What are the solutions for the abnormal noise in Peugeot 5008?

1 Answers
Kyle
07/29/25 11:45pm
Solutions for the abnormal noise in Peugeot 5008 are as follows: 1. Abnormal noise from the air vents: Check if the air vents are loose or if the noise is caused by an installed perfume bottle. Tighten them or pad the edges with materials like 3M tape. 2. Abnormal noise due to loose central control panel: This situation is rare. The solution is to disassemble and re-tighten or wrap tape around the clips. Below is relevant information about Peugeot: 1. Introduction: Peugeot is a car brand under Peugeot Automobile Company, a subsidiary of the French PSA Peugeot Citroën Group. Peugeot Automobile Company is a long-established automobile manufacturer in Europe. 2. Logo meaning: The emblem of Peugeot is a standing lion. This lion has appeared on Peugeot products for 150 years. The lion can be seen on the engine cover or front grille of Peugeot cars.
Was this review help?
2
0
Share
More Forum Discussions

What is the Leading Enterprise in New Energy Vehicle Battery Shell Manufacturing?

Different manufacturers have their own advantages, and there is currently no single leading enterprise. Introduction to New Energy Vehicles: New energy vehicles refer to vehicles that use unconventional vehicle fuels as power sources (or use conventional vehicle fuels with new types of on-board power devices), integrating advanced technologies in vehicle power control and driving, resulting in vehicles with advanced technical principles, new technologies, and new structures. New energy vehicles include pure electric vehicles, extended-range electric vehicles, hybrid electric vehicles, fuel cell electric vehicles, hydrogen engine vehicles, etc. Definition of New Energy Vehicles: Based on the scope, new energy vehicles can be divided into broad and narrow definitions. Broadly defined new energy vehicles, also known as alternative fuel vehicles, include vehicles that entirely use non-petroleum fuels such as pure electric vehicles and fuel cell electric vehicles, as well as vehicles that partially use non-petroleum fuels like hybrid electric vehicles and ethanol gasoline vehicles. Narrowly defined new energy vehicles can refer to the regulations in the national "New Energy Vehicle Manufacturing Enterprise and Product Access Management Rules," which define new energy vehicles as those that use unconventional vehicle fuels as power sources, integrating advanced technologies in vehicle power control and driving, resulting in vehicles with new technologies, new structures, and advanced technical principles.
1
3
Share

Reasons for the Muffled Sound When Pressing the Accelerator Hard in Roewe 350

Roewe 350 produces a muffled sound when the accelerator is pressed hard due to engine friction. Below is an introduction to Roewe vehicles: 1. Roewe: The Roewe 350 is a compact sedan positioned in the A-segment market, launched by SAIC Motor following previous models. It is also the first family car from Roewe to incorporate 3G technology. 2. Powertrain: Compared to the older 350 model, the 2014 Roewe 350 underwent technical upgrades in fuel economy. Through the application of new technologies, improvements were made to the chassis, engine, and transmission, reducing fuel consumption to just 6.9L, a 12% decrease from the older 350 model. The 2014 350 transmission added Tiptronic technology, offering four driving modes: D, S, M, and W. 3. Exterior Design: Based on the sporty design of the Roewe N1 concept car, the Roewe 350 features a globalized styling. As the first compact car in the Roewe family, it inherits some design genes from its larger siblings, the 550 and 750.
3
4
Share

What causes the lack of power when climbing a slope and unresponsiveness to acceleration in a Focus?

The reasons for the lack of power when climbing a slope and unresponsiveness to acceleration are as follows: 1. Engine fuel system malfunction: The engine fuel system is a common source of problems in cars. Clogged fuel injectors, leaking fuel lines, reduced fuel pump performance, or a blocked fuel filter can all lead to a lack of power when climbing slopes. The feeling of powerlessness mainly occurs because the engine does not receive enough fuel during uphill driving, resulting in decreased combustion efficiency and insufficient horsepower. 2. Air intake system malfunction: The same applies to the air intake system. Besides fuel, the engine also requires air. If components like the air filter or throttle become clogged or malfunction, leading to insufficient air intake, the car will also lack power when climbing slopes. 3. Spark plug malfunction: Spark plugs are also a common source of issues. If a spark plug fails to ignite properly, it can cause acceleration problems. 4. Engine malfunction: At least one cylinder in the car's engine may not be functioning properly or may have shut down. Generally, in a four-cylinder engine, if one cylinder fails to fire, the engine can still operate. However, as the number of cylinders increases, such symptoms become harder to detect.
2
2
Share

Are There Motorcycles That Don't Require Gear Shifting?

There are motorcycles that don't require gear shifting, specifically those equipped with continuously variable transmissions (CVT). Continuously Variable Transmission (CVT): CVT is a type of automatic transmission system that can continuously obtain any transmission ratio within its range, achieving optimal matching between the drivetrain and engine conditions. Advantages of CVT: The seamless acceleration eliminates "gear shift shock," providing a smoother riding experience. Regardless of the vehicle's speed, it maintains the optimal power range, improving fuel efficiency and flexibly responding to changing conditions.
17
5
Share

What are the driving techniques for SUVs?

SUV driving techniques are introduced as follows: 1. Anticipatory deceleration and stopping: Decelerate or stop with anticipation, allowing ample time for the brakes to take effect, downshift to utilize engine braking for deceleration, and apply brakes continuously to prevent wheel lock-up or skidding. Four-wheel drive can safely drive up slippery slopes, but it is no safer than two-wheel drive when descending. On slippery surfaces, deceleration performance is the same regardless of four-wheel drive. 2. Be cautious on dry roads: Using four-wheel drive mode on dry roads is harmful to the vehicle and causes rapid tire wear. Some SUVs with full-time four-wheel drive or all-wheel drive perform well on dry roads, but part-time high-range four-wheel drive should not be used on highways. 3. Avoid shifting into low-range four-wheel drive while moving: Shifting into low-range four-wheel drive while in motion can severely damage the transfer case. The correct method is to come to a complete stop before engaging low-range four-wheel drive. Most four-wheel-drive vehicles require depressing the clutch or shifting the transmission into neutral or park when switching the transfer case to low-range four-wheel drive. 4. Avoid taking turns too quickly: Remember that SUVs have a higher center of gravity than sedans, especially those equipped with larger tires or lift kits to improve off-road capability. Therefore, SUVs are more prone to skidding or even rolling over in curves and sharp turns. SUVs are not sedans and are not suitable for fast cornering.
13
2
Share

Is the Crown a Rear-Wheel Drive Vehicle?

The Crown is a rear-wheel drive vehicle, which offers better handling and acceleration performance. Taking the 2018 Crown as an example, its body dimensions are: length 5020mm, width 1805mm, height 1480mm, with a wheelbase of 2925mm, a fuel tank capacity of 70 liters, and a trunk capacity of 510 liters. The 2018 Crown features a double-wishbone independent front suspension and a multi-link independent rear suspension. It is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 235 PS, a maximum power of 173 kW, and a maximum torque of 350 Nm, paired with an 8-speed manual-automatic transmission.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.