What is the method for replacing the cabin air filter on the Lynk & Co 01?

[OAbigail]

The method for replacing the cabin air filter on the Lynk & Co 01 is: 1. Open the glove box and slide down the damper; 2. Press both sides of the glove box to release the clips; 3. Remove the glove box; 4. Locate the cabin air filter inside the glove box and replace it. Taking the 2020 Lynk & Co 01 as an example, it belongs to the compact SUV category with body dimensions of: length 4512mm, width 1857mm, height 1689mm, and a wheelbase of 2734mm, with a curb weight of 1736kg. The 2020 Lynk & Co 01 features a MacPherson strut front suspension and a multi-link rear suspension. It is equipped with a 1.5L turbocharged engine producing a maximum horsepower of 143PS, maximum power of 105kW, and maximum torque of 215Nm, paired with a 7-speed dual-clutch transmission.

[McCamila]

I've been driving the Lynk & Co 01 for several years and am quite familiar with replacing the cabin air filter. It's simple and easy to operate, saving me the trouble of going to a shop. Here are the steps: First, open the glove compartment on the passenger side, press the hooks on both sides to release them, and you'll see the filter compartment cover. Use a Phillips screwdriver to remove the screws and take off the cover, exposing the old filter. Carefully remove it to avoid spreading dust. Note the airflow direction arrow on the side of the filter, which is important to remember. The new filter, specifically designed for the Lynk & Co 01, is affordable online, and I usually opt for an activated carbon one to better filter odors or pollen. When installing, align the arrow with the direction of the airflow into the cabin. After installation, reattach the cover and ensure the screws are tight to prevent air leaks. I make it a habit to replace it every 10,000 kilometers, especially checking more frequently during humid seasons to avoid musty smells that can affect driving mood. Doing it myself takes just ten minutes, even faster than a professional.

[StKatherine]

As a new Lynk & Co 01 owner, I was quite nervous about changing the air conditioning filter myself recently, but found it actually quite safe. Before starting, prepare a Phillips screwdriver and a new filter. Specific steps: Open the glove compartment on the passenger side, gently press down on the left and right clips to release and remove them, avoiding excessive force to prevent damaging plastic parts. Then you'll see a square filter compartment cover; after removing the screws, take out the old filter to compare size and orientation, paying special attention that the arrow direction matches the original (indicating airflow direction) to avoid installing it backward. Press the new filter firmly into place, then reinstall the cover and secure the glove compartment. Avoid wearing gloves during the process to reduce static interference. After replacement, run the AC for a few minutes to check for unusual odors. It's recommended to inspect every six months or during heavy air pollution, as excessive dust can affect health and reduce AC efficiency.

[StJason]

I prioritize in-cabin air quality, so regular replacement of the Lynk & Co 01's cabin air filter is essential. Located behind the glove compartment on the passenger side, the process is straightforward: open the compartment, press the clips to remove it, unscrew to open the filter housing, and take out the old filter. When installing the new filter, ensure the arrow aligns with the airflow direction to avoid ineffective reverse installation. Choose a compatible filter model, preferably HEPA-equipped ones available online to block pollen and dust mites. Replacement frequency varies; in polluted urban areas, consider changing it every three months. DIY replacement saves time and minimizes contact with repair shops.

[GeorgeDella]

To save some money, I learned to replace the Lynk & Co 01's cabin air filter myself, costing just a few dozen yuan which is quite cost-effective. The process is simple: open the glove compartment on the passenger side, press down to release the hooks, remove the rear cover by unscrewing, take out the old filter noting its size, and when buying a new one, choose a Lynk & Co specific or matching model to avoid mistakes. During installation, ensure the arrow on the filter points towards the passenger seat for correct airflow direction - don't install it backwards or the airflow will decrease. The whole process usually takes about two minutes. After replacement, test the AC to enjoy fresh air. It's recommended to replace it quarterly to maintain high efficiency. Online purchases of filters are cheap and often come with tutorial videos for quick learning. Developing a DIY car maintenance habit is beneficial.

[GenesisDella]

During car maintenance, I insist on regularly replacing the cabin air filter to ensure the Lynk & Co 01 performs optimally. The specific steps are: After opening the glove compartment on the passenger side, look inside for the filter housing, press the edges to release the clips and remove the compartment, then use a screwdriver to open the cover and take out the old filter to compare its size with the new one. When installing the new filter, ensure the arrow indicating airflow direction points toward the interior of the car; misalignment will reduce effectiveness. Choosing a high-quality filter can extend its service life. After replacement, check if the air conditioning airflow is smooth. It's recommended to decide based on driving conditions—replace every six months in urban areas, or extend to a year if mostly highway driving. DIY is more convenient than taking it to a shop and helps develop good maintenance habits.