What Are the Solutions for Wiper Noise?

2 Answers
LunaMarie
07/29/25 2:39am
Solutions for wiper noise include checking and cleaning debris from the wiper blades or beneath the wipers, replacing the wipers, and inspecting or replacing the wiper arm or wiper linkage bushings. Generally, wiper blades are recommended to be replaced every one to two years. Specific solutions for wiper noise are as follows: Noise caused by debris between the wiper blade and the windshield. When the wiper is activated, a sharp friction sound may occur between the wiper blade and the windshield. Owners can check and clean any debris from the wiper blade or beneath the wiper to ensure the wiper area remains clean. Noise from friction in the wiper linkage bushings. Over time, the wiper linkage mechanism may age, the wiper arm spring may lose elasticity, and the bushings may wear out or even fall off. It is necessary to inspect and replace the wiper arm or wiper linkage bushings. Noise caused by issues with the wiper blade itself. Wiper blades are rubber products and may harden or age after prolonged use, especially in winter. If the wiper does not clean effectively, the simplest and most effective solution is to directly replace the wiper blades.
Was this review help?
15
2
Share
AvaFitz
08/12/25 6:36am
I've been driving the same car for over a decade and have encountered wiper noise issues several times, so I've compiled some practical solutions. Usually, the noise comes from oil or dust on the windshield surface. I start by wiping the windshield clean with a damp cloth, paying special attention to the areas where the wipers make contact. If the noise persists, it might be due to aging wiper blades—hardened or cracked rubber—in which case replacing them with new ones does the trick. It costs just a few dozen bucks and is a simple DIY job. For safety, regular checks are crucial—replacing blades before the rainy season can prevent visibility risks. Also, water stains on the glass can cause noise; try spraying some dedicated glass cleaner. Once, I neglected this, and the noise distracted me dangerously on the highway. Now, I make it a habit to clean the glass and wipers every six months to keep things quiet.
Was this review help?
8
2
Share
Expand All
More Forum Discussions

Can You Drive When the Engine Temperature Hasn't Risen?

You should not drive when the engine temperature hasn't risen. Here are the details: 1. After a car has been parked for a long time, the engine oil inside has mostly flowed back to the oil pan, and the oil film on the friction surfaces of the engine is largely destroyed. At the moment of startup, friction causes relative motion, but the oil pump hasn't yet delivered oil to the friction surfaces in time. This results in dry friction on the friction surfaces, meaning the engine experiences the most wear during the cold start phase. 2. Because low engine temperature increases engine wear, there should be a warm-up process after a cold start. After starting the vehicle, let the engine idle at a high speed automatically. Wait until the idle speed drops to the normal value (around 800 rpm) before driving. Before the engine temperature reaches the normal value, avoid exceeding 2500 rpm, keep the engine load under 30%, and refrain from aggressive driving such as rapid acceleration or hard braking. 3. Only after the engine temperature reaches the normal range (80°C--90°C) should you drive normally.
20
3
Share

Why is the Toyota C-HR's body so heavy?

Toyota C-HR is essentially a product of Toyota's effort to enhance body strength while controlling costs as much as possible. The reason for its weight is the extensive use of high-strength steel, which is why vehicles based on Toyota's TNGA platform perform well in crash tests. A heavier body provides better stability at high speeds. Factors affecting a car's stability at high speeds include: 1. Vehicle tires: Tires are the only components in contact with the ground. Generally, wider and flatter tires improve stability at high speeds; 2. Vehicle shape: The vehicle's shape also affects high-speed stability. The more aerodynamic the vehicle, the better its stability at high speeds; 3. Drive configuration: Most vehicle drive configurations include front-wheel drive, rear-wheel drive, and four-wheel drive. Four-wheel drive vehicles are more stable than front or rear-wheel drive vehicles; 4. Suspension system: Generally, vehicles with independent suspension systems are more stable than those with non-independent suspension systems. Independent suspensions include MacPherson strut and multi-link independent suspensions, among others.
2
0
Share

What brand is Hanlong Kuangshi?

