What are the steps for automotive chassis sealing?

1 Answers
LukasRose
07/29/25 4:32pm
The steps for automotive chassis sealing are: 1. Thoroughly clean and dry the asphalt, oil stains, and other contaminants from the car chassis; 2. Use masking paper to cover the engine oil pan, transmission case, exhaust pipe, etc., to avoid spraying; 3. After wrapping the key parts, use a high-pressure spray gun to apply the anti-rust coating evenly on the vehicle chassis, with a thickness between 1mm to 3mm; 4. Wait for 2 to 4 hours after spraying. Chassis sealing involves spraying a highly adhesive flexible rubber resin onto the chassis to isolate it from the external environment, achieving functions such as anti-corrosion, rust prevention, and sound insulation, thereby extending the vehicle's lifespan.
Was this review help?
5
2
Share
More Forum Discussions

What Causes the Shortened Remote Control Distance of a Car Key Fob?

The remote control distance of a car key fob is influenced not only by factors such as the transmitter, battery level of the key, and the car's receiving antenna but also by obstacles around the vehicle, such as trees and walls. Additionally, interference from other signals, such as mobile phone signals, signals from other car keys being used simultaneously, and nearby WiFi signals, can also affect the range. Here is some additional information: 1. The working principle, in simple terms, involves the key emitting a weak radio wave, which is received by the car's antenna. The electronic control unit then identifies the signal code, and the system's actuator (motor or electromagnetic coil) performs the locking or unlocking action. 2. When the owner enters the sensing area of the key system, simply touching the door handle will cause the carried identity-recognition 'key' to receive a low-frequency signal sent by the car. If this signal matches the identity information stored in the 'key,' the 'key' will be activated.
2
4
Share

Can You Still Drive When the Oil Warning Light Comes On?

It is best not to drive when the oil warning light is on. Here are the detailed explanations: 1. If you see the oil pressure indicator light up after starting the car, do not continue driving. The first step is to check the oil dipstick to see if the oil level is normal, and top up the oil if necessary. If you cannot identify the issue, take the car to the nearest repair shop for inspection. 2. If the oil warning light comes on while driving, find a safe place to pull over and check, but this should be limited to inspecting the oil level. If the car is driving normally, you can continue to the nearest 4S shop for maintenance, but remember to drive slowly and carefully. 3. If the oil warning light on the dashboard comes on and the car can still be driven normally, but symptoms like shaking or lack of acceleration occur, continuing to drive may worsen engine wear and even pose risks to life and property. In such cases, it is best to call for a tow truck.
1
4
Share

What are the functions of Volkswagen Car-Net?

Volkswagen Car-Net offers the following functions: 1. Smartphone App Connectivity: The App connectivity features are similar to mainstream functions currently available in the market. For example, after uploading GPS positioning, users can view and plan vehicle locating routes via the app, remotely control flashing lights or honking to locate the car, check remaining range, door/window status and other information, remotely lock/unlock the vehicle, set up electronic fences to define permitted activity zones (the app will send notifications when the vehicle exceeds the designated area), view recent trip records, and receive vehicle malfunction alerts. 2. Network-based Connectivity Functions: The network-based connectivity features are more diverse, such as intelligent voice control supporting media, navigation, communication, air conditioning and other functions. The in-car navigation can display real-time traffic conditions and traffic restriction information, with added destination prediction and online POI search. For audio entertainment, Volkswagen's partners are Kuwo Music and Himalaya FM, both supporting online entertainment.
13
4
Share

Can Power Steering Fluid Be Topped Up?

Power steering fluid can be topped up if it is low, but before adding, it is necessary to check for any leaks. Power steering fluid is a special liquid used in the car's power steering pump. Through hydraulic action, it makes the steering wheel very light to operate, similar to automatic transmission fluid, brake fluid, and shock absorber fluid. Replacement interval for power steering fluid: To prevent the power steering fluid from becoming too dirty or deteriorating, it is recommended to replace the power steering fluid every 2 years or 30,000 kilometers. If the power steering fluid is not replaced for a long time, it can cause damage to the power steering pump and steering gear. Method for replacing power steering fluid: When replacing the power steering fluid, first start the car and use a fluid extractor to remove all the old fluid. Then, pour in the new power steering fluid and turn the steering wheel back and forth to allow the new fluid to circulate and clean the system. For thorough circulation, it is best for the driver to turn the steering wheel fully to the left and right, and then make slight turns left and right. The purpose of repeatedly adding new fluid is to ensure that the old fluid is completely removed before filling with new fluid.
15
1
Share

When should you refuel based on the remaining fuel level in the car?

You should refuel when the pointer reaches the quarter mark on the fuel gauge. This is to protect the fuel pump, as most modern cars use electric fuel pumps and electronic fuel level sensors, which need to be immersed in gasoline for heat dissipation. If there is too little fuel, the fuel pump will not be submerged, significantly affecting heat dissipation. Inadequate cooling can shorten the fuel pump's lifespan or even cause it to burn out. Below is an introduction to engine oil: 1. Engine oil is the lubricant used in the engine. It serves to lubricate and reduce friction, assist in cooling, seal against leaks, prevent rust and corrosion, and act as a shock absorber. Often referred to as the 'blood' of the car, it is composed of base oil and additives. 2. Base oil is the main component of lubricating oil, determining its fundamental properties, while additives compensate for and improve the shortcomings of the base oil, providing new characteristics. Additives are an essential part of lubricating oil.
8
5
Share

Which car is the Volkswagen Passat?

Volkswagen Passat is a mid-size sedan produced by SAIC Volkswagen, with body dimensions of: length 4948mm, width 1836mm, height 1469mm, wheelbase of 2871mm, fuel tank capacity of 68.5 liters, and a body structure of 4-door 5-seater sedan. Passat is the name of this Volkswagen B-segment car in the European market. In North America, the Passat was initially called Dasher (literally translated as 'strong man', meaning 'impact maker'). The second-generation Passat was renamed Quantum/Santana. The subsequent third, fourth, and fifth-generation models were all named 'Passat', with only the suffix numbers adjusted to indicate their identity. In terms of configuration, the Volkswagen Passat is equipped with a 1.4T turbocharged engine, with a maximum power of 118 kW and a maximum power speed of 4500 to 6200 rpm. It is paired with a 7-speed dual-clutch transmission. The front suspension uses a MacPherson independent suspension, and the rear suspension uses a multi-link independent suspension.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.