sudden movements, which could lead to crossing lines or scraping. During practice, focus more on the angle of the mirrors and reference points. A common mistake during tests is getting too nervous and turning the wheel too early. Remember, the test area has specific markers, and repeated practice is necessary to memorize these points accurately.

Was this review help?
13
Share
Expand All
OOmar
02/01/2026, 11:08:53 PM

I passed the parallel parking test in Subject 2 on my third attempt, learning some hard lessons: The steps are to first drive alongside the parking space to adjust the distance, then reverse while watching the right rearview mirror. When the right rear corner of the parking space becomes visible, turn the steering wheel fully to the right. After the car enters diagonally, before seeing the left corner of the space in the left rearview mirror, turn the steering wheel back to the left to straighten and adjust. Once parked, pull the handbrake and confirm the front and rear positions don't cross the lines. On my first try, I got stuck because I turned the wheel too late. During practice, it's essential to simulate test conditions and find suitable reference points like ground markings. Controlling speed is crucial—release the clutch slowly and don't rush. I recommend practicing with an empty car first before trying with a real one to avoid panic-induced mistakes. Looking back, staying calm would have helped me pass earlier.

Was this review help?
20
Share
Expand All
OStephanie
04/27/2026, 04:05:39 PM

Taking the parallel parking test in Subject 2 is like playing a puzzle game! Here are the steps: Drive slowly alongside the parking space, maintaining the right distance; then start reversing while keeping an eye on the right rearview mirror. When the tire touches the imaginary reference point, turn the steering wheel sharply to the right; as the car slides diagonally into the space, switch your focus to the left rearview mirror and turn the steering wheel left to straighten out once in position. Finally, stop smoothly and engage the handbrake. During practice, remember to control your speed, operate the clutch gently, and avoid racing mode. Common mistakes during the test include going too fast or too slow—hitting the lines spells trouble. Head to the training ground with friends a few times, get familiar with the markers, and once you pass, it’s celebration time!

Was this review help?
20
Share
Expand All
More Q&A

What is the method for replacing the cabin air filter on the Lynk & Co 01?

The method for replacing the cabin air filter on the Lynk & Co 01 is: 1. Open the glove box and slide down the damper; 2. Press both sides of the glove box to release the clips; 3. Remove the glove box; 4. Locate the cabin air filter inside the glove box and replace it. Taking the 2020 Lynk & Co 01 as an example, it belongs to the compact SUV category with body dimensions of: length 4512mm, width 1857mm, height 1689mm, and a wheelbase of 2734mm, with a curb weight of 1736kg. The 2020 Lynk & Co 01 features a MacPherson strut front suspension and a multi-link rear suspension. It is equipped with a 1.5L turbocharged engine producing a maximum horsepower of 143PS, maximum power of 105kW, and maximum torque of 215Nm, paired with a 7-speed dual-clutch transmission.
105
Share

How to Fix the Airbag Warning Light?

Airbag warning light indicates a potential malfunction in the airbag system. If the airbag warning light comes on while driving, you can continue to drive steadily to the nearest 4S shop or repair shop for inspection. It is normal for the airbag light to illuminate for about 6 seconds and then turn off when the ignition is turned on. Reasons for the airbag warning light to illuminate: 1. Loose or disconnected wiring; 2. False fault, severe battery depletion may cause the airbag to feedback a low voltage signal for a certain airbag, generating a fault code; 3. Water intrusion into the airbag system, leading to unresponsive warning light wiring or circuit short circuit.
101
Share

Does the Airbag Light Affect Driving?

Airbag light illumination does not affect other vehicle functions, so the vehicle can continue to be driven. However, it is not recommended to drive when the airbag light is on, as it may indicate a fault in components such as sensors, processors, electronic control units, the airbag itself, or the airbag module. In such cases, the airbag cannot be triggered and will not provide protection in the event of an accident. Here is more information about the airbag light: 1. If the airbag light continues to flash or stays on for more than 6-8 seconds after the vehicle is started, or if it flashes or stays on while the vehicle is in operation, these conditions indicate a possible fault in the airbag system. 2. The airbag light may also illuminate due to a false fault. If the car battery is low or other electrical equipment in the vehicle is damaged, it could affect the feedback voltage of the airbag safety system, resulting in a fault code. In such cases, clearing the fault code usually resolves the issue.
118
Share

What is the function of engine start-stop technology?

Engine start-stop technology serves the following purposes: 1. It automatically shuts off the engine when the vehicle comes to a temporary stop during driving and restarts the engine when it's time to move forward again. This is a new technology that can automatically control engine shutdown and ignition, aiming to put the engine into automatic hibernation during brief stops to achieve fuel savings and emission reduction. 2. The automatic start-stop function standardizes driving behavior; it won't activate if the seatbelt isn't fastened. Conversely, if the seatbelt is unfastened after stopping, the engine won't restart even if the brake is released or the accelerator is pressed. 3. The automatic start-stop function prioritizes safety and reliability, with fuel efficiency being a secondary consideration. It only delivers its energy-saving and emission-reducing effects when all conditions meet the minimum standards.
101
Share

What to Do When the Car Shows ABS Malfunction?

Car ABS malfunction reasons and solutions are as follows: 1. ABS system: ABS system plug is loose. Solution: Tighten the plug. 2. Vehicle speed sensor: The half-shaft gear ring of the vehicle speed sensor is dirty, stuck with iron filings or magnetic substances. Solution: Clean the half-shaft gear. 3. Battery voltage is too high or the fuse is blown. Solution: If the battery voltage is too high, repair is needed; if the fuse is blown, replacement is required. 4. Poor electronic control device. Solution: Professional repair at a 4S shop is needed. 5. Poor hydraulic regulation device. Solution: Professional repair at a 4S shop is needed.
120
Share

How to reset the tire pressure warning on the VV7?

vv7 tire pressure warning reset method is as follows: 1. First, switch the dashboard to the settings interface; 2. Find the driving data reset option; 3. Press the OK button to enter the reset; 4. Select the tire pressure option and press the OK button again, waiting for the reset to complete. Below is relevant information about the tire pressure warning system: The Tire Pressure Monitoring System (TPMS), fully known as the Automotive Tire Pressure Monitoring System, is a device designed to effectively prevent tire blowouts by monitoring changes in tire pressure during high-speed driving. Its working principle involves installing highly sensitive sensors on all four tires of the vehicle to monitor tire pressure in real-time and dynamically while the car is in motion. The data is then transmitted via radio signals to a receiver, which displays the pressure values digitally. The system can automatically alert the driver to any tire pressure loss caused by various reasons (such as a nail puncturing the tire), enabling timely detection of issues and effectively preventing accidents.
107
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.