Hanlong Kuangshi is a brand under Hanlong Auto. The company was established on January 7, 2016, with the full name Hubei Dori Hanlong Automobile Co., Ltd. Its headquarters is located in Daye City, Hubei Province. The company specializes in the production and development of fuel-powered vehicles and new energy vehicles, making it a modern automobile manufacturer. More details are as follows: 1. Equipped with a 2.0-liter four-cylinder turbocharged engine, it delivers a maximum horsepower of 218, a maximum power of 160 kW, and a maximum torque of 370 N·m. 2. Paired with an 8-speed automatic transmission, the official 0-100 km/h acceleration time is 9.19 seconds. The two-wheel-drive model has a combined fuel consumption of 8.9 L/100 km as per the MIIT, while the four-wheel-drive model has a combined fuel consumption of 9.2 L/100 km.
19
0
Share

What are the center console buttons in the old Land Cruiser Prado?

Here is an introduction to the buttons in the Toyota Land Cruiser Prado: 1. Hazard warning light: Commonly known as the double flash, it should be turned on in emergencies to warn other vehicles and prevent rear-end collisions. 2. Volume adjustment buttons: In addition to the normal knob for adjusting the volume, swiping left or right can also change songs. 3. Parking radar image: Provides alerts and visual feedback to help the driver detect surrounding obstacles. 4. Auto Hold: Reduces foot fatigue at traffic lights by automatically locking the wheels with the brake calipers. 5. Auto Start-Stop: Temporarily turns off the engine. The vehicle will continue moving when the driver releases the brake. 6. Air recirculation: Internal recirculation uses air from inside the vehicle, while external recirculation brings in outside air to replace the existing cabin air. 7. Temperature zone sync: When this function is enabled, changing the temperature in the driver's area will automatically adjust the other zones to the same temperature.
15
3
Share

What are the symptoms of a bad car charcoal canister?

When the charcoal canister fails, the car may exhibit symptoms such as weak acceleration, abnormal noises while driving, fuel line leaks, difficulty starting the engine, and increased fuel consumption. Details are as follows: 1. Weak car acceleration: When the car shows symptoms like unstable idling and weak acceleration, it is usually due to a clogged air filter screen of the charcoal canister. In this case, it should be cleaned, and the air filter screen should be replaced if necessary. 2. Abnormal noises while driving: If the vehicle makes a "clicking" noise while driving, it may be caused by an abnormal switch of the charcoal canister's solenoid valve. In this situation, it should be repaired or replaced. 3. Fuel line leaks: If there is a strong fuel smell while driving, it may be due to damage to the fuel system of the charcoal canister, causing fuel vapor to be directly released into the atmosphere. 4. Difficulty starting the engine: Damage to the solenoid valve of the charcoal canister can also cause abnormal concentration of the internal gas mixture, leading to difficulty starting the car engine. 5. Increased fuel consumption: Similarly, after the solenoid valve of the charcoal canister is damaged, the internal gas concentration becomes too high, causing the vehicle to flood and resulting in increased fuel consumption.
6
3
Share

What are the dimensions of Jinbei?

Jinbei Classic comes in two models: standard van and long cargo van. The standard van has a length of 4995mm, width of 1700mm, height of 1710mm, and a wheelbase of 3025mm. The long cargo van has a wheelbase that is 355mm longer than the standard van, with all the additional length allocated to the cargo compartment depth, providing greater cargo space. Here is some extended information about Jinbei: 1. Introduction to Huachen Jinbei: Huachen Jinbei Automobile Co., Ltd., formerly known as Shenyang Jinbei Passenger Vehicle Manufacturing Co., Ltd., was renamed in January 2003 and is a key production enterprise under Brilliance China Automotive Holdings Ltd. Shenyang Jinbei Passenger Vehicle Manufacturing Co., Ltd. is a joint venture established by Brilliance China Automotive Holdings Ltd. and Shenyang Jinbei Automobile Co., Ltd. 2. The company's main products include: various light vehicle transmissions, front and rear axle assemblies, brake pump assemblies, and fuel tank assemblies, totaling 29 categories and 130 varieties.
1
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